I just got my machine today and turned on the smartstart ... I tried it to see if it was working, but it didn't turn on after 5 breaths .... What could be wrong?
Lorrie
Hello Guest,
Welcome to Apnea Board !
[CPAP] AirSense 10 Autoset
|
08-30-2016, 02:20 PM
AirSense 10 Autoset
I just got my machine today and turned on the smartstart ... I tried it to see if it was working, but it didn't turn on after 5 breaths .... What could be wrong? Lorrie
08-30-2016, 02:55 PM
RE: AirSense 10 Autoset
Hi lorrieb1965,
WELCOME! to the forum.! I'm not sure why your smartstart isn't working, hang in there for answers to your question. Much success to you with your CPAP therapy.
trish6hundred
08-30-2016, 07:36 PM
RE: AirSense 10 Autoset
(08-30-2016, 02:20 PM)lorrieb1965 Wrote: Are you certain you have the cover for the humidifier closed completely? The reason I ask is - the same thing happened to me a while ago and it was because when I placed the humidifier into the right place, I neglected to shut the little door completely. Hope this helps you, if not I would call the place that you got your machine from and check with them. Good Luck to you.
08-31-2016, 06:50 AM
RE: AirSense 10 Autoset
I use the SmartStart and find that sometimes I have to breathe in and out extra hard a couple times to start it.
RE: AirSense 10 Autoset
(08-31-2016, 06:50 AM)rem52 Wrote: I use the SmartStart and find that sometimes I have to breathe in and out extra hard a couple times to start it. And I think it has something to do with the mask your using too. When I used a nasal mask, it came on within a breath or two. When I used ResMed P-10's it was within 1 breath Using the Dreamwear I use now it can take up to 5 breaths to kick the machine in the butt to get it to go. That's my story and I'm stickin' to it! ---ICY
08-31-2016, 08:25 AM
RE: AirSense 10 Autoset
There is a setting for mask type in the clinician setup menu. The manual should show you how to change it. The symptoms you describe indicate it is not set on the correct mask type
(08-30-2016, 02:20 PM)lorrieb1965 Wrote: (08-31-2016, 07:37 AM)icyura10 Wrote:(08-31-2016, 06:50 AM)rem52 Wrote: I use the SmartStart and find that sometimes I have to breathe in and out extra hard a couple times to start it.And I think it has something to do with the mask your using too.
2004-Bon Jovi
it'll take more than a doctor to prescribe a remedy Observations and recommendations communicated here are the perceptions of the writer and should not be misconstrued as medical advice. |
« Next Oldest | Next Newest »
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
Suggested Settings Switching AirSense 10 CPAP to AirSense 11 APAP | Rickyricardo | 3 | 170 |
04-20-2024, 04:55 PM Last Post: Rickyricardo |
|
N30i [what mask setting] Airsense 10 AutoSet | Topdogg7505 | 8 | 3,236 |
04-20-2024, 10:02 AM Last Post: ahfairley |
|
New CPAP User - Help Please - ResMed Airsense 11 Autoset | Pawpri | 53 | 1,571 |
04-18-2024, 05:25 PM Last Post: Pawpri |
|
Need help with Airsense 10 AutoSet | JonUK | 2 | 221 |
03-25-2024, 06:11 PM Last Post: JonUK |
|
[Equipment] Should I turn on the AB Filter option on my AirSense 10 AutoSet for these filters? | cLoo | 10 | 1,029 |
03-22-2024, 01:34 AM Last Post: stevew168 |
|
Switching from Dreamstation 1 to AirSense II autoset | jed3 | 2 | 217 |
03-21-2024, 07:39 AM Last Post: jed3 |
|
ResMed Airsense 10 AutoSet and Oscar | Bucktilley | 4 | 285 |
03-05-2024, 04:41 PM Last Post: Bucktilley |