Now consider that OMMOHY uses a 35 AH battery for her backup supply... I don't think you will find a UPS with a battery that big.
Hello Guest,
Welcome to Apnea Board !As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address. Login or Create an Account
Can you use a power strip with an xpap?
|
09-12-2017, 11:13 AM
RE: Can you use a power strip with an xpap?
Before you buy a UPS for your CPAP machine, find out what size battery it has... well, try to find out... my two UPS's each have 8 Amp-Hour batteries, as I found out when I replaced one of them. When my power goes out, my computers run for 20 to 30 minutes before they shut down. That's not overnight.
Now consider that OMMOHY uses a 35 AH battery for her backup supply... I don't think you will find a UPS with a battery that big.
09-12-2017, 11:28 AM
RE: Can you use a power strip with an xpap?
yes I noted that but thanks for the reminder...I get more forgetful every day it seems regardless, so the reminder is always welcome
INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEBSITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
09-12-2017, 01:06 PM
RE: Can you use a power strip with an xpap?
I use a surge protector power strip for my unit. Decent ones cost between $20-40. However, I still unplug everything when there are thunderstorms. During thunderstorm season, I always unplugged my more expensive equipment before going to work. Hassle, but it's a bigger hassle with the high deductibles to get it replaced.
09-13-2017, 02:29 PM
RE: Can you use a power strip with an xpap?
We have basic surge protectors on both of our units. Mine gets unplugged when I get up in the morning as the cats have been known to turn it on. I have tried many things (short of putting it in a drawer that I don't have) but they still do it. So, unplugging it in the morning and plugging it back in at night works.
Homer
RE: Can you use a power strip with an xpap?
Maybe I should, too. Right now it's just plugged into a standard 3-way adapter, and I figured that if anything were damaged by a surge, it would just be the AC/DC brick that would take the hit, not the machine itself. On the other hand, that's one big brick, and it says 80 Watts in big letters on it, so I'm sure it would be an expensive proprietary Respironics part to replace.
|
« Next Oldest | Next Newest »
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
Transcend (Somnetics) Micro Power Plug Size | SteadyState | 6 | 1,790 |
03-25-2024, 01:14 PM Last Post: johnbrain |
|
Airsence 10 Date Resets after Power Outrage | Khayyam Qaiser | 2 | 229 |
01-26-2024, 12:12 PM Last Post: Khayyam Qaiser |
|
Philips Respironics DreamStation check power | Steve Foley | 18 | 22,420 |
01-07-2024, 02:09 PM Last Post: zebedee |
|
AirSense 10. Power cable broke on air tube connecting ring. | Ruhtra | 1 | 405 |
11-18-2023, 02:29 PM Last Post: robbob2112 |
|
AirCurve power problem | Shamus54 | 10 | 981 |
10-30-2023, 07:13 PM Last Post: Shamus54 |
|
Resmed Airsense 11 blowing full power with no leaks | bcodemz | 2 | 870 |
10-29-2023, 07:57 PM Last Post: bcodemz |
|
[Equipment] Portable Backup Power for Outages | Craige | 4 | 570 |
10-29-2023, 05:33 PM Last Post: Craige |