Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Not getting all data on A10
#1
Not getting all data on A10
So after fighting with SleepyHead and my firewall, I finally have SH 1 installed (as well as SH .9). SH 1 is seeing the data from the S9 Autoset and is now reading the card from the new(ish) A10 Autoset.

But I'm not seeing the data I thought I would. Shouldn't there be more?

   
PaulaO

Take a deep breath and count to zen.




Post Reply Post Reply
#2
RE: Not getting all data on A10
Not sure what you mean. Did you sleep longer than 8-1/2 hours? Or do you mean you expected more charts? You can enable display of more charts than what is in your screenshot.
Post Reply Post Reply
#3
RE: Not getting all data on A10
It was my understanding I should see things like RERA, on the left. That the A10s reported more.

Edited to add: here is a screenshot of someone else's data. We have the same machine.

   
PaulaO

Take a deep breath and count to zen.




Post Reply Post Reply
#4
RE: Not getting all data on A10
You will only see Rera if the machine scores any, once it raises event flags for the first time then it will appear in sleepyhead, with a subsequent value of 0.0 if none scored. This is a feature of sleepyhead and nothing wrong with your machine.


Jason
Post Reply Post Reply
#5
RE: Not getting all data on A10
You may wish to check your SH settings to see if all of the desired events and waveforms are checked for display ...

- File
-----Preferences
---------Events (check desired data items)
---------Waveforms (check desired data elements)
---------Appearances (check Show Event Breakdown Pie Chart)

You may have to rebuild your data after new selections ...

- Data
---Rebuild CPAP Data (Be sure to select the correct machine if multiple machines are displayed.)
"The object in life is not to be on the side of the majority, but to escape finding oneself in the ranks of the insane." -- Marcus Aurelius
Post Reply Post Reply
#6
RE: Not getting all data on A10
(03-12-2018, 12:26 AM)jaswilliams Wrote: You will only see Rera if the machine scores any, once it raises event flags for the first time then it will appear in sleepyhead, with a subsequent value of 0.0 if none scored. This is a feature of sleepyhead and nothing wrong with your machine.


Jason

Ah! That makes sense. So not seeing it is a good thing. Thanks for answering!

(03-12-2018, 12:28 AM)srlevine1 Wrote: You may wish to check your SH settings to see if all of the desired events and waveforms are checked for displayed ...

- File
-----Preferences
---------Events (check desired data items)
---------Waveforms (check desired data elements)
---------Appearances (check Show Event Breakdown Pie Chart)

You may have to rebuild your data after new selections ...

- Data
---Rebuild CPAP Data (Be sure to select the correct machine if multiple machines are displayed.)

Okay. Did that. Thanks!
PaulaO

Take a deep breath and count to zen.




Post Reply Post Reply
#7
RE: Not getting all data on A10
You may also want to check the manufacture date of your A10. Somewhere on the bottom of machine, I think.
Some of the older A10's didn't report RERA's.

But as srievine1 points out, check the File...Preferences settings. Also, check the bottom of the Daily page on the left and be sure all the Flags are clicked on.
OpalRose
Apnea Board Administrator
www.apneaboard.com

_______________________
OSCAR Chart Organization
How to Attach Images and Files.
OSCAR - The Guide
Soft Cervical Collar
Optimizing therapy
OSCAR supported machines
Mask Primer



INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE.  ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA.  INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#8
RE: Not getting all data on A10
jaswilliams is correct as long as RERA is listed in the event flag drop down list it'll show up once scored as an event.
Download SleepyHead
Organize your Sleepyhead Charts
Posting Charts
Beginner's Guide to SleepyHead
Mask Primer
5
Advisory Members serve as an "Advisory Committee" to help shape Apnea Board's rules & policies.

Membership in the Advisory Members group does not imply medical expertise or qualification for advising Sleep Apnea patients concerning their treatment.



Post Reply Post Reply
#9
RE: Not getting all data on A10
It (RERA) showed up today. The SN of my machine is 231718xxxxx. So it was made in Singapore last year.

   
PaulaO

Take a deep breath and count to zen.




Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Doctor says perfect data, but extremely tired - OSCAR Data Auzzyrocks 13 2,651 12-04-2022, 11:25 AM
Last Post: Lucid
Question [Pressure] Doctor can't see detailed data - Can my OSCAR data save me from another sleep study? KidCharlamagne 5 896 09-28-2022, 08:20 AM
Last Post: Gideon
  [CPAP] Data showing clear airway apneas: central apnea or soft palate collapse? Data inc. JamesD0079 0 800 03-21-2022, 07:50 PM
Last Post: JamesD0079
  Dreamstation CPAP vs Aircurve BiPap data? Data over time for Insp/Exp? Desiree 12 2,283 05-20-2020, 10:00 PM
Last Post: Sleeprider
  IF I insert an SD card to get data for Sleepyhead will my ResMed still send data theMezz 3 2,072 04-20-2018, 07:52 PM
Last Post: theMezz
  Data viewer for 960 BiPAP AutoSV / Missing data pswartz 5 4,059 10-06-2014, 02:31 PM
Last Post: pswartz


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.