I have the tube 'trapped' under my pillow, but of course some movement still makes it to the machine. I just don't see why on earth you would design such a function into a CPAP machine, when we all move around frequently through the night, and I don't recall this happening until a few weeks ago.
Hello Guest,
Welcome to Apnea Board !As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address. Login or Create an Account
Airsense 10 Autoset problem?
|
12-10-2021, 02:03 AM
RE: Airsense 10 Autoset problem?
Thanks again.
I have the tube 'trapped' under my pillow, but of course some movement still makes it to the machine. I just don't see why on earth you would design such a function into a CPAP machine, when we all move around frequently through the night, and I don't recall this happening until a few weeks ago.
12-10-2021, 12:04 PM
RE: Airsense 10 Autoset problem?
(11-05-2021, 01:34 AM)StevesSp Wrote: Contacts are clean and shiny, but I will clean them with a little solvent when I get home (currently away for a few days, photographing an event). Old photographers trick.....with my Nikon F2's and F3's I would clean the batteries and contacts with a pencil eraser to restore them when I had a problem. I also carried spare batteries. Last night I put my SD card back in the S10 I have. The display lit up. Crazy idea--try cleaning the contacts on your SD card with a pencil eraser; then wipe the SD card clean. My S10 doesn't light up during the night once I start my treatment. Don't know why your machine would. I have auto-start turned off. Once I have my mask on, i turn my S10 on myself. It lights up and starts. I don't have RAMP enabled. The light goes out after a bit and stays out. Hope this helps.
DaveL
compliant for 35 years /// Still trying! I'm just a cpap user like you. I don't give medical advice. Seek the advice of a physician before seeking treatment for medical conditions including sleep apnea. http://www.apneaboard.com/wiki/index.php..._The_Guide
12-10-2021, 12:44 PM
RE: Airsense 10 Autoset problem?
Yes, the copper contacts can have an oxidation layer build up over time. This can be caused by oil transference while touching the contact pads. This can elevate resistance in the connection to a point where it is no longer functional. Using an eraser will serve as a nonabrasive means to remove this oxidation layer.
Crimson Nape
Apnea Board Moderator www.ApneaBoard.com ___________________________________ Useful Links -or- When All Else Fails: The Guide to Understanding OSCAR OSCAR Chart Organization Attaching Images and Files on Apnea Board Apnea Helpful Tips INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
12-10-2021, 01:34 PM
RE: Airsense 10 Autoset problem?
StevesSP,
The display light on my AirCurve does not come on during the night. It only comes on if I get up and remove mask. Once back in bed, the light stays off. And I move a lot during the night. I think there must be a defect with your machine, regardless what DME/supplier says.
OpalRose
Apnea Board Administrator www.apneaboard.com _______________________ OSCAR Chart Organization How to Attach Images and Files. OSCAR - The Guide Soft Cervical Collar Optimizing therapy OSCAR supported machines Mask Primer INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
12-10-2021, 01:38 PM
RE: Airsense 10 Autoset problem?
Maybe you can fix the light with automotive check engine light tape. AKA a few squares of electrical tape.
INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEBSITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
12-10-2021, 01:40 PM
RE: Airsense 10 Autoset problem?
(12-10-2021, 01:34 PM)OpalRose Wrote: StevesSP,The same is true for my airsense 10 Autoset.
Download OSCAR
Organize Charts Attaching Charts Mask Primer Soft Cervical Collar INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
12-10-2021, 04:52 PM
RE: Airsense 10 Autoset problem?
Thanks folks. I have replied to the seller explaining that I am in contact with other users who do not see this behavior and so do not accept that this is normal. I have requested further advice.
Once again this forum empowers users. Once upon a time, I would have been unable to canvass other owners of my machine and so might have just accepted their response. |
« Next Oldest | Next Newest »
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
Suggested Settings Switching AirSense 10 CPAP to AirSense 11 APAP | Rickyricardo | 3 | 159 |
04-20-2024, 04:55 PM Last Post: Rickyricardo |
|
N30i [what mask setting] Airsense 10 AutoSet | Topdogg7505 | 8 | 3,230 |
04-20-2024, 10:02 AM Last Post: ahfairley |
|
New CPAP User - Help Please - ResMed Airsense 11 Autoset | Pawpri | 53 | 1,541 |
04-18-2024, 05:25 PM Last Post: Pawpri |
|
Need help with Airsense 10 AutoSet | JonUK | 2 | 215 |
03-25-2024, 06:11 PM Last Post: JonUK |
|
AirFit F30i Mask Problem | OldTeacher | 22 | 5,015 |
03-23-2024, 03:23 PM Last Post: ButtonNoseBarbie |
|
[Equipment] Should I turn on the AB Filter option on my AirSense 10 AutoSet for these filters? | cLoo | 10 | 1,028 |
03-22-2024, 01:34 AM Last Post: stevew168 |
|
Switching from Dreamstation 1 to AirSense II autoset | jed3 | 2 | 215 |
03-21-2024, 07:39 AM Last Post: jed3 |