Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

CPAP machine PEEP?
#1
My Phillips Respironics Remstar Auto A-Flex machine "PEEPS" every time it is turned on and off. It sounds just like our smoke detector. I have had no luck finding out how to turn off this feature. Does anyone know how it can be slienced?
Post Reply Post Reply
#2
I *think* I looked this up for someone else before. If I remember correctly, there's no way to turn it off. The machine uses the beeps to relay information to the user. Some folks, like you, say it is annoying as heck. Others say they barely notice it.

You could find the sound hole and put a piece of tape over it. As long as the hole is not used as an air port, it should work.
PaulaO2
Apnea Board Moderator
www.ApneaBoard.com


Breathe deeply and count to zen.

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.




Post Reply Post Reply
#3
I looked this up (Google is a great tool!) and the RemStar Auto A-Flex manual, on page 12 has a listing of "Audible Alerts" as they call them. These beeps mean something based on the number and spacing, like 2 beeps followed by one beep or whatever. I would get out your user manual and look up these Audible Alerts to ensure you are getting normal beeps and not beeps indicating some sort of problem. Just a thought.
Mike
As always, YMMV! You do not have to agree or disagree, I am not a professional so my mental meanderings are simply recollections of things from my own life.

PRS1 - Auto - A-Flex x2 - 12.50 - 20 - Humid x2 - Swift FX
Post Reply Post Reply


#4
Hi Richard welcome to forum
I don,t use PRS1, you can check what the beeps and the alerts means in the trouble shooting section of the user manual the one Mike has already mentioned http://respironicsremstars.respironics.com/

Also you can download the clinical manual and here is the setup instructions with pictures and video
http://www.apneaboard.com/pr-system-one-...structions
Post Reply Post Reply
#5
Is it a System One Remstar Auto A-flex? If so, for reference, mine only peeps (barely) when it has just been plugged in and is rebooting, and that tone is just not loud enough to be irritating to anyone. It doesn't peep at all when I just turn it on and off.
Post Reply Post Reply
#6
I have a respironics ASV, it makes the same noise. I like it because I turn my machine off and on in the dark and can tell if I held the button down long enough. I don't consider it annoying, but a helpful feature.
Post Reply Post Reply




Possibly Related Threads...
Thread Author Replies Views Last Post
  Going "Rogue" - Buying a CPAP Machine on Amazon pbwebb 14 696 04-15-2017, 01:07 PM
Last Post: Sleeprider
  No sleep study but buying an auto cpap machine today mikeinthecountry344 9 799 04-15-2017, 01:15 AM
Last Post: Hydrangea
Exclaimation CPAP Machine Choices - read this before you accept a new machine SuperSleeper 16 10,981 04-14-2017, 08:13 PM
Last Post: Sleepster
  [Equipment] CPap Machine Less Air than Usual AlliesNana 10 276 04-14-2017, 02:31 PM
Last Post: Sleeprider
  Help! Changed CPAP Settings, Now Machine Not Working cj789 9 384 04-09-2017, 05:18 PM
Last Post: Ockrocket
  [split] Adjusting your own CPAP machine theintercomm 2 190 04-01-2017, 09:40 PM
Last Post: theintercomm
Question [Equipment] Are CPAP Oil Infusion Adapters safe for machine? Revivified 14 1,217 03-23-2017, 09:12 PM
Last Post: justMongo

Forum Jump:

New Posts   Today's Posts




About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.

For any more information, please use our contact form.