Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

[CPAP] Beginning My Journey and a Big thank you
#61
OK ... I have saved 40 days of data on my SD card but the information makes NO sense, the AHI section is flat-lined, my daily sleep report sent from my machine to my laptop indicated apnea episodes every night, what am I NOT understanding here?


Attached Files Thumbnail(s)
   
Post Reply Post Reply
#62
I don't know what happened to the data on the summary screen.

Put up the chart 'daily' or whatever data from sleepyhead or your machine screen on what your daily numbers are.
I doubt your current cpap setting of 5.2cm is going to work for you. I would guess it's a matter of increasing the pressure by 1cm at a time till the obstructive apneas are within range. Then fine tune.
Post Reply Post Reply
#63
OK ... I have saved 40 days of data on my SD card but the information makes NO sense, the AHI section is flat-lined, my daily sleep report sent from my machine to my laptop indicated apnea episodes every night, what am I NOT understanding here?
Post Reply Post Reply


#64
Looking at your chart your Machine is a "ResMed Airsense 10 CPAP"  you should change your profile to indicate which model of the airsense you have.


Be aware that this model does not provide detailed data.
Post Reply Post Reply
#65
(05-28-2017, 04:14 PM)ajack Wrote: I don't know what happened to the data on the summary screen.

Put up the chart  'daily' or whatever data from sleepyhead or your machine screen on what your daily numbers are.
I doubt your current cpap setting of 5.2cm is going to work for you. I would guess it's a matter of increasing the pressure by 1cm at a time till the obstructive apneas are within range. Then fine tune.

Thanks ajack ! the DAILY option shows a sad face/frown with a message that it's not available as far as an option.

What has me completely puzzled is how come the "sleep report" I get sent to my computer indicates the number of apnea episode per hour each night but the data on my SD card shows "0" throughout. from my start date until last night in the AHI section of the report? I assume the data is that there have been NO apnea episodes, which is true, the daily sleep report or the data on my SD card?

Sorry, but I'm apparently not having as smooth sailing with this machine data collection which has me not knowing if I'm having ANY apnea episodes at all ?

I tried to attach the 40 days of data collected but for whatever reasons it's not sending the data to "screenshots", I have no idea where it's going to when I click the option to SAVE?
Post Reply Post Reply
#66
(05-28-2017, 04:26 PM)bonjour Wrote: Looking at your chart your Machine is a "ResMed Airsense 10 CPAP"  you should change your profile to indicate which model of the airsense you have.


Be aware that this model does not provide detailed data.

Thanks for responding bonjour !

I'm at a loss as to what "model" you mean? I look at my machine and there is only a label reading Airsense 10 autoset.

Thanks
Post Reply Post Reply


#67
There is a Resmed Airsense 10 which doesn't do data, and a Resmed Airsense 10 Autoset that collects data.
Post Reply Post Reply
#68
(05-28-2017, 08:11 PM)Mogy Wrote: There is a Resmed Airsense 10 which doesn't do data, and a Resmed Airsense 10 Autoset that collects data.

Thanks Mogy !

Yes, I have the airsense 10 autoset but I cannot figure out why the data shows 0 in the AHI column of the report from what was collected on the SD card?
Post Reply Post Reply
#69
(05-28-2017, 09:20 PM)Raggaemon Wrote: .  .  . I cannot figure out why the data shows 0 in the AHI column of the report from what was collected on the SD card?

Make sure all Event Flags are active (Green) in the dropdown box in the lower left of the Daily graphs.  Also, look in File -> Preferences -> Events Tab and make sure they are also selected.
______________________
Useful Links -or- When All Else Fails:
Posting SleepyHead Charts in 5 Easy Steps
Robysue's Beginner's Guide to Sleepyhead
Apnea Helpful Tips
Post Reply Post Reply


#70
(05-28-2017, 09:40 PM)Crimson Nape Wrote:
(05-28-2017, 09:20 PM)Raggaemon Wrote: .  .  . I cannot figure out why the data shows 0 in the AHI column of the report from what was collected on the SD card?

Make sure all Event Flags are active (Green) in the dropdown box in the lower left of the Daily graphs.  Also, look in File -> Preferences -> Events Tab and make sure they are also selected.

Thanks for the reply Crimson Nape !

On my machine the FLAGS tab is inoperable, I'm attaching what I see after loading data.


Attached Files Thumbnail(s)
   
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  First night beginning treatment with DreamStation Falconhoof 11 433 09-14-2017, 03:53 PM
Last Post: Falconhoof
  Update on my Journey with Apnea & POTS BrassCat 3 186 09-01-2017, 03:32 PM
Last Post: srlevine1
  My New ASV Journey Shift Worker 3 174 08-10-2017, 02:07 PM
Last Post: SarcasticDave94
  Beginning care questions Iamthedoctor 12 451 07-28-2017, 12:30 AM
Last Post: quiescence at last
  My Sleep Apnea Journey - Surgery and Results BrianNKY 4 496 05-02-2017, 06:52 PM
Last Post: trish6hundred
  Beginning use with H5i humidifier Lanco 27 1,735 12-07-2016, 02:59 PM
Last Post: Lanco
Ohmy Respironics DreamStation Auto BiPAP - My Journey warmbear 4 786 09-19-2016, 11:36 PM
Last Post: warmbear

Forum Jump:

New Posts   Today's Posts




About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.

For any more information, please use our contact form.