Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

CMS50F external oximeter probe on CMS50D+?
#1
Hi,

I found a youtube video that shows an external oximeter probe attached to a CMS50D+.
I wonder if anyone have tried to use a CMS50F probe on a CMS50D+ and if it works?

Thanks!

Br,
rost
Post Reply Post Reply
#2
I don't have a D+, but I took a careful look at my F. It has five contacts on each side of the tab inside the connector in the the meter, and five on each side of the slot in the connector on the finger probe. If the D+ has five on each side it may be able to use the remote probe, but I'm not sure how you might wear the two pieces.

Good luck
Post Reply Post Reply
#3
Thank you pholynyk.
It is a micro-USB connection, so the connection should be OK.
I just hope the data streams are compatible.

I have just ordered a cheap one on ebay, so I guess i will know eventually Smile
Post Reply Post Reply


#4
The remote finger probe on my CMS-50F uses a mini-USB connector - I forgot to mention that. If the D+ us a micro-USB, it definitely won't work.
The mini-USB is 3mm thick - about an eighth of an inch. The micro-USB is 2mm thick - just over a sixteenth.
Or look at the pictures in Wikipedia to be sure.
Post Reply Post Reply
#5
I just assumed that the CMS-50F also had a micro-USB connection, but I was wrong.
That was really good information. Thank you again pholynyk!
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  [Equipment] CMS50F Pulse Oximeter c2workout 8 490 11 hours ago
Last Post: ThrownOutTheAsylum
  How to hook CMS50I oximeter's finger-puylse sensor to laptop USB 2SleepBetta 9 328 07-23-2017, 12:56 PM
Last Post: pholynyk
  Recording oximeter for overnight use BrassCat 5 468 07-22-2017, 01:27 PM
Last Post: ysundfw
Question Confusing Oximeter Results deeq92 8 235 06-17-2017, 01:43 AM
Last Post: quiescence at last
  What oximeter works with Sleepyhead? kderevan 8 318 06-11-2017, 08:26 PM
Last Post: sonicboom
  My oximeter CMS50I is very sensitive to hand movements, is yours the same ? djrem3000 2 139 06-07-2017, 02:56 PM
Last Post: ajack
  Is my oximeter's O2 sensor functioning as it should ? djrem3000 0 152 06-02-2017, 12:53 PM
Last Post: djrem3000

Forum Jump:

New Posts   Today's Posts




About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.

For any more information, please use our contact form.