Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Archived SleepyHead Discussions [Q&A Thread from Sep-2011 thru May 2014]
I am +30 days into using a Respironics REMstar Auto, DOM (REF 560P). At least, that's all the numbers on the label.

Is SH compatible with this system? If not, what options are available. The Encore Viewer?

I am a "wanna-be" programmer having hacked some apps over the years. Like writing a good book, it would be immensely satisfying to write software that produce real-tactile benefit to peoples lives. In this sense, I am envious of JediMarks creation!

Also, this is the 1st Sleep Apnea forum I've been on. It's great to read others experiences. Personally I still have negative feelings towards the necessity to use this device. But getting your but kicked daily is quite effective at whittling down one's pride...
(09-21-2013, 03:20 PM)PHTman Wrote: I am +30 days into using a Respironics REMstar Auto, DOM (REF 560P). At least, that's all the numbers on the label.

Is SH compatible with this system? If not, what options are available. The Encore Viewer?

I am a "wanna-be" programmer having hacked some apps over the years. Like writing a good book, it would be immensely satisfying to write software that produce real-tactile benefit to peoples lives. In this sense, I am envious of JediMarks creation!

Also, this is the 1st Sleep Apnea forum I've been on. It's great to read others experiences. Personally I still have negative feelings towards the necessity to use this device. But getting your but kicked daily is quite effective at whittling down one's pride...

Never mind.... I go the SH software to work. I orginally installed in a VMWare session and pointed to a folder for the data which SH failed to recognize.

After reading other threads I decided to install to the host system and it recognized the data source correctly.
(09-21-2013, 03:20 PM)PHTman Wrote: Also, this is the 1st Sleep Apnea forum I've been on. It's great to read others experiences.

Hi PHTman, welcome to the forum!

Glad you found a solution.

Take care,
--- Vaughn
Membership in the Advisory Member group should not be understood as in any way implying medical expertise or qualification for advising Sleep Apnea patients concerning their treatment. The Advisory Member group provides advice and suggestions to Apnea Board administrators and staff on matters concerning Apnea Board operation and administrative policies - not on matters concerning treatment for Sleep Apnea. I think it is now too late to change the name of the group but I think Voting Member group would perhaps have been a more descriptive name for the group.


I am wondering if you could help. I have a Philips System One Remstar Pro. I installed the SleepyHead software for Mac. When I try to import data all that shows on the screen is the machine information and says that no cpap machine data imported. Can you help?
(10-03-2013, 11:47 PM)LarryT Wrote: I am wondering if you could help. I have a Philips System One Remstar Pro. I installed the SleepyHead software for Mac. When I try to import data all that shows on the screen is the machine information and says that no cpap machine data imported. Can you help?
Hi Larry
If your machine PRS1 Pro 460 (60 series), you need to install the patch but its not required with the updated version
Here is the link http://www.apneaboard.com/forums/Thread-...structions
Thank you! That is the problem. I will get the patch.


Isn't there a new version that doesn't require the patch?
Sleepster
Apnea Board Moderator
www.ApneaBoard.com


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
(10-05-2013, 10:48 AM)Sleepster Wrote: Isn't there a new version that doesn't require the patch?

Yes and no Sleepster. There is a version 0.9.3 for Windows that does not require the patch mentioned earlier.

If you are using a Mac or Linux, you still need the patch for a 60 Series machine.
INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
(10-06-2013, 07:47 PM)cbramsey Wrote:
(10-05-2013, 10:48 AM)Sleepster Wrote: Isn't there a new version that doesn't require the patch?

Yes and no Sleepster. There is a version 0.9.3 for Windows that does not require the patch mentioned earlier.
If you are using a Mac or Linux, you still need the patch for a 60 Series machine.

There is no "patch" for Linux; you just install the latest version from the source. Paptillian posted the instructions a while back.


Wow. I just installed the software. Looks better organised and feels a lot lighter and faster than ResScan. I'm still exploring, but I wanted to post my first impression.


Possibly Related Threads...
Thread Author Replies Views Last Post
Arrow ResScan CPAP Reporting Software (OLD version: 5.5) [Archived Discussions] SuperSleeper 1,109 528,921 08-25-2015, 07:10 PM
Last Post: SuperSleeper
Information Archived SleepyHead Discussions [Q&A Thread from Jun-2014 thru Aug 2015] SuperSleeper 542 120,765 08-21-2015, 01:27 PM
Last Post: SuperSleeper
Arrow ResScan backtracked to Version 5.3 - [thread closed - new version is 5.4.1] SuperSleeper 9 2,940 06-19-2015, 04:33 AM
Last Post: zonk
  ResScan - New 5.4 version - [thread closed, this is old version] SuperSleeper 1 4,404 06-19-2015, 03:51 AM
Last Post: roadrunner230
Arrow EncoreBasic 2.4.8.0 CPAP Reporting Software [Archived read-only thread] EncoreBasic User 142 62,011 02-18-2015, 11:29 AM
Last Post: on the virge
  ResScan SW thread 2 -- runs on 64 bit OS? justMongo 6 1,752 05-18-2014, 11:07 PM
Last Post: herbm

Forum Jump:

New Posts   Today's Posts




About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.

For any more information, please use our contact form.