Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

[CPAP] ResMed AirSense 10 On-Off Switch Fix
#1
ResMed AirSense 10 On-Off Switch Fix
My ResMed AirSense 10 CPAP had an issue that required using excessive force to turn it on and off.  The issue was caused by the on-off micro switch shifting position in its housing.  The issue was fixed by dissembling the CPAP and then pressing the micro switch back into its housing.  Displacement of the micro switch from its housing was caused by cramming the CPAP into a suitcase.  Although the CPAP was in its padded transport case, something hard must have pressed the on-off button during a flight.  It is possible that a pill bottle was on the outside of the case right on top of the on-off button.  My two year warrantee elapsed a year ago.  Although a new replacement Mouser B3F-3125 micro switch was purchased before disassembly of the CPAP, it was not needed.  


The CPAP was disassembled by following excellent instructions provided by Sleep87, sdb7802 and Fats Drywaller.  Thanks.  After the circuit board was exposed, I found that an edge of the pink micro switch plunger was stuck under the aluminum housing.  There was also a gap between the black part of the switch and the aluminum housing.  I pushed the pink plunger into the middle of the hole in the housing and then pushed the black part of the switch back up against the top of the housing.  The aluminum tabs on the bottom of the housing were bent out, so I bent them back in.  The repaired micro switch is shown in Figure 1.

http://www.apneaboard.com/forums/Thread-...irsense-10
http://www.apneaboard.com/forums/Thread-...-10?page=8
http://www.apneaboard.com/forums/Thread-...off-switch


Attached Files Thumbnail(s)
   
Post Reply Post Reply



Donate to Apnea Board  
#2
RE: ResMed AirSense 10 On-Off Switch Fix
Good info to know - thanks for posting!
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Newbie.. sleepstudy completed and need help with Resmed Airsense inital setup SABETTERSLEEP 17 530 08-14-2019, 02:24 PM
Last Post: mesenteria
  Resmed s9 vs airsense humidifier tank capacity? jimofthecorn 2 96 08-08-2019, 02:51 PM
Last Post: jimofthecorn
Question Should I switch to Bi-PAP and is it worth it for me? pr560 10 276 08-06-2019, 11:07 AM
Last Post: pr560
  [CPAP] ResMed AirSense 10 makes loud noise when inhaling. sanger 101 68,361 07-30-2019, 01:31 PM
Last Post: BadGoodDeb
  ResMed AirSense 10 parts diagram bbeardmore 5 855 07-26-2019, 10:26 AM
Last Post: elmerF
  ResMed AirSense 10 Autoset problem Farther 23 1,262 07-16-2019, 10:49 AM
Last Post: Fred Pfeiffer
  Need help choosing right machine for OSA: Resmed Airsense VAuto or ASV strasden 4 330 07-11-2019, 01:25 PM
Last Post: strasden


New Posts   Today's Posts






About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.