Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

CPAP not clearing data daily
#1
My Resmed CPAP machine is not clearing in the afternoon the hours that I used the machine, etc. Has anyone else experienced this? If so, how is this corrected? Thank you.
Post Reply Post Reply
#2
LCD "Sleep Quality" reset to zero at midday but on "Sleep Report" does not reset to zero so its there until you use the machine again and start the recording for a new day

Welcome to the forum Sleep-well
Post Reply Post Reply
#3
Hi me50,
WELCOME! to the forum.!
Hang in there for more responses to your post and best of luck to you.
trish6hundred
Post Reply Post Reply


#4
(08-15-2013, 08:33 PM)zonk Wrote: LCD "Sleep Quality" reset to zero at midday but on "Sleep Report" does not reset to zero so its there until you use the machine again and start the recording for a new day

Well, maybe I don't understand what you are saying, but, in the past, each day, after 12 PM, it would reset to zero hours.

Thank you for your reply. :-)

[quote='trish6hundred' pid='42894' dateline='1376618701']
Hi me50,
WELCOME! to the forum.!
Hang in there for more responses to your post and best of luck to you.

Thank you
Post Reply Post Reply
#5
Try unplugging, at times rebooting helps reset the machine
Post Reply Post Reply
#6
I went back and looked and now it has reset itself. Thankfully and thank all of you for your replies. I have been reading some comments on here and was surprised at some of the information. The facility that I got my CPAP from did very little to provide me information apparently. I have never unplugged my CPAP machine when not in use and was never told to do so. Also, I must have not been thinking when I filled out my machine info. I have a Resmed Elite and Resmed Humidifier and a Quattro FX full face mask. For about a year, I was constantly having leaks and they said I should have a size medium face mask. Then, they gave me a large face mask and the leaks got worse. Finally, they gave me a small face mask and small headgear and all the leaks stopped. One thing that I have noticed though, is that so many people that I have met tell me once they got adjusted to the CPAP machine, they slept better and longer. I still wake up every 2 or 3 hours. Also, I have read about software and Sleepyhead on this forum. I know nothing about this software and just thought that I had to take my SD card in to be read to check for leaks and my AHI's. Is this the case or can I do this on my own and if so, how. I will be reading more posts to see if I can get the answer to this. Any advice would be much appreciated. Thank you for letting me join this forum!!



(08-15-2013, 10:21 PM)me50 Wrote:
(08-15-2013, 08:33 PM)zonk Wrote: LCD "Sleep Quality" reset to zero at midday but on "Sleep Report" does not reset to zero so its there until you use the machine again and start the recording for a new day

Well, maybe I don't understand what you are saying, but, in the past, each day, after 12 PM, it would reset to zero hours.

Thank you for your reply. :-)

[quote='trish6hundred' pid='42894' dateline='1376618701']
Hi me50,
WELCOME! to the forum.!
Hang in there for more responses to your post and best of luck to you.

Thank you

Post Reply Post Reply


#7
Glad you got it sorted out. which Resmed Elite are you using? S8 or S9

Machine LCD should shows your AHI and leak providing "Sleep Quality" is set to "ON" in the clinical menu

Here is the download links to ResScan and SlepyHead software, SleepyHead only supports S9 (not S8)
http://www.apneaboard.com/forums/Forum-P...-and-Links

If you have not done so already, the manual is available via email
http://www.apneaboard.com/adjust-cpap-pr...tup-manual




Post Reply Post Reply
#8
FYI, I think the machine "day" runs from noon until noon the next day. Make sure that the CPAP Machine TIME is set correctly for AM or PM. Clinician Manuals for your device (thankfully on this Forum) will tell how to change the time if needed, but I think it erases the stored data, so you might want to do it right AFTER your Dr reads data from your SD Card.
Post Reply Post Reply
#9
Mine has cleared each day the whole time I had it except this one time. I am watching it to see if it happens again. I was prescribed the CPAP machine from the sleep study center that did my sleep study so I don't have a doc monitoring it. I monitor it myself. I was also told that I don't go into REM sleep (at least the night I was having the sleep study). I am just curious......have all of you been told to turn your CPAP off during nonuse? I have the S9. Thank you all for your replies
Post Reply Post Reply




Possibly Related Threads...
Thread Author Replies Views Last Post
  First CPAP night, questions about Sleepyhead data lrob123 10 462 05-21-2017, 07:02 PM
Last Post: Surfbear
  Daytime sleepiness despite low AHI, low leak, 7+ hours of daily use vas2000 12 704 03-21-2017, 12:01 PM
Last Post: Marillion
  Airsense 10 CPAP detailed data millerwd 6 670 02-24-2017, 10:19 PM
Last Post: Sleeprider
Question SleepyHead Daily Statistics Melman 1 180 02-10-2017, 02:55 PM
Last Post: chill
  New CPAP User Looking for Sleepyhead Data Interpretation pcplus2 5 582 02-05-2017, 09:04 PM
Last Post: trish6hundred
  Why does Sleepyhead data not match my machine's data? Ihaveapnea 8 761 01-06-2017, 06:19 PM
Last Post: Ihaveapnea
Question A10 autoset in CPAP mode- all data recorded? PreciousRoy 3 411 10-31-2016, 04:25 PM
Last Post: trish6hundred

Forum Jump:

New Posts   Today's Posts




About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.

For any more information, please use our contact form.