Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

"Change Accepted" message over and over again
#11
RE: "Change Accepted" message over and over again
Well, well! I certainly have shown my high level of "newbieness" in the last 24 hours :-(

All is solved here! Both the lock/not locked card problem AND the always showing "Change Accepted" message!

Locked / not locked:
As I pointed out earlier the problem was with my CARD READER that didn't have a locked-checking dispositive incorporated into its design - at least it appears that the El Cheapo Chinese version doesn't :-(

Now to the "Change Accepted" repetative message:
In the EncorePro software, on the page presented after doing a "SAVE" of edited prescription data, there is a button to press called "SEND" which writes the updated data to the SDcard data.

However, in the middle of the page there is a box to tick (or not) called "Erase prescription after successful delivery"

Think about these two words: "SEND" -> "delivery"

My newbie brain looked at the two words "send" and "delivery" and interpeted the box tick to mean "erase the prescription from Encore" as "delivery" must be the result of writing ("SENDing") the data to the SDcard, NOT to mean "Erase the prescription CHANGE from the SDcard after replacing the SDcard in the DreamStation" - so I have been "unticking" the box :-(

I have now "ticked" the box in this "Erase" option and, after replacing the SDcard in my DS the message has disappeared. Problem solved!

I would like to express my heartflet thanks to you guys who have been assisting me to sort out this small problem. I certainly have learnt a lot about my CPAP, SDcard file structure,etc in the process. And also to apologize for creating so much fuss over a problem that turned out in the end, as so often happens in all forums, to be my own silly newbie fault, for having made a mountain out of a molehill SDcard ;-)

Thanks to you guys, and SLEEP WELL!
Post Reply Post Reply



Donate to Apnea Board  
#12
RE: "Change Accepted" message over and over again
Excellent resolution, Roncador! And think you for coming back and telling us. As you've no doubt noticed, most of us use SleepyHead software, so our knowledge of Encore Pro is rather deficient. I, at least, will try to file this tidbit of knowledge away for future use.

Thanks again!
Post Reply Post Reply
#13
RE: "Change Accepted" message over and over again
(08-08-2017, 09:30 AM)pholynyk Wrote: Excellent resolution, Roncador! And think you for coming back and telling us. As you've no doubt noticed, most of us use SleepyHead software, so our knowledge of Encore Pro is rather deficient. I, at least, will try to file this tidbit of knowledge away for future use.

Thanks again!

Greets pholynyk, I also use only SleepyHead most of the time but I wanted to update my "prescription", changing some of the parameters - which may include cmH20 values in the future, and I have to use EncorePro to do this as it appears, at least to my newbie eyes, that SleepyHead is "read-only", i.e. no prescription updating is possible. Am I correct in this way of thinking?
Post Reply Post Reply
#14
RE: "Change Accepted" message over and over again
Correct Sleepyhead cannot write prescription data. It will store data in its own format but should not alter the data on the SD card.

Using FlashAir W-03 SD card in machine. Access through wifi with FlashPAP or Sleep Master utilities.

I wanted to learn Binary so I enrolled in Binary 101. I seemed to have missed the first four courses. Big Grinnie

Post Reply Post Reply



Donate to Apnea Board  
#15
RE: "Change Accepted" message over and over again
(08-08-2017, 10:00 AM)AlanE Wrote: Correct Sleepyhead cannot write prescription data. It will store data in its own format but should not alter the data on the SD card.

Thanks for that AlanE ! So it appears that I did right by going thru the long drawn out pain involved in installing EncorePro - now I can play! :-)
Post Reply Post Reply
#16
RE: "Change Accepted" message over and over again
Hi Roncador,
WELCOME! to the forum.!
It’s great that you found a solution to your problem.

Good luck with CPAP therapy.
trish6hundred
Post Reply Post Reply
#17
RE: "Change Accepted" message over and over again
(08-09-2017, 12:05 AM)trish6hundred Wrote: Hi Roncador,
WELCOME! to the forum.!
It’s great that you found a solution to your problem.

Good luck with CPAP therapy.

Tks for the Greets trish Smile 
Yes, first couple of problems sorted - turned out to be all down to newbie ignorance Sad

Now I'm battling with SleepyHead "Calculating Unintentional Leaks" and setting up Leak Thresholds (Redlines)

For the INTENTIONAL leaks this is what I've come up with for my F-F Amara operating @ 10 cmH2O:

(54-21)*(10-4) / (20-4) + 21 = 33.375 => 33SLPM !!!!!!

which is pretty close to SleepyHead's default assumed value of:

 (48.3-20.1)*(10-4) / (20-4) + 20.1 = 30.7 => 31SLPM

This CPAP business is starting to get complicated and soon I won't be able to sleep just worrying about getting the Math correct!
Bigwink Bigwink
Post Reply Post Reply



Donate to Apnea Board  
#18
RE: "Change Accepted" message over and over again
If you can't sleep, you won't get Sleep apnea ---> Problem Solved!

We're here to help...   Huhsign


Big Grin
Post Reply Post Reply
#19
RE: "Change Accepted" message over and over again
I ran across the same delete after delivery question recently and I was just lucky enough to have guessed right! M glad you figured it out.

QAL
Dedicated to QALity sleep.
You'll note I am listed as an Advisory Member. I am honored to be listed as such. See the fine print - Advisory Members as a group provide advice and suggestions to Apnea Board administrators and staff concerning Apnea Board operation and administrative policies. Membership in the Advisory Member group should not be understood as in any way implying medical expertise or qualification for advising Sleep Apnea patients concerning their treatment.
Post Reply Post Reply
#20
RE: "Change Accepted" message over and over again
Roncador, the Philips machine you use is not affected by system files. Only the Resmed S9 was affected by this problem. The advise to lock the SD card is unnecessary for all other machines.
Post Reply Post Reply



Donate to Apnea Board  


Possibly Related Threads...
Thread Author Replies Views Last Post
  [Symptoms] Can one small Pillow change AHI from 3 to 10 Macros 3 173 04-22-2019, 02:20 PM
Last Post: sheepless
  Should I change my pressure settings? zheshi 9 509 01-28-2019, 09:10 AM
Last Post: bonjour
  Mask change basscatlildave 6 310 01-26-2019, 03:15 PM
Last Post: mesenteria
  [Treatment] AHI going up - Should I change anything? doubledrive 3 258 01-12-2019, 07:12 PM
Last Post: bonjour
  Is it hard to change DME? BeepBeepNoSleep 29 880 12-04-2018, 11:20 PM
Last Post: BeepBeepNoSleep
  Cushion Change Frequency Melman 10 572 12-01-2018, 03:59 PM
Last Post: Apnea Infant
  DreamWear nasal mask - how often to change pillow? OneSnorer 7 560 11-28-2018, 06:59 AM
Last Post: Keljian


New Posts   Today's Posts






About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.