Can anyone tell me if this oximeter model is compatible with Apple and SleepyHead please???
poppypete
Hello Guest,
Welcome to Apnea Board !
ChoiceMMed oximeter MD300W314
|
05-15-2018, 08:42 PM
ChoiceMMed oximeter MD300W314
re: ChoiceMMed oximeter MD300W314
Can anyone tell me if this oximeter model is compatible with Apple and SleepyHead please??? poppypete
05-15-2018, 11:01 PM
RE: ChoiceMMed oximeter MD300W314
I believe the MD300W software only runs on Windows and creates a .dat file which almost works with SleepyHead. Unfortunately there is a bug in the currently released version 1.0-beta. The file reading error will be fixed in the next version, which is still some months away. I'm not sure about the prospects of direct import via USB cable, as I don't have one myself to experiment with.
RE: ChoiceMMed oximeter MD300W314
(05-15-2018, 11:01 PM)pholynyk Wrote: I believe the MD300W software only runs on Windows and creates a .dat file which almost works with SleepyHead. Unfortunately there is a bug in the currently released version 1.0-beta. The file reading error will be fixed in the next version, which is still some months away. I'm not sure about the prospects of direct import via USB cable, as I don't have one myself to experiment with. Thanks for this information pholynyk... I'll check out these now: Contec CMS50D+, CMS50E, CMS50F and CMS50I serial oximeters. Cheers...poppypete
05-15-2018, 11:54 PM
RE: ChoiceMMed oximeter MD300W314
re: CMS50F
Can anyone confirm for me that this oximeter is Apple friendly please? poppypete
05-16-2018, 12:50 AM
RE: ChoiceMMed oximeter MD300W314
The cmd 50f is a good choice and apple friendly with the correct drivers (can be hard to find check the software forum)
05-16-2018, 05:21 AM
RE: ChoiceMMed oximeter MD300W314
(05-15-2018, 08:42 PM)poppypete Wrote: re: ChoiceMMed oximeter MD300W314 My go-to guy for pulse oximeters is Kevin Cooper at vendor #19. I have bought a CMS-50F and a full ResMed/Nonin system from him -- and the customer service was superb as well as his range of knowledge. He has my highest recommendation.
"The object in life is not to be on the side of the majority, but to escape finding oneself in the ranks of the insane." -- Marcus Aurelius
05-16-2018, 08:49 AM
RE: ChoiceMMed oximeter MD300W314
None of the Contec software runs on Apple computers, but with the right driver from SiLabs SleepyHead can do a direct import from the CMS50F or I, but not the D+ (that will be fixed in the next release).
05-16-2018, 03:11 PM
RE: ChoiceMMed oximeter MD300W314
(05-16-2018, 08:49 AM)pholynyk Wrote: None of the Contec software runs on Apple computers, but with the right driver from SiLabs SleepyHead can do a direct import from the CMS50F or I, but not the D+ (that will be fixed in the next release). Thanks guys...I'll follow through with these two contacts. Cheers...poppypete
05-19-2018, 01:03 AM
RE: ChoiceMMed oximeter MD300W314
A bit of an update, and further question/s:
I've heard from Kevin Cooper and we are communicating with each other: "The manufacturer did tell me that it uses the same software platform that the MD300W11 units that we sell use. If that is the case, I would believe that it will be compatible with Sleepyhead but since I have not personally tested this, or have info from anyone that has, I hate to tell you 100% that it will work. Thank you, Kevin Cooper" My reply: "re: "only compatible with Windows OS” Thanks for this response. Raising a couple more questions:
Thanks…Peter. …Ps: what units can you sell me that are compatible with Apple and SleepyHead???" While awaiting further advice from Supplier #19 I've had some joy using an old Windows which is not internet connected (nor do I want to do that, for security reasons, and past issues)...but I now have the software of both the oximeter and SleepyHead running on it. This suggests I should be able to have the ChoiceMMed oximeter MD300W314 .dat files and my SleepyHead SD card downloads to sync with each other, once I get my head around the threads I've been seeing in this Forum. Before I go any further however, I wonder if anyone of you can assist me to be able to change the parameters on these reports, within the program options...as per attachments. Thanks...poppypete
05-19-2018, 09:42 AM
RE: ChoiceMMed oximeter MD300W314
phew! Your O² sat looks like mine did before I was given supplemental oxy! Hope you aren't suffering the sleep-deprivation feelings I used to have.
Glad you've gotten the softwares working; sorry you had to resort to Windows versions. |
« Next Oldest | Next Newest »
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
Added a new pulse oximeter importer... | spacewrench | 125 | 20,310 |
04-14-2024, 12:12 PM Last Post: msfabus |
|
csv-converter for like nx-8462 oximeter | capman | 1 | 195 |
03-15-2024, 04:45 AM Last Post: capman |
|
thumbdrive-oximeter-format-analysis | capman | 6 | 274 |
03-15-2024, 04:29 AM Last Post: capman |
|
CMS50F Oximeter Device not Recognized. | ThinMountainAir | 20 | 2,554 |
03-07-2024, 05:13 PM Last Post: capman |
|
csv-format for generic oximeter imports into oscar | capman | 2 | 204 |
03-07-2024, 07:06 AM Last Post: capman |
|
python file converter for EMAY sleep pulse oximeter | joeblough | 1 | 665 |
03-04-2024, 10:26 PM Last Post: ElectricalPaul |
|
Need Computer drivers for Contec CMS50D+ Oximeter | TomElgin | 3 | 281 |
03-02-2024, 05:27 PM Last Post: Crimson Nape |