Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Archived SleepyHead Discussions [Q&A Thread from Sep-2011 thru May 2014]
(05-11-2013, 05:53 AM)alpha Wrote: My husband has a Fisher & Paykel SleepStyle HC254, a week old now.
There is some support for F&P Icon but not for other F&P machines
Not sure if you need InfoSmart for SleepStyle series

I just got the Icon, and i am unclear. does Sleepyhead work for the Icon on Windows XP? I appear to be running version 0.9.2
OK...

I downloaded the patched software, and was able to read the USB stick from the Icon.

It read the data, but when I tried to purge data from one day (today, as I was playing with a new set of nasal pillows) it crashed. It also would not let me purge data for all days, crashing again.

I am running windows XP.


Hi djharkavy and welcome
I don,t use the software or the Icon. The patch is for PRS1 60 series machine

http://sourceforge.net/apps/mediawiki/sl...d_Hardware
Supported Hardware
Fisher & Paykel
File:F&PIcon.png
Basic support has been added to SleepyHead GIT source.. it still needs testing.
Flow waveform still needs decoding.

(05-14-2013, 09:44 PM)djharkavy Wrote: I downloaded the patched software, and was able to read the USB stick from the Icon.

Yep, as Zonk said the patched .exe. file is only for Series 60 Philips-Respironics machines. Not for the ICON machines.

You'll need to completely uninstall SleepyHead, and reinstall, but this time, don't replace the .exe file with the Series 60 patched .exe.

Good luck.

Coffee
SuperSleeper
Apnea Board Administrator
www.ApneaBoard.com


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.



New to this. Hope this is correct. I have a new Fisher and Paykel machine and work with Macs. Will sleepy head read my data?
regards, Gary


(05-19-2013, 07:43 PM)Gary Batey Wrote: New to this. Hope this is correct. I have a new Fisher and Paykel machine and work with Macs. Will sleepy head read my data?
regards, Gary
Hi Gary and welcome to the forum
See post #374 for machines supports



I tried downloading "Sleepyhead" to my win 7 Home Premium, 64-bit HP laptop. I see the file is for a 32-bit machine. Does that mean it won't run on my 64-bit? It won't run so I'm assuming the 32/64 is the problem. Correct?

I tried running ResScan also and it "runs" but won't read my SD card. Is that a 64-bit issue or a driver issue? I did not install drivers per your instruction.

And finally, I have a REMstar Pro C-Flex+. Are either of these programs compatible with my PAP machine? I don't recognize any machine names on your compatibility list as being mine.

I'm new to this apnea game and am not familiar with some of the jargon. Peter
(05-21-2013, 02:55 PM)grampypeter Wrote: I tried running ResScan also and it "runs" but won't read my SD card. Is that a 64-bit issue or a driver issue? I did not install drivers per your instruction.
Hi Peter and welcome
ResScan for ResMed machines and don,t support your machine

Remove water tank to avoid any damage and look for the label at the underside of the machine
If the model number 460 (US) 461 (Canada) than you need to install the patch too




(05-21-2013, 04:38 PM)zonk Wrote:
(05-21-2013, 02:55 PM)grampypeter Wrote: I tried running ResScan also and it "runs" but won't read my SD card. Is that a 64-bit issue or a driver issue? I did not install drivers per your instruction.
Hi Peter and welcome
ResScan for ResMed machines and don,t support your machine

Remove water tank to avoid any damage and look for the label at the underside of the machine
If the model number 460 (US) 461 (Canada) than you need to install the patch too

Thank you Zonk for prompt reply.
I did not realize there was a patch for SleepyHead. Installed it and now good to go.
Works fine. Now got to learn what it all means. Thanks Peter



Possibly Related Threads...
Thread Author Replies Views Last Post
Arrow ResScan CPAP Reporting Software (current version: 5.5) [Archived Discussions] SuperSleeper 1,109 511,127 08-25-2015, 07:10 PM
Last Post: SuperSleeper
Information Archived SleepyHead Discussions [Q&A Thread from Jun-2014 thru Aug 2015] SuperSleeper 542 118,374 08-21-2015, 01:27 PM
Last Post: SuperSleeper
Arrow EncoreBasic 2.4.8.0 CPAP Reporting Software [Archived read-only thread] EncoreBasic User 142 59,063 02-18-2015, 11:29 AM
Last Post: on the virge

Forum Jump:

New Posts   Today's Posts




About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.

For any more information, please use our contact form.