Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Archived SH Discussions [Q&A Thread from Jun-2014 thru Aug 2015]
RE: SleepyHead Software - Beginner's Guide, Questions, Answers & Discussion
(04-16-2015, 01:00 PM)eseedhouse Wrote:
(04-16-2015, 12:48 PM)LanceC Wrote: I wonder if keeping the whole folder in Dropbox and just having shortcuts on each PC would resolve it.

Sounds reasonable, I'll likely give it a try.

When you turn your second computer on, do you give it enough time to let Dropbox finish updating? If not, that might be why you don't see the newest data on the second computer.

When you import data on the first computer, Dropbox will see new files and will upload them to the Dropbox servers. When the upload is complete, your other computer(s) running Dropbox will see the new files and start to download them. The speed of this process depends on the speed of your internet connection.
RE: SleepyHead Software - Beginner's Guide, Questions, Answers & Discussion
Also, make sure Settings -> Preferences -> Bandwidth -> Enable LAN Sync is checked. That way you cut out the middle-man and sync faster.
This space for rent.
RE: SleepyHead Software - Beginner's Guide, Questions, Answers & Discussion
(04-16-2015, 02:13 PM)Quila Wrote: When you turn your second computer on, do you give it enough time to let Dropbox finish updating? If not, that might be why you don't see the newest data on the second computer.

But it's not. I was working in I.T. for 25 years. I know enough to wait until the synch is finished.

But there is a problem - let's say I put both the programs and the data files into dropbox. Then I set the program to point to the data using one computer. That path won't be right on the other computer since the dropbox directory is not in the same path on both computers. But since there is only one copy of Sleepyhead and it's in the dropbox, it's path information will be the same when run from either computer, and that won't work.


Ed Seedhouse
VA7SDH

Part cow since February 2018.

Trust your mind less and your brain more.


RE: SleepyHead Software - Beginner's Guide, Questions, Answers & Discussion
(04-16-2015, 03:07 PM)eseedhouse Wrote:
(04-16-2015, 02:13 PM)Quila Wrote: When you turn your second computer on, do you give it enough time to let Dropbox finish updating? If not, that might be why you don't see the newest data on the second computer.

But it's not. I was working in I.T. for 25 years. I know enough to wait until the synch is finished.

But there is a problem - let's say I put both the programs and the data files into dropbox. Then I set the program to point to the data using one computer. That path won't be right on the other computer since the dropbox directory is not in the same path on both computers. But since there is only one copy of Sleepyhead and it's in the dropbox, it's path information will be the same when run from either computer, and that won't work.
Isn't the default path in the SH folder structure? If so, then setting the path relative to the SH root should work for either PC.
This space for rent.
RE: SleepyHead Software - Beginner's Guide, Questions, Answers & Discussion
(04-16-2015, 03:10 PM)LanceC Wrote: Isn't the default path in the SH folder structure? If so, then setting the path relative to the SH root should work for either PC.

No, I moved it into Google Drive, actually. I can move it to the dropbox now that I have that as well as gdrive. I don't think a clean install puts that drive into the SH file structure, it puts it into the documents folder of the user account if I recall right. Where did it put yours?
Ed Seedhouse
VA7SDH

Part cow since February 2018.

Trust your mind less and your brain more.


RE: SleepyHead Software - Beginner's Guide, Questions, Answers & Discussion
(04-16-2015, 03:28 PM)eseedhouse Wrote:
(04-16-2015, 03:10 PM)LanceC Wrote: Isn't the default path in the SH folder structure? If so, then setting the path relative to the SH root should work for either PC.

No, I moved it into Google Drive, actually. I can move it to the dropbox now that I have that as well as gdrive. I don't think a clean install puts that drive into the SH file structure, it puts it into the documents folder of the user account if I recall right. Where did it put yours?

I don't remember. I moved mine to a local network share so I could access from several machines. Let me mess with it a little and see if I can figure something out.
This space for rent.
RE: SleepyHead Software - Beginner's Guide, Questions, Answers & Discussion
(04-16-2015, 03:07 PM)eseedhouse Wrote: But it's not. I was working in I.T. for 25 years. I know enough to wait until the synch is finished.

But there is a problem - let's say I put both the programs and the data files into dropbox. Then I set the program to point to the data using one computer. That path won't be right on the other computer since the dropbox directory is not in the same path on both computers. But since there is only one copy of Sleepyhead and it's in the dropbox, it's path information will be the same when run from either computer, and that won't work.

It looks like SleepyHead stores the location of the data folder in the registry, specifically HKCU\Software\Jedimark\SleepyHead-Testing\Settings\AppRoot. The data directory itself doesn't seem to have any absolute reference to a directory other than the directory that the SD card data is read from during import.

As long as that registry entry points to the correct data directory location on each computer, which will be different if Dropbox files are stored in different locations, I think it should work. Of course, I could be wrong.

This is all assuming you're using Windows.
RE: SleepyHead Software - Beginner's Guide, Questions, Answers & Discussion
(04-16-2015, 04:21 PM)Quila Wrote:
(04-16-2015, 03:07 PM)eseedhouse Wrote: But it's not. I was working in I.T. for 25 years. I know enough to wait until the synch is finished.

But there is a problem - let's say I put both the programs and the data files into dropbox. Then I set the program to point to the data using one computer. That path won't be right on the other computer since the dropbox directory is not in the same path on both computers. But since there is only one copy of Sleepyhead and it's in the dropbox, it's path information will be the same when run from either computer, and that won't work.

It looks like SleepyHead stores the location of the data folder in the registry, specifically HKCU\Software\Jedimark\SleepyHead-Testing\Settings\AppRoot. The data directory itself doesn't seem to have any absolute reference to a directory other than the directory that the SD card data is read from during import.

As long as that registry entry points to the correct data directory location on each computer, which will be different if Dropbox files are stored in different locations, I think it should work. Of course, I could be wrong.

This is all assuming you're using Windows.

I created a folder named "Data" in the SH folder and then edited the registry to point to .\Data and it seemed to work.
This space for rent.
RE: SleepyHead Software - Beginner's Guide, Questions, Answers & Discussion
(04-16-2015, 06:06 AM)Terry Wrote:
(04-15-2015, 11:15 PM)SleepingDragon Wrote: Tried to post a bug report at sourceforge; however it wouldn't let me.

So, my next best option I think is here Dont-know

+ Every so often, if start with the "Daily" tab and switch to the "Overview" tab the graphs in the overview will appear to be full of snow/static... think of the old TV when the signal goes out. I can go back to the "Daily" tab without issue.

There is a "broken-gl" version of sleepyhead that contains a work-around for graphics problems with some versions of the windows graphics drivers (I believe)

It would be worth a try.
Yep, saw that one in the folder; however, thought I'd give the opengl a try first. Works for my Quake Games Grin
I think I'll switch over to the broken GL version, ran both.. didn't notice much difference other than the lack of snow Rolleyes
RE: SleepyHead Software - Beginner's Guide, Questions, Answers & Discussion
(04-16-2015, 03:07 PM)eseedhouse Wrote: But there is a problem - let's say I put both the programs and the data files into dropbox. Then I set the program to point to the data using one computer. That path won't be right on the other computer since the dropbox directory is not in the same path on both computers. But since there is only one copy of Sleepyhead and it's in the dropbox, it's path information will be the same when run from either computer, and that won't work.

Turns out to be a non problem since the data directory is stored in the local computer's registry, which is what the program reads on start up.
So the same .exe can read the data stored in different locations on each computer. This is about the first time I've actually found the registry doing something useful.Unsure
Ed Seedhouse
VA7SDH

Part cow since February 2018.

Trust your mind less and your brain more.




Possibly Related Threads...
Thread Author Replies Views Last Post
  Another OSCAR cannot find data thread - with a twist. Cuppa 63 3,992 03-02-2023, 04:30 AM
Last Post: Cuppa
  OSCAR v1.3.0 is released [old archived thread] Gideon 36 7,517 02-07-2023, 06:58 PM
Last Post: SuperSleeper
  Looking for DreamStation 2 samples using 12mm heated tube [thread closed] sawinglogz 6 1,205 01-14-2022, 04:43 PM
Last Post: SuperSleeper
Arrow ResScan CPAP Reporting Software (OLD version: 5.5) [Archived Discussions] SuperSleeper 1,109 1,649,170 08-25-2015, 07:10 PM
Last Post: SuperSleeper
  New ResScan Version 5.4.1 - updated June 19, 2015 [old version] SuperSleeper 3 9,319 07-21-2015, 03:58 PM
Last Post: spursfan1965
Idea Updates to SleepyHead [May 2015] SuperSleeper 21 7,364 06-26-2015, 04:45 PM
Last Post: Mark Douglas
Arrow EncoreBasic 2.4.8.0 CPAP Reporting Software [Archived read-only thread] EncoreBasic User 142 88,591 02-18-2015, 11:29 AM
Last Post: on the virge


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.