Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Smart Card & Software for the old Respironics Remstar Auto M-Series ??
#1
Smart Card & Software for the old Respironics Remstar Auto M-Series ??
.I'm giving my Respironics Remstar Auto M-series to my son as a backup. (I now have two Airsense 10 machines for my own APAP & backup).

Right now he has the cheapest "bare bones" ResMed constant-pressure CPAP that the DME pawned off on him. But, fortunately he does well on it. But he said he wanted a backup.

I understand that my old M-Series came out in 2008-2009 before Phillips joined Respironics . . . and the machine is NOT one of the recalled machines.

My questions: This old Remstar M-Series uses a large (c. 2" x 3.25") Encorepro smart card which I believe has been discontinued.
1) I forget what was it actually used for? Input to the provider only??
2) Will the machine run WITHOUT the card, and still show the AHI, etc on the display?
3) Will ANY software work with the machine now . . . and are needed (?) replacement smart cards still sold, and the larger card readers?

Thanks in advance for any input.

JoyD.
Post Reply Post Reply
#2
RE: Smart Card & Software for the old Respironics Remstar Auto M-Series ??
The Philips Respironics Encore Pro smartcard is discontinued, but can be found on Ebay and other places by searching. It requires a smartcard reader to read and import the data to a computer using EncorePro software, which is available on the forum for free. It's very old technology and not very user-friendly. The machine will run just fine without it and can display simple therapy information on the small LCD display.

You can request a Clinician Setup Manual for the Respironics M-Series CPAP at the Setup Manuals link at the top of this page. That gives instructions on changing settings and accessing therapy data. I personally would not put much effort into getting a Smartcard or Reader for this very old machine. You can often find good deals on lightly used machines on the Facebook Marketplace, Craigslist, and other person to person sales platforms. I assume he has no insurance?
Sleeprider
Apnea Board Moderator
www.ApneaBoard.com

____________________________________________
Download OSCAR Software
Soft Cervical Collar
Optimizing Therapy
Organize your OSCAR Charts
Attaching Files
Mask Primer
How To Deal With Equipment Supplier


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#3
RE: Smart Card & Software for the old Respironics Remstar Auto M-Series ??
(02-24-2023, 10:22 AM)Sleeprider Wrote: The machine will run just fine without it and can display simple therapy information on the small LCD display.

You can request a Clinician Setup Manual for the Respironics M-Series CPAP at the Setup Manuals link at the top of this page. That gives instructions on changing settings and accessing therapy data. I personally would not put much effort into getting a Smartcard or Reader for this very old machine.

Thanks for your input, SleepRider. I've already accessed both the USER MANUAL & the CLINICIAN's SET UP MANUAL for him to use it as a BACKUP . . . and changed the pressure/ramp settings in line with his current ResMed machine (while he was watching).

Of course you're right about forgetting about a smartcard & reader, and merely using the display which shows the 7-day AHI average. That's more than he has now with the ResMed "brick" constant pressure CPAP that the DME pushed on him when he didn't know any better. Fortunately, he has done very well with it: no problems adjusting and always feels great when he wakes up.

Next time he buys a machine . . . he knows to have the MD specify a top-of-the-line ResMed (yes, he has insurance).

Thanks again,
Joy
Post Reply Post Reply
#4
RE: Smart Card & Software for the old Respironics Remstar Auto M-Series ??
You are correct the the display can only be changed to show a 7 Day or 30-day average.
He must surely be due to have a new machine. The M-series is simply ancient.

If you want to chase down the Mako Infineer DT-3500 Smartcard Reader, USB Driver and a Smartcard, let me know. I have not dealt with this subject in 6 years, and this is the post I made at that time:

(08-20-2017, 08:51 AM)Sleeprider Wrote: The only card reader I ever used was a Mako DT-3500 smart card reader.  If you can find the card reader, it should be able to read data from the Smartcard on your BiPAP.   I have not looked for a long time, but might have the driver files on a computer somewhere, however you need the hardware to even get started. If you can read the Smartcard, it will import to EncorePro2 which itself is a PITA. May I suggest a new machine?  Sellers on Amazon have been listing the Dreamstation DSX700T11 at very good prices.
Sleeprider
Apnea Board Moderator
www.ApneaBoard.com

____________________________________________
Download OSCAR Software
Soft Cervical Collar
Optimizing Therapy
Organize your OSCAR Charts
Attaching Files
Mask Primer
How To Deal With Equipment Supplier


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#5
RE: Smart Card & Software for the old Respironics Remstar Auto M-Series ??
(02-24-2023, 11:54 AM)Sleeprider Wrote: He must surely be due to have a new machine. The M-series is simply ancient.

As I read the posts, the M-series is being used as a backup.

He has a current ResMed machine, that was just acquired. So insurance won't buy another yet.
I'm guessing the Air Sense 10 or 11 CPAP that doesn't record detailed data (need the Elite or higher for that).
Post Reply Post Reply
#6
RE: Smart Card & Software for the old Respironics Remstar Auto M-Series ??
I forgot that a no-data CPAP even exists.
Sleeprider
Apnea Board Moderator
www.ApneaBoard.com

____________________________________________
Download OSCAR Software
Soft Cervical Collar
Optimizing Therapy
Organize your OSCAR Charts
Attaching Files
Mask Primer
How To Deal With Equipment Supplier


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#7
RE: Smart Card & Software for the old Respironics Remstar Auto M-Series ??
I think I have seen some detailed data from the AS11 CPAP model. I'd have to check later.
Apnea Board Monitors are members who help oversee the smooth functioning of the Board. They are also members of the Advisory Committee which helps shape Apnea Board's rules & policies. Membership in the Advisory Members group does not imply medical expertise or qualification for advising Sleep Apnea patients concerning their treatment.
Post Reply Post Reply
#8
RE: Smart Card & Software for the old Respironics Remstar Auto M-Series ??
Actually my son has a 10 year old ResMed for his own machine. I gave him my old Respironics M-Series as a back-up which he uses when he stays overnight at his partner's home, and says it works just fine. -- I offered to buy him an AirSense 10 AutoSet which I could buy through friends for $499, but he turned it down. Says he's doing just fine, and doesn't need software which he wouldn't use anyway.. Well, that's his choice . . . I tried! :-)

Thanks for all attempts to help. He's on his own now!
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  problem downloading OSCAR SOFTWARE Bailey104 1 88 03-15-2024, 05:49 PM
Last Post: Crimson Nape
  NOTICE: ResScan 7.1 Software now available [for ResMed machines only] SuperSleeper 0 434 02-26-2024, 10:27 PM
Last Post: SuperSleeper
  Software support for the Astral 150? Peashee888 10 623 02-18-2024, 10:34 AM
Last Post: LoudSnorer
  Software/app for Lowenstein Prisma SmartPlus w/o NHS knowing Ploppy 3 1,010 12-21-2023, 10:01 AM
Last Post: Ploppy
  PC Software RchiAiki 13 1,195 12-20-2023, 11:51 PM
Last Post: Crimson Nape
  Need urgent Software for Yuwell YH-580 WilliamVasquez 12 4,104 12-19-2023, 01:08 AM
Last Post: VankoGo
  Software to read edf file from in lab study? lisaistired 3 687 12-02-2023, 01:26 AM
Last Post: Gideon


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.