Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

CMS50F
#1
CMS50F
I just received my CMS50F pulse ox meter. It seems to be working fine. I can't install the software due to a "data check redundancy check" error. I installed a version of the software I found online, but it doesn't "see" my device plugged into the computer. Any advice or suggestions for where I can find software that works?
Best regards,
Sandy

Practice random kindness and senseless acts of beauty.
Post Reply Post Reply
#2
RE: CMS50F
there is thread in the products review forum and also wiki
http://www.apneaboard.com/wiki/index.php...ter+&go=Go

SleepyHead supports CMS50 Oximeters
Post Reply Post Reply
#3
RE: CMS50F
http://www.apneaboard.com/wiki/index.php...2_software

Let us know if it still doesn't work
PaulaO

Take a deep breath and count to zen.




Post Reply Post Reply
#4
RE: CMS50F
I tried installing both software programs. Neither of them "see" the device. Now what?
Best regards,
Sandy

Practice random kindness and senseless acts of beauty.
Post Reply Post Reply
#5
RE: CMS50F
Is there data on the device?

Does it say 'downloading' or have any red text on the SpO2 Review software?
PaulaO

Take a deep breath and count to zen.




Post Reply Post Reply
#6
RE: CMS50F
Try a Different USB Port

I Had issues with My gps not working in one USB

but i changed usbs and away it went
Post Reply Post Reply
#7
RE: CMS50F
Gal,

There's been some discussion here about the cable supplied with some CMS units. It has a connector that is much bigger than it should be for just USB.

My personal experience, I got a CMS 50E and tried one of my other mini USB cables, no luck. I then tried the cable supplied with the unit and it worked, no problem. I then got the three other mini USB cables and devices I had (a couple garmins and a camera) and none of them would work with the CMS supplied cable and the CMS wouldn't work with any cable but the CMS supplied cable.

Others have said that this is bunk. Just thought it might be you're using a cable you already had and this might be an easy fix.

Best of luck!
Post Reply Post Reply
#8
RE: CMS50F
yep that was my problem was using a OEM cable that was not USB 2 compatible
Post Reply Post Reply
#9
RE: CMS50F
The CMS50D+ uses a cable that has some additional circuitry on it. Despite the "USB" style plug on the pulseox, it's not actual USB and needs the special cable.

In theory, none of the other CMS pulseoxen use a special cable, but try the original manufacturer's cables just in case.
Get the free OSCAR CPAP software here.
Useful links.
Click here for information on the main alternative to CPAP.
If it's midnight and a DME tells you it's dark outside, go and check it yourself.
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  CMS50I-CMS50F oximeters: technical and uploading differences and limits 2SleepBetta 16 3,465 11-19-2021, 02:30 AM
Last Post: Crimson Nape
  Experiences CMS50F Wrist Oximeter Sonno 13 1,705 05-13-2021, 04:40 PM
Last Post: Crimson Nape
  CMS50F DOA? cathyf 4 676 05-10-2021, 11:13 AM
Last Post: Ratchick
  Contec CMS50F time resolutions Phaul 1 710 01-31-2021, 03:30 PM
Last Post: Miati1
  [Equipment] CMS50F Pulse Oximeter c2workout 9 3,071 06-13-2020, 12:10 AM
Last Post: woozie38
  CMS50F OXIMETER LOADS BAD DATA AT START UP Michael Shaw 12 3,031 10-09-2018, 02:26 PM
Last Post: Michael Shaw
  Contec CMS50F oximeter accuracy - oxygen drops with one OA more then multiple OA MyronH 2 1,502 08-27-2018, 08:13 AM
Last Post: MyronH


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.