Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

CPAP setting feels different on Resmed Vauto vs Elite 10
#1
I don't know if it's me, but having tried both CPAP machine and the Vauto, for some reason, the Vauto for the resmed when the setting is set to CPAP feels significantly better than on the Resmed airsense Elite  10 machine despite both being on the exact same setting. The Resmed Airsense Elite 10 machine makes me feels like I am choking, whereas the VAuto feels more gentle to the face. This either with the EPR off or on. 

Is this a design flaw or intentional? I mean, the Elite sense 10 feels like it just shoves air down the throat but the vauto feels way more comfortable at the same setting.

THe elite sense 10 is new and is fully working after getting it tested.
Post Reply Post Reply



Donate to Apnea Board  
#2
The VAuto and the AutoSet feels the same to me.
Maybe one of the less obvious settings such as the tube type or the AB filter is different between the machines?
Post Reply Post Reply
#3
(12-12-2017, 03:49 PM)yrnkrn Wrote: The VAuto and the AutoSet feels the same to me.
Maybe one of the less obvious settings such as the tube type or the AB filter is different between the machines?

Nope. I swapped the tubbing and the humdifier. Both feel different. I even sync the ramp time up.
Post Reply Post Reply
#4
Maybe use a homemade manometer to measure the pressure?
Post Reply Post Reply
#5
Same mask? Same mask setting? Same Hose length?
Post Reply Post Reply



Donate to Apnea Board  
#6
(12-12-2017, 04:27 PM)Walla Walla Wrote: Same mask?  Same mask setting? Same Hose length?

Yup. Infact, I can tolerate a much higher pressure with the vauto. I have set both to 20 and the vauto I am breath in 20 and breath out too. Like I said, I have both machines. I am using the same mask, same tube and same settings.
Post Reply Post Reply
#7
Also I noticed that EPR is really crap on the elite . It feels like choking in the back of my throat. Whether it's off or on. I really prefer the PS on the bilevel machine because I can set by decimal points. Much easier to breathe.
Post Reply Post Reply
#8
Elite and Autoset S10 are different. At some point you gotta ask yourself $800 vs $1000. There must be some difference.
Post Reply Post Reply
#9
(12-16-2017, 02:06 PM)crowtor Wrote: Elite and Autoset S10 are different. At some point you gotta ask yourself $800 vs $1000. There must be some difference.

This is the not the auto set I have anymore. I should really update my profile. It is now the vauto which is the bilevel machine and the other is the S10 elite. The bilevel when set to S setting is signficantly easier to breathe than the dreaded elite. The stupid doctors here wouldn't give it to me so I went ahead and bought it online. I bought it cheaper too.
Post Reply Post Reply



Donate to Apnea Board  
#10
The s mode does a lot more than just different inhale exhale pressure. I think this is what you are noticing. The Ti/rise time/trigger/cycle
new http://www.apneaboard.com/wiki/index.php...re_success
mask fit http://www.apneaboard.com/wiki/index.php...ask_Primer
From machine or charts for auto-cpap, set the min 1cm below median pressure, or 2cm below 90/95%. max at 20cm for now. Forum will help you fine tune settings
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Resmed air curve 10 vauto Timrtomr 2 64 9 hours ago
Last Post: jaswilliams
  ResMed AirCurve 10 VAuto vs ASV to Treat Central Apnea Ron AKA 17 365 04-20-2018, 12:12 AM
Last Post: Reznik
  Mask Type Setting on Dreamstation bernerbits 10 19,144 04-18-2018, 01:55 PM
Last Post: Walla Walla
  Setting time and date on Resmed Airsense 10 cmadon 22 11,310 04-09-2018, 10:34 AM
Last Post: Crimson Nape
  Pin from power plug stuck in machine ResMed cpap machine B10576 12 1,317 04-08-2018, 08:24 PM
Last Post: Hellodare
  Aircurve Vauto event flags gwc2795 2 111 04-04-2018, 07:42 PM
Last Post: gwc2795
  EPR Setting txrpls 2 159 03-30-2018, 10:01 PM
Last Post: bonjour

Forum Jump:

New Posts   Today's Posts




About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.