Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

[CPAP] Remstar pro2 with C flex
#1
Hi all, I have Remstar pro2 with C flex. On startup it displays E 24 on the screen and I am unable to do anything with it. Buttons flash but do not respond. Any assistance would be greatly appreciated. Cheers
Post Reply Post Reply
#2
Hi Rob,
WELCOME! to the forum.!
Did you try unplugging it and plugging it back in and see if that changed anythihg?
Hang in there and someone will have a suggestion or two.
Best of luck getting your machine straightened out.
trish6hundred
Post Reply Post Reply
#3
Thanks Trish. Yes, tried several times to no avail. Thanks for the welcome and encouraging message. Kind regards, Rob
Post Reply Post Reply


#4
if you go to docstoc and search for "remstar auto c-flex pro 2 warrantypmd", you will find a service manual. Don't know if this is for the pro 2 or not, but it lists error code E24, and states that the machine has to be "recalibrated, replace main PCA."

hope this helps...

Jeez, had to edit this three times----guess its past my bedtime.
Post Reply Post Reply
#5
(04-20-2013, 11:23 PM)grumpycat Wrote: if you go to docstoc and search for "remstar auto c-flex pro 2 warrantypmd", you will find a service manual. Don't know if this is for the pro 2 or not, but it lists error code E24, and states that the machine has to be "recalibrated, replace main PCA."

hope this helps...

Jeez, had to edit this three times----guess its past my bedtime.

Thanks heaps, will check it out now. Hope you had a good sleep. Kind regards, Rob
Thanks heaps, will check it out now. Hope you had a good sleep. Kind regards, Rob
Post Reply Post Reply
#6
Hi Rob! You're in the right place!

Welcome
"With ordinary talent and extraordinary perseverance, all things are attainable." - Thomas Foxwell Buxton

Cool
Post Reply Post Reply




Possibly Related Threads...
Thread Author Replies Views Last Post
  [Admin Note] WANTED: CLINICIAN SETUP MANUAL for 60-series PR System One REMstar Plus w/ C-Flex SuperSleeper 1 72 Yesterday, 07:11 PM
Last Post: Galactus
Question [Equipment] trouble moving from RemStar Auto to AirSense 10 jim.evo 45 935 08-14-2017, 04:21 AM
Last Post: holden4th
  Date not Changing on M Series Remstar redmed 1 89 08-04-2017, 08:20 AM
Last Post: Sleeprider
  How to change Remstar Auto A-Flex to English language Mike2630 5 149 07-31-2017, 12:06 AM
Last Post: Mike2630
  REMstar error reading SD Card tewmw 5 171 07-29-2017, 09:47 PM
Last Post: tewmw
  [Equipment] REMstar Pro C-Flex+ service required message Sultec 6 405 07-19-2017, 01:56 PM
Last Post: Sultec
  [CPAP] FlashAir III w/ PR System 1 A-Flex markn62 11 453 07-09-2017, 06:55 PM
Last Post: markn62

Forum Jump:

New Posts   Today's Posts




About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.

For any more information, please use our contact form.