Post Reply 
AirFit P10
Author Message
retired_guy Offline

Preferred Members-2

Posts: 2,744
Joined: Jan 2014

Machine: ResMed S9 Autoset
Mask Type: Nasal pillows
Mask Make & Model: Resmed Airfit P10
Humidifier: ResMed
CPAP Pressure: 10.6/14, EPR 3
CPAP Software: ResScan SleepyHead

Other Comments: Is it bedtime yet?

Sex: Male
Location: Beautiful, albeit very wet Oregon Coast

Post: #1
AirFit P10
Well I seem to have settled on a mask finally. At least for now. It's the Resmed Airfit P10.

The thing is, I have to wear a chinstrap with it, or any other mask for that matter to keep the leak thing under control.

But by putting the chinstrap on first, then the P10, I get a comfortable fit and a near-perfect seal.

Herb has espoused the virtues of this little mask for awhile around here, and he's pretty much right on. One of the things he mentioned was that he tried and got a good seal with the large nose thingy instead of just staying with the medium. With the medium I was having a problem with one of the nostril thingys leaking a bit when I'd turn over, and I didn't like that all that much. So I tried the large, and by gum once again Herb hit the head on the nail! It seals very nicely and I very often end up checking the machine because it doesn't seem like it's turned on. But it is, and it's really working well.

The other thing I did was since my AHI's have been behaving so nicely, I thought I'd shake things up a bit. So last night I dropped my pressures from 12/15 to 11/13, and my ramp time to 5 minutes. That worked fine as my ahi's came up to around 1.0..... So that's ok, and with the slightly lower average pressure I don't have that "full" feeling this morning.

So thanks Herb for continuing to harp about the little P10. It does work very well for me. I'm sorry it doesn't work better for Paula, but that just reinforces the thingy that everyone is different.

Actually that's not true. I'm not different. Everyone else is different, but not me. I'm not different.
04-07-2014 11:22 AM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
gjw Online

Preferred Members

Posts: 60
Joined: Dec 2012

Machine: ResMed S9 AutoSet
Mask Type: Nasal pillows
Mask Make & Model: ResMed AirFit P10
Humidifier: Hi5 with ClimateLine Hose
CPAP Pressure: 8-15
CPAP Software: ResScan SleepyHead

Other Comments:

Sex: Male
Location: Switzerland

Post: #2
RE: AirFit P10
Hi retired_guy

Good to hear that the AirFit P10 works well fir you.
I am still waiting for the mask becoming available here in Switzerland. So far neither ResMed nor the DME have been able to give a date concerning the availability in Switzerland.
So I am still stuck using either the Swift FX Nano or Swift FX masks for now.

;-> gjw
04-07-2014 12:04 PM
Find all posts by this user Post Reply Quote this message in a reply
Gabby Offline

Preferred Members-2

Posts: 664
Joined: Dec 2013

Machine: ResMed AirSense 10 AutoSet For Her
Mask Type: Nasal pillows
Mask Make & Model: Philips Nuance Nasal Mask
Humidifier: ResMed AirSense 10 For Her
CPAP Pressure: 8-14
CPAP Software: SleepyHead

Other Comments:

Sex: Female
Location: Sunshine Coast, Qld., Australia.

Post: #3
RE: AirFit P10
How come you guys seem to have instant success with the P10?

I think it is the most comfortable mask I have worn but am still concerned about fit and leaks.
I would love to be able to tighten it more.
I, too think think I need the large pillow and have ordered one but have to wait two weeks for delivery from the U.S.
I am hoping for a better fit once I receive the larger pillow.

That is great news retired_guy that you have had great success with this little beauty.

Sleep Tight...
Gabby
04-07-2014 04:49 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
DocWils Offline

Members-b

Posts: 1,271
Joined: Jul 2012

Machine: Philips Remstar series 60
Mask Type: Nasal pillows
Mask Make & Model: ResMed P10
Humidifier: same as machine
CPAP Pressure: 5-15
CPAP Software: SleepyHead

Other Comments:

Sex: Male
Location: Switzerland

Post: #4
RE: AirFit P10
(04-07-2014 12:04 PM)gjw Wrote:  Hi retired_guy

Good to hear that the AirFit P10 works well fir you.
I am still waiting for the mask becoming available here in Switzerland. So far neither ResMed nor the DME have been able to give a date concerning the availability in Switzerland.
So I am still stuck using either the Swift FX Nano or Swift FX masks for now.

;-> gjw

Same here - I asked the LungenLiga, but they had no clue. In fact, they had never heard of it, nor did the Unispital.
04-07-2014 04:54 PM
Find all posts by this user Post Reply Quote this message in a reply
gjw Online

Preferred Members

Posts: 60
Joined: Dec 2012

Machine: ResMed S9 AutoSet
Mask Type: Nasal pillows
Mask Make & Model: ResMed AirFit P10
Humidifier: Hi5 with ClimateLine Hose
CPAP Pressure: 8-15
CPAP Software: ResScan SleepyHead

Other Comments:

Sex: Male
Location: Switzerland

Post: #5
RE: AirFit P10
(04-07-2014 04:54 PM)DocWils Wrote:  Same here - I asked the LungenLiga, but they had no clue. In fact, they had never heard of it, nor did the Unispital.


Hi DocWils

Well my contact at the LungenLiga Zürich was aware of the AirFit P10, but had no idea as to when they would get any in stock. ResMed Switzerland said they would contact me via mail, once they hade a date regarding the availability of the AirFit P10.

;-> gjw
04-07-2014 11:41 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
PaulaO2 Offline
Wiki Editor
Moderators

Posts: 8,065
Joined: Feb 2012

Machine: S9 Autoset
Mask Type: Full face mask
Mask Make & Model: F&P Simplus
Humidifier: H5i
CPAP Pressure: 14-20
CPAP Software: SleepyHead

Other Comments: Ehlers-Danlos Syndrome, Hypermobility Type; chronic sarcasm

Sex: Undisclosed
Location: western NC, USA

Post: #6
RE: AirFit P10
Glad it is working out for you, retired guy!

When you have the time, could you please do a review of the mask?
http://www.apneaboard.com/forums/Thread-Resmed-AirFit-P10

Be sure to read the guidelines.
http://www.apneaboard.com/forums/Thread-...orum--5546

I'll be adding my own review of this mask soon.

PaulaO2
Apnea Board Moderator
www.ApneaBoard.com


Breathe deeply and count to zen.

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
04-07-2014 11:53 PM
Find all posts by this user Post Reply Quote this message in a reply
retired_guy Offline

Preferred Members-2

Posts: 2,744
Joined: Jan 2014

Machine: ResMed S9 Autoset
Mask Type: Nasal pillows
Mask Make & Model: Resmed Airfit P10
Humidifier: ResMed
CPAP Pressure: 10.6/14, EPR 3
CPAP Software: ResScan SleepyHead

Other Comments: Is it bedtime yet?

Sex: Male
Location: Beautiful, albeit very wet Oregon Coast

Post: #7
RE: AirFit P10
(04-07-2014 11:53 PM)PaulaO2 Wrote:  Glad it is working out for you, retired guy!

When you have the time, could you please do a review of the mask?
http://www.apneaboard.com/forums/Thread-Resmed-AirFit-P10

Be sure to read the guidelines.
http://www.apneaboard.com/forums/Thread-...orum--5546

I'll be adding my own review of this mask soon.

Ok, I'll do that. Can I use informal terms like "it's gooder than others..." or should I stay with more formal stuff like "it's hunky-dorie."
04-07-2014 11:58 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
herbm Offline

Preferred Members-2

Posts: 852
Joined: Jan 2014

Machine: ResMed AutoSet S9
Mask Type: Oral
Mask Make & Model: ResMed Airfit P10 Nasal Pillow
Humidifier: ResMed H5i
CPAP Pressure: 11-16
CPAP Software: ResScan SleepyHead

Other Comments: Backup Mask: Innomed Hybrid FFM -- Oral+Nasal Pillows

Sex: Male
Location: Austin, TX

Post: #8
RE: AirFit P10
Funny thing is, I don't remember recommending the large pillows Smile

I do remember saying that everyone should try EVERY SIZE, sleep with the best one a few nights, then go back and try them all again.

So far every pillow has WORKED well for me, and the one that seemed the least likely is the one that gets used 6 nights out of 7 -- the small. Mostly at first because it seemed to delivery lower AHI.

If you have an almost snug fit, you might not benefit from tighter. It's certain that were it possible then I would be tightening the P10 down quite a bit, but by having to wear it "as is" it turns out that loose works just fine (not sloppy, just loose -- 2 martinis, not a 5th of gin.)

Seriously, the thing is not even snug, but luckily that is just a perfect fit for my silly head.

Talk about lucky. Maybe that should be my middle name.

Oh, what this about "harping"? Wink

Sweet Dreams,

HerbM
Sleep study AHI: 49 RDI: 60 -- APAP 10-11 w/AHI: 1.5 avg for 7-days (up due likely to hip replacement recovery)

"We can all breathe together or we will all suffocate alone."
04-08-2014 12:40 AM
Find all posts by this user Post Reply Quote this message in a reply
DocWils Offline

Members-b

Posts: 1,271
Joined: Jul 2012

Machine: Philips Remstar series 60
Mask Type: Nasal pillows
Mask Make & Model: ResMed P10
Humidifier: same as machine
CPAP Pressure: 5-15
CPAP Software: SleepyHead

Other Comments:

Sex: Male
Location: Switzerland

Post: #9
RE: AirFit P10
(04-07-2014 11:41 PM)gjw Wrote:  
(04-07-2014 04:54 PM)DocWils Wrote:  Same here - I asked the LungenLiga, but they had no clue. In fact, they had never heard of it, nor did the Unispital.


Hi DocWils

Well my contact at the LungenLiga Zürich was aware of the AirFit P10, but had no idea as to when they would get any in stock. ResMed Switzerland said they would contact me via mail, once they hade a date regarding the availability of the AirFit P10.

;-> gjw

I am pretty sure your contact knew of it because I had had them search for it the moment the mask was announced. They don't keep on top of things there, machine and mask wise, unless you nudge them. Normally they wait for the manufacturers to send around either a representative or a brochure and then disseminate it to the various branches. I asked them about the mask more than two months ago, AFAIR. I didn't bother to contact ResMed though, as my normal channels of supply are through the LL or the hospital. One of the advantages of wearing a white coat, I guess (okay, I never wear one, I hate them, but you get the idea).

BTW, I didn't know we had another Swiss member here. Hiya! And isn't it wonderful, the international make-up of our little forum? The Internet is truly an amazing thing.
(This post was last modified: 04-08-2014 03:58 AM by DocWils.)
04-08-2014 03:55 AM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
DocWils Offline

Members-b

Posts: 1,271
Joined: Jul 2012

Machine: Philips Remstar series 60
Mask Type: Nasal pillows
Mask Make & Model: ResMed P10
Humidifier: same as machine
CPAP Pressure: 5-15
CPAP Software: SleepyHead

Other Comments:

Sex: Male
Location: Switzerland

Post: #10
RE: AirFit P10
herbm - I tack my hose up over my head to the wall - can't stand it hanging down around my body. With the FX that isn't an issue due to the easy swivel, but how do you think the AF10 will do in that regard with no swivel and no top of head strap to secure the hose to?

I am always interested in a better mask, but I have to admit with all the mods I have made to my FX, it is now comfortable, quiet and doesn't blow hard on anything (took a bit for doing and 3D milling for that, though). Still, I WANT TO TRY IT! NEW TOY!!!!! NEW TOY NOW!!!!
(This post was last modified: 04-08-2014 04:02 AM by DocWils.)
04-08-2014 04:01 AM
Find all posts by this user Post Reply Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  New Resmed AirFit F20, & N20 Masks gjw 24 2,544 Yesterday 12:19 PM
Last Post: sonicboom
  Question for Airfit F10 Users PaytonA 2 145 12-03-2016 05:29 PM
Last Post: PsychoMike
  airfit P10 sore nose duece12345 12 622 12-03-2016 09:46 AM
Last Post: Sleeprider
  AirFit P10 Headgear Clips gjw 22 706 11-19-2016 12:11 PM
Last Post: sonicboom
  Airfit P10 love but need something else Chrstauffe 80 8,873 11-07-2016 05:55 PM
Last Post: Gabby
  Airfit P10 - condensation collects on exhale ports Possum 7 382 11-02-2016 02:54 PM
Last Post: Possum
  Resmed AirFit P10 Acceptable Leak Rate jimchi 1 352 10-30-2016 09:30 PM
Last Post: Sleeprider

Forum Jump:

Who's Online (Complete List)