Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account

New Posts   Today's Posts

Amara View ffm with Resmed ClimateLine heated hose?
My wife (me too) just got an Amara View ffm that so far she thinks is the best thing since sliced bread (me too). The problem is that she would like to use it with her Resmed ClimateLine heated hose - she has a Resmed S9 BIPAP - and the Amara short hose end is too small for the opening on the Resmed hose.
I checked with online suppliers with no luck finding an adapter. Also just emailed Respironics but no answer yet - I doubt if they will supply an adapter for a competitors hose but thought I would try anyway.
Googled it with no results. Has anyone found a solution for this?

If all else fails I think I can jury-rig a solution by using some self amalgamating silicon tape to seal the Amara short hose end in the ClimateLine hose opening but it would be nice to have a better solution.

ClimateLine hose end ID =.903 in/22.94 mm
Amara short hose end OD = .874 in/22.2mm ID = .756 in/ 19.22 mm
Post Reply Post Reply
I use the Amara View with the ClimateLine hose with my A10. It fits perfectly.

I wonder what the difference is?
Sleep is worth the effort.
Post Reply Post Reply
I have attached a picture of the Amara View hose. It has a swivel adapter attached to the end of the white hose that fits into the ClimateLine hose.


I guess my photo is not too clear. Clicking it for an enlarged view is helpful.

Sleep is worth the effort.
Post Reply Post Reply

as replied to on another forum, *all* cpap masks/hoses have a nominal 22mm connection size, there are no adapters available or needed.

the end of your wife's climateline hose has gotten soft and lost some of it's grip.

some people will tell you to throw it away and get a new one. I'm not one of those people.

connect the mask and hose, then wrap a rubber band around the end, or some stretchy (silicone) tape, or do what I did with one of my regular hoses which had an end that got soft after a couple years of use, I wrapped thread around the end tightly, it gave the end grip again, and I used the hose for a couple more years until I replaced it with a longer one. (waste not want not, etc)
Post Reply Post Reply
It appears that the climate line hose end has been stretched some by the mask adapter that has been in it for a year or so. I tried the short hose in an older heated climate line hose that hasn't been used much because it did not have a oxygen hose connection feature and it fit pretty snugly.
Post Reply Post Reply
Hi Clay L,
I tried the Amara View for a few days with my ClimateLine hose and didn’t have any trouble with getting that mask to fit into it.
Good luck to you with getting this problem straightened out.
Post Reply Post Reply

Okay - wrapped a rubber band around the fitting and the climate line hose short hose fits tightly. Smile
Thanks everyone.
Post Reply Post Reply

Possibly Related Threads...
Thread Author Replies Views Last Post
  Amara view leaking bad Kryogen 25 713 11-11-2017, 10:23 AM
Last Post: Kryogen
  Air Mini Hose noise solution Frequenttraveler 18 1,926 11-07-2017, 11:57 PM
Last Post: donmeek
  12mm hose on Dreamstation ghstudio 5 290 11-07-2017, 12:11 AM
Last Post: David Govan
  DIY Amara View Mask Leak Fix jrdnduvall 8 232 11-06-2017, 08:58 PM
Last Post: jrdnduvall
  Respironics Amara View FFM vs Resmed F20 Airtouch st8800 4 172 11-01-2017, 09:18 PM
Last Post: st8800
Question [Symptoms] The tip of my nose is sensitive using the Amara View mask Rousseau21 23 4,782 10-30-2017, 07:09 AM
Last Post: brenda1967
Question Users of Xylimelts and Amara View FFM CTcentrals 0 125 10-28-2017, 09:17 PM
Last Post: CTcentrals

Forum Jump:

New Posts   Today's Posts

About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.

For any more information, please use our contact form.