I found the search window when I scrolled down to "post".
Hello Guest,
Welcome to Apnea Board !As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address. Login or Create an Account
What or which is my machine
|
04-26-2016, 08:02 AM
(This post was last modified: 04-26-2016, 08:06 AM by Scrapjockey.)
What or which is my machine
I am attempting to change the air flow/pressure setting on my CPAP, but am having problems identifying my machine. I apologize if this has been run into the ground on previous postings, but I am new and altho I have searched, I have not been able to find a previous thread regarding this issue. Anyway, the "REF" on the bottom of my machine is 460P REMster Pro, DOM. I am unable to match this with the machines listed in the instructions for changing pressure/air flow. Can, or will, someone assist me? Again, I apologize if this has been dealt with in the past. BTW, is there a search window anywhere on the forum site?
I found the search window when I scrolled down to "post".
04-26-2016, 08:37 AM
RE: What or which is my machine
You have a Phillips Respironics 60 Series RemStar Pro.
Order the Clinicians Manual here: http://www.apneaboard.com/adjust-cpap-pr...tup-manual In the meantime, you can access the providers menu by highlighting setup on the screen, then hold down the round knob and the small arrow key at the same time until you hear a double beep. Now you will be able to make the pressure change.
OpalRose
Apnea Board Administrator www.apneaboard.com _______________________ OSCAR Chart Organization How to Attach Images and Files. OSCAR - The Guide Soft Cervical Collar Optimizing therapy OSCAR supported machines Mask Primer INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
04-26-2016, 09:50 AM
(This post was last modified: 04-26-2016, 09:57 AM by Scrapjockey.)
RE: What or which is my machine
Thank you OpalRose. Unfortunately, when I highlite the "setup" and then hold the round knob and arrow key at the same time, it moves to "exit" after one beep. I am going to now, since you ID'd my machine, going to try the method described on the website, unless you can see where I am going wrong with your suggestion.
Scrapjockey OpalRose, I got it. What I did not notice when following your instructions was that the screen changed. I did not hear any beeps. You were exactly correct in your instructions, I as usual, was dense. Thank you again. Scrapjockey
04-26-2016, 10:02 AM
RE: What or which is my machine
Glad it worked. I have the 560 series, and I was assuming the 460 worked the same.
OpalRose
Apnea Board Administrator www.apneaboard.com _______________________ OSCAR Chart Organization How to Attach Images and Files. OSCAR - The Guide Soft Cervical Collar Optimizing therapy OSCAR supported machines Mask Primer INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
04-26-2016, 07:36 PM
RE: What or which is my machine
Hi Scrapjockey,
WELCOME! to the forum.! Much success to you with your CPAP therapy and hang in there for more responses to your post.
trish6hundred
08-25-2016, 07:15 AM
RE: What or which is my machine
Scrapjocky: You are right. I have the same machine, with the exact information on the sticker that you do. I also can not find any information on how the change the pressure settings. I can push the main button and the ramp button, get two beeps and see a new screen. But non of the available selections look like they change the pressure. I have search everywhere.
08-25-2016, 04:11 PM
RE: What or which is my machine
Rotate the knob till control knob till setup shows, then press the control knob and ramp till it beeps then rotate the control knob back to setup and press only the control knob once then your in the main settings. Down load a clinicians manual at the top of Apneaboard main page for PS460 it will help you figure out the settings.
|
« Next Oldest | Next Newest »
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
CPAP Machine Choices - read this before you accept a new machine | SuperSleeper | 291 | 265,207 |
04-15-2024, 05:00 PM Last Post: Poolboy |
|
machine died! Now new doctor and new machine | Bjazzman | 17 | 6,887 |
09-05-2022, 09:07 PM Last Post: NValtman11 |
|
[CPAP] Using SoClean Machine with CPAP Machine | ronald1810 | 4 | 1,353 |
06-01-2022, 10:18 PM Last Post: Sleepster |
|
Pin from power plug stuck in machine ResMed cpap machine | B10576 | 12 | 6,806 |
04-08-2018, 08:24 PM Last Post: Hellodare |
|
Forgot to put card back in machine, is there a way to copy it from machine to card? | Marnid2014 | 6 | 6,299 |
04-06-2014, 08:54 PM Last Post: PaulaO2 |