Post Reply 
[CPAP] Classic heater ?
Author Message
R_W_B Offline

Members

Posts: 13
Joined: Jul 2015

Machine: Phillips PR System One 560P, 60 Series REMstar Auto A-flex
Mask Type: Full face mask
Mask Make & Model: unsure
Humidifier: C1
CPAP Pressure: 6 to 12 on Auto
CPAP Software: Not using software

Other Comments:

Sex: Male
Location: U.S.

Post: #11
RE: Classic heater ?
(08-02-2015 05:08 AM)iSnore Wrote:  If you have a heated hose plugged in, you should not see SYSTEM ONE Humidification or be able to access the Classic settings. . . . . . . . .<> . . . . . . . the hose will be 15H if a heated hose is attached and the machine will set this automatically. If it is not a heated hose, you'll see 15 for a 15 mm slimline hose or 22 mm for a standard hose. . . . . . . <> . . . . .

Thanks, I checked and for sure I do not have a heated hose. My current machine settings are working well for me, but I cannot seem to find where to set (or even view) the Pressure (if I ever wanted to experiment).

I do see a pressure of 6 when it first ramps up, but I cannot see it in setup or info. The Veterans Hospital set my pressure when they sent me the card. Is it possible they have locked the pressure setting where I cannot access it ?
08-08-2015 11:06 AM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
Sleeprider Online
Wiki Editor
Advisory Members

Posts: 3,315
Joined: Dec 2014

Machine: Resmed Aircurve 10 Vauto
Mask Type: Nasal pillows
Mask Make & Model: Resmed Airfit P10
Humidifier: Resmed Climateline
CPAP Pressure: Auto Bilevel 18/9, PS 3
CPAP Software: ResScan SleepyHead EncoreBasic

Other Comments:

Sex: Male
Location: Where they make Respironics

Post: #12
RE: Classic heater ?
You can get a clinician setup manual by following the instructions here to get one emailed to you http://www.apneaboard.com/adjust-cpap-pr...tup-manual

The clinical menu is accessed by turning the control knob to Setup, then pressing the control knob and ramp button together until you hear two beeps. That will put you in clinical mode and you can read the pressure, humidity and other settings in the setup menu, and information about the machine blower hours, therapy hours, etc in the INFO menu. Don't make changes until you understand what they are, and it's a good idea to write down the settings you see so you can return to the current settings if you do make changes.

______________________________________________
Organize your SleepyHead Data
Post your SleepyHead Data from Imgur
Robysue's Beginner's Guide to Sleepyhead
08-08-2015 12:05 PM
Find all posts by this user Post Reply Quote this message in a reply
R_W_B Offline

Members

Posts: 13
Joined: Jul 2015

Machine: Phillips PR System One 560P, 60 Series REMstar Auto A-flex
Mask Type: Full face mask
Mask Make & Model: unsure
Humidifier: C1
CPAP Pressure: 6 to 12 on Auto
CPAP Software: Not using software

Other Comments:

Sex: Male
Location: U.S.

Post: #13
RE: Classic heater ?
(08-08-2015 12:05 PM)Sleeprider Wrote:  You can get a clinician setup manual by . . . . . <> . . . . . . Don't make changes until you understand what they are, and it's a good idea to write down the settings you see so you can return to the current settings if you do make changes.

Thanks I will check all that out.
08-08-2015 12:56 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  SysOne "hose heater" - why? touch33 2 526 11-17-2015 12:54 AM
Last Post: eseedhouse
  When to buy new mask, hose, heater, etc SaldusMiegas 6 1,394 07-25-2015 10:20 PM
Last Post: otrpu
  [CPAP] Heater failure Phillips Respironics M series VicPaul 2 868 12-08-2014 08:07 PM
Last Post: archangle
  heater doesn't work but.. bugattisleep 10 2,157 01-13-2014 10:01 PM
Last Post: me50

Forum Jump:

Who's Online (Complete List)