Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

[CPAP] Old REMstar plus
#1
Old REMstar plus
I have an old REM star plus that quit producing the proper pressure after it had a hard fall although it was still set properly. The insurance company gave me a new REMstar pro M series and the old one sat in a closet for several years.

Recently, I took the old machine apart, but could not determine the problem (no leaks). I reset the pressure to about double and now it produces enough air flow but is way too noisy.

Here is my question... because I am on old cheapskate, I don't want to spend the money to buy another machine but, I have a place on the lake where I would like to keep a spare machine. If I can get the old girl fixed, it would be great. Any advice on how, will be appreciated.
oldman
Post Reply Post Reply



Donate to Apnea Board  
#2
RE: Old REMstar plus
Hi ibfestus,
WELCOME! to the forum.!
Hang in there and maybe someone will have a suggestion for you as to how you can get "The old girl," back up and running tiptop or close to it, (ha-Ha-Ha,) I don't blame you for trying to get it fixed.
trish6hundred
Post Reply Post Reply
#3
RE: Old REMstar plus
(04-21-2013, 05:02 PM)ibfestus Wrote: Recently, I took the old machine apart, but could not determine the problem (no leaks). I reset the pressure to about double and now it produces enough air flow but is way too noisy.

Don't confuse air flow with air pressure. These machines measure the volume flow rate in, say, liters per minute, and the pressure in centimeters of water.

You can make a simple manometer by setting a tub of water in your bathtub or other place where a spill won't be a bother. When the hose is submerged the CPAP machine should make bubbles of air. The depth, in centimeters, to which the end of the hose must be submerged to stop the bubbles is the pressure, in centimeters of water.

The amazing thing is that these CPAP machines are capable of maintaining the desired pressure over a wide range of flow rates.

As far as help fixing the hardware, well, that's been discussed here, and you may even be able to find the service manual for your machine. But these machines are pretty much gone when they're gone, and yours sounds like it's gone.

You should be able to find a cheap replacement from Supplier #2, or even by checking the want ads or craigslist.
Sleepster
Apnea Board Moderator
www.ApneaBoard.com


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  REMstar SE service manual Baretty 9 1,644 06-27-2019, 02:57 AM
Last Post: renmarkbetta
  Help with Settings for Respironics System One (60 Series) RemStar BiPAP Auto wjblevins 12 412 05-01-2019, 01:11 PM
Last Post: wjblevins
  Finding optimum settings for Respironics System One (60 Series) RemStar BiPAP Auto vinitwins 17 518 04-14-2019, 07:59 AM
Last Post: vinitwins
  [CPAP] Remstar Plus with c-flex kclark399 1 276 03-04-2019, 08:54 PM
Last Post: Sleeprider
  REMstar Auto System One 60 Series not recording data wml52 0 196 02-05-2019, 06:31 PM
Last Post: wml52
  Remstar Auto M Series "Service Required" msgill59 5 5,488 02-02-2019, 04:00 PM
Last Post: tommagic1
  Data download directly from Remstar Pro C-Flex+ machine sleepnetlam 6 335 12-31-2018, 03:28 PM
Last Post: sleepnetlam


New Posts   Today's Posts






About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.