Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

[CPAP] AirSense 10 Autoset
#1

I just got my machine today and turned on the smartstart ... I tried it to see if it was working, but it didn't turn on after 5 breaths .... What could be wrong?

Thanks

Lorrie
Reply
#2
Hi lorrieb1965,
WELCOME! to the forum.!
I'm not sure why your smartstart isn't working, hang in there for answers to your question.
Much success to you with your CPAP therapy.
trish6hundred
Reply
#3
(08-30-2016, 02:20 PM)lorrieb1965 Wrote:
I just got my machine today and turned on the smartstart ... I tried it to see if it was working, but it didn't turn on after 5 breaths .... What could be wrong?

Thanks

Lorrie

Are you certain you have the cover for the humidifier closed completely? The reason I ask is - the same thing happened to me a while ago and it was because when I placed the humidifier into the right place, I neglected to shut the little door completely. Hope this helps you, if not I would call the place that you got your machine from and check with them. Good Luck to you.

Reply


#4
I use the SmartStart and find that sometimes I have to breathe in and out extra hard a couple times to start it.
Reply
#5
(08-31-2016, 06:50 AM)rem52 Wrote: I use the SmartStart and find that sometimes I have to breathe in and out extra hard a couple times to start it.

And I think it has something to do with the mask your using too.

When I used a nasal mask, it came on within a breath or two.

When I used ResMed P-10's it was within 1 breath

Using the Dreamwear I use now it can take up to 5 breaths to kick the machine in the butt to get it to go.

That's my story and I'm stickin' to it! [Image: gvJfYWn.gif]


---ICY
Warning: Eating chocolate may cause your clothes to shrink!
[Image: ry6XtE9.gif] <---- That's ME!
Reply
#6
There is a setting for mask type in the clinician setup menu. The manual should show you how to change it. The symptoms you describe indicate it is not set on the correct mask type Sleep-well


(08-30-2016, 02:20 PM)lorrieb1965 Wrote:
I just got my machine today and turned on the smartstart ... I tried it to see if it was working, but it didn't turn on after 5 breaths .... What could be wrong?
Thanks
Lorrie





(08-31-2016, 07:37 AM)icyura10 Wrote:
(08-31-2016, 06:50 AM)rem52 Wrote: I use the SmartStart and find that sometimes I have to breathe in and out extra hard a couple times to start it.
And I think it has something to do with the mask your using too.
When I used a nasal mask, it came on within a breath or two.
When I used ResMed P-10's it was within 1 breath
Using the Dreamwear I use now it can take up to 5 breaths to kick the machine in the butt to get it to go.

That's my story and I'm stickin' to it! [Image: gvJfYWn.gif]


---ICY

2004-Bon Jovi
it'll take more than a doctor to prescribe a remedy

Observations and recommendations communicated here are the perceptions of the writer and should not be misconstrued as medical advice.
Reply




Possibly Related Threads...
Thread Author Replies Views Last Post
  Airsense 10 Autoset - New User C0mbe 13 645 12-23-2016, 09:10 AM
Last Post: Sleeprider
  Cloggd Nose elling with ResMed Airsense 10 AutoSet edmund36 7 608 12-17-2016, 03:31 PM
Last Post: edmund36
  AirSense 10 For Her for a Guy ac110 3 460 12-12-2016, 07:41 PM
Last Post: Sleeprider
  airsense 10 autoset malfunction? sonicboom 53 11,054 12-11-2016, 09:38 AM
Last Post: trevvahhh
  Is this sound normal? - Resmed Airsense 10 Autoset Ronberta 8 1,754 11-29-2016, 07:59 PM
Last Post: sonicboom
  [Pressure] new airsense 10 new at this abrun7 7 685 11-19-2016, 02:12 PM
Last Post: Sleepster
  Resmed Airsense 10 CPAP data versus Resmed Airsense 10 Autoset data David P. 4 813 10-29-2016, 08:42 PM
Last Post: trish6hundred

Forum Jump:

New Posts   Today's Posts




About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.

For any more information, please use our contact form.