Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Archived SleepyHead Discussions [Q&A Thread from Jun-2014 thru Aug 2015]
I just logged my first night with RM AutoSense A10 For Her (I know, I know) after 2 nights with RM AutoSense A10 Auto Set. I was expecting more data to SH when I used the FH unit as I understood it had more reporting data. That did not appear to be the case this morning when I Xferred to SH.

After rechecking the clinical settings I noted that it was in AutoSet mode rather AutoSet For Her. I corrected that and I'm hoping I will be able to see RERA's etc tomorrow morning as that was an area of major concern to me. I had been monitoring that up until Wednesday on my PR60.

Is anyone aware of the SH ability to gather this in formation from the "Her" model?
“Life is hard; it's harder if you're stupid.”
"Duke" Wayne
(11-22-2014, 12:47 PM)jctampa Wrote: Is anyone aware of the SH ability to gather this in formation from the "Her" model?

It sure does!!

I have the same machine.

To all, to each, a fair good-night,
And pleasing dreams, and slumbers light.
Scott—Marmion. L’Envoy. To the Reader.

Diagnosed with OSA September 2014
AHI=18
Lowest SpO2: 79%
(11-22-2014, 01:18 PM)Lambsydoats Wrote:
(11-22-2014, 12:47 PM)jctampa Wrote: Is anyone aware of the SH ability to gather this in formation from the "Her" model?

It sure does!!

I have the same machine.

I just reviewed this mornings SH report and it still does NOT show a listing for RERA on any section of the "Daily" screen. On the "Statistics" report there is still a RERA line but no data.

On the machine clinical screens I see nothing about RERA.

I confirmed that it is set to AutoSet For Her.

Are you getting DATA on RERA? I can't believe I sent from significant events as shown on the PR60 to none on the RMA-10. Of course when I consider that on the two new RMA-10's I have AHI less than 1.0 vs averages of high 3's to high 4's (peaks over 5) with constant numerous RERA events maybe the PRS60 was not functioning properly.


(11-23-2014, 07:30 AM)jctampa Wrote: Are you getting DATA on RERA?

jctampa:

I am. Here's a screenshot of one day with RERA recorded. Note the listing on the left and the spike in the graph labeled RE.

Lamb
To all, to each, a fair good-night,
And pleasing dreams, and slumbers light.
Scott—Marmion. L’Envoy. To the Reader.

Diagnosed with OSA September 2014
AHI=18
Lowest SpO2: 79%
Wow, my machine must be the culprit, I don't get at least two of the items your screen shot shows. I've looked at my machine and don't see any settings I've missed and both SH and ResScan don't show those items.

Maybe someone can help me find the missing link with my RM A10 FH.
(11-23-2014, 06:23 PM)jctampa Wrote: Wow, my machine must be the culprit, I don't get at least two of the items your screen shot shows. I've looked at my machine and don't see any settings I've missed and both SH and ResScan don't show those items.

Maybe someone can help me find the missing link with my RM A10 FH.

In SH, go to FILE then PREFERENCES then EVENTS and see what you have checked in the OVERVIEW column.

Lamb
To all, to each, a fair good-night,
And pleasing dreams, and slumbers light.
Scott—Marmion. L’Envoy. To the Reader.

Diagnosed with OSA September 2014
AHI=18
Lowest SpO2: 79%


All that is done. All of the data showed before I switched to the RM machine but I still double checked those settings when those items didn't show up with the RM download. I also don't get that data with the ResScan software I downloaded a little while ago.
Also in preferences, under the IMPORT tab, is "Pre-load all summary data at start-up" checked?
To all, to each, a fair good-night,
And pleasing dreams, and slumbers light.
Scott—Marmion. L’Envoy. To the Reader.

Diagnosed with OSA September 2014
AHI=18
Lowest SpO2: 79%
Apologies for grunching.

I was diagnosed a while ago with sleep apnea, and recently took the plunge to become a hose-head - 3 nights in and adjusting.

I'm not a QT dev, but have contributed to other open source projects.

Is there an IRC channel, issue tracker etc for the project for those what would like to contribute?


(11-23-2014, 07:35 PM)Lambsydoats Wrote: Also in preferences, under the IMPORT tab, is "Pre-load all summary data at start-up" checked?

Lambsy,
Could you please post a shot of that same page but with the Details screen showing the color coded bars of what events appear on the the event flags screen?

I finally got the details to show up in ResScan but prefer to use SH if at all possible.

Thanks,
"JC"
“Life is hard; it's harder if you're stupid.”
"Duke" Wayne


Possibly Related Threads...
Thread Author Replies Views Last Post
Arrow ResScan CPAP Reporting Software (current version: 5.5) [Archived Discussions] SuperSleeper 1,109 498,899 08-25-2015, 07:10 PM
Last Post: SuperSleeper
Idea Updates to SleepyHead [May 2015] SuperSleeper 21 3,620 06-26-2015, 04:45 PM
Last Post: Mark Douglas
Arrow EncoreBasic 2.4.8.0 CPAP Reporting Software [Archived read-only thread] EncoreBasic User 142 56,635 02-18-2015, 11:29 AM
Last Post: on the virge
Information Archived SleepyHead Discussions [Q&A Thread from Sep-2011 thru May 2014] SuperSleeper 484 174,772 05-28-2014, 12:23 PM
Last Post: SuperSleeper

Forum Jump:

New Posts   Today's Posts




About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.

For any more information, please use our contact form.