Post Reply 
Bluetooth Module for PR System One
Author Message
marc31 Offline

Preferred Members

Posts: 26
Joined: Jul 2016

Machine: System One
Mask Type: Nasal pillows
Mask Make & Model: Swift FX Bella
Humidifier: Respironics
CPAP Pressure: 8
CPAP Software: SleepyHead EncoreBasic

Other Comments:

Sex: Male
Location: san diego

Post: #1
Bluetooth Module for PR System One
I'm considering the Bluetooth Module for my System One CPAP. I currently use the Encore Software on my desktop PC to track my progress, however removing the SD Card each time is cumbersome and wondered if I could use the Bluetooth in my PC to download the Data from the CPAP through the Module an into the PC, and then into the Encore program..... or is it exclusively for the Android App? And should it not, does the "SleepMapper" APP detail Waveforms also? I use that to track how many times I wake up at night and look for the "OFF" Cycles in the graph.
(This post was last modified: 07-12-2016 10:23 AM by marc31.)
07-12-2016 10:12 AM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
wocko1 Offline

Members

Posts: 12
Joined: Jul 2016

Machine: Philips Respironics Dreamstation Auto CPAP
Mask Type: Full face mask
Mask Make & Model: Fisher & Paykel SIMPLUS (Medium)
Humidifier: Dreamstation Humidifier
CPAP Pressure: 5-20 cmH2O
CPAP Software: SleepyHead

Other Comments:

Sex: Male
Location: Australia

Post: #2
RE: Bluetooth Module for PR System One
Don't bother with the Bluetooth module. Buy a Toshiba FlashAir W-02 or W-03 card, and use the FlashPAP software to transfer your data to your software. The card will never have to leave your machine. I am pretty sure the bluetooth module is for mobile phones, maybe until someone reverse engineers the protocol.

Have you tried using Sleepyhead for your CPAP data analysis?
(This post was last modified: 07-25-2016 02:02 AM by wocko1.)
07-25-2016 02:01 AM
Find all posts by this user Post Reply Quote this message in a reply
marc31 Offline

Preferred Members

Posts: 26
Joined: Jul 2016

Machine: System One
Mask Type: Nasal pillows
Mask Make & Model: Swift FX Bella
Humidifier: Respironics
CPAP Pressure: 8
CPAP Software: SleepyHead EncoreBasic

Other Comments:

Sex: Male
Location: san diego

Post: #3
RE: Bluetooth Module for PR System One
I am happy to report that I am successfully using FlashPAP (the author Kevin's help was invaluable to me getting it to work) and Sleepyhead. The Toshiba W-03 Card is amazing, but Kevin's program really utilizes it to it's potential.

It took me some time getting it to work as I made some errors since I had not used JAVA before. I have it installed in Windows 10, and ended up writing my own install instructions so when I need to re-install it, I won't need to re-learn how it works. If it has not worked for you, try the below... This is for Windows 10 (and 7?) which worked for me.. You may of course need to modify any/all of this to suit your installation. It's a guideline only..... Use FlashPAP's install instructions first.....

FlashPAP Install Instructions for Windows;

1) Download and Install Java SE
2) Download FLASHPAP
3) FLASHPAP arrives in a Zipped Folder. Once unzipped, a Folder is displayed called “FlashPAP”
4) In it are six files.
5) The “FlashPAP.jar file should display the “JAVA” icon on it showing it has linked with the JAVA program previously installed.
6) Right Click the FlashPAP.jar program and OPEN “Properties”….
7) Confirm that JAVA is the “OPENS WITH” Default. Change if necessary
8) Insure when opening the FlashPAP.jar file that it is using JAVA to open with. It may be incorrectly opening using either WINARAR or ZIP….. (You will know this is occurring when you see more than 6 files opening). Click on FlashPAP.jar, and then scroll to “Open With” and locate JAVA Platform SE Binary as the default “open with” program.
9) At the bottom of the Dialog Box, Tick the “Security” “UNBLOCK” Box
10) Click “Apply” then “OK” to close
11) In your “Documents“ Folder, Right Click in an empty area> New> Folder. Rename that Folder “FlashPAP CPAP”
12) Move the FlashPAP.jar program from the desktop and place it in it
13) Open the this new “FlashPAP CPAP” Folder, and Right Click the “FlashPAP.jar File> SEND TO> DESKTOP
14) On your desktop, Right Click this new “FlashPAP.jar Shortcut> Properties> Change ICON> Browse> Navigate to Original FlashPAP Downloaded Folder and click on “FlashPAP Icon.ico”
Double Click on it> APPLY> Okay
15) Click on the enclosed “FlashPAP.jar to Start the Program
16) For “Exit & Run Sleep Tracking Software” Locate the “Start” Shortcut by Right Clicking the “Sleepyhead” desktop Icon> Open File Location and pointing the Sleep Tracking Software to this Shortcut.
Example: C:\Users\YOUR NAME\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\SleepyHead

Install Cautions: Move the FlashPAP.jar folder into the FlashPAP CPAP Folder on your desktop or Documents Folders. Do not attempt to run the FlashPAP program from the original folder. You will likely encounter the “Write Operation Failed Error Message” otherwise.

When setting up the 1st Page of the FLASHPAP Setup Screen, use the “FlashAir Host name” instead of the ip address to insure recognition of data files.
07-25-2016 10:24 AM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Software for PR System One BiPAP autoSV Advanced jmayer180 17 478 11-24-2016 12:59 PM
Last Post: ruach
Information DreamMapper Connection Guide for SD Card, Bluetooth & Modem SuperSleeper 0 589 06-28-2016 10:49 AM
Last Post: SuperSleeper
  SleepyHead with Respironics System One 60 Series CPAP SideSleeper 14 2,181 12-23-2015 03:24 AM
Last Post: Ghost1958
  Still cannot read card data for Sleepyhead (PR System One REMstar 60 Series) Jenny 36 15,733 09-06-2012 08:45 PM
Last Post: PaulaO2

Forum Jump:

Who's Online (Complete List)