Hello Guest,
Welcome to Apnea Board !As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address. Login or Create an Account
Clearing rain out from tubing
|
RE: Clearing rain out from tubing
Hi Trish6hundred. Thanks for the welcome. I haven't been having too much trouble with rain out. When I put the post up was the worst case. It was very bad that time as there was a lot of condensation and water droplets in the tubing.
07-06-2016, 10:02 PM
RE: Clearing rain out from tubing
Just updating my post. I had pretty severe rainout problems a couple more times with the colder weather here in Australia (winter now ). I have turned the temp down to 27 degrees and the humidity level down to 4. I also found a setting in the machine called ( run warmup). I have used that for the last 2 nights and here has been no condensation or rainout in the tubing so far. Hopefully I have found the solution for the problem. Thanks for he helpful advice.
07-07-2016, 01:56 AM
RE: Clearing rain out from tubing
Hi Shokk,
I had pretty bad rainout in Sydney last week. I actually didn't know what was happening as I had never experienced it before but my bedroom temp was probably under 10c. Using the P10 I guess the water droplets pretty much blocked the P10's vent so I couldn't really breath which caused a bit of panic. At 3am or so I didn't know what was happening so I just changed the mask to another P10 with limited success. The next day with most of my wits about me I realised what had happened and why "droplets of water kept falling from the ceiling on my pillow" so I cranked the tube temp to 4 (Respironics) and didn't have a prob.
07-07-2016, 04:21 AM
RE: Clearing rain out from tubing
(07-07-2016, 01:56 AM)Dafod Wrote: Hi Shokk, I am glad you sorted the rainout problem out. Hopefully I have sorted mine out as well. The colder weather has had an effect on it, for sure. |
« Next Oldest | Next Newest »
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
drying out tubing with machine | sleepingbetterinFl | 2 | 200 |
04-15-2024, 04:49 PM Last Post: sleepingbetterinFl |
|
[Equipment] How to stop rain out from external humidifier? | SluggerBaloney | 7 | 264 |
04-02-2024, 02:08 PM Last Post: SluggerBaloney |
|
Using cleaning brushes in heated tubing | TiredTom111 | 9 | 649 |
01-29-2024, 08:30 PM Last Post: TechieHippie |
|
ResMed AirSense 11 + ClimateLine 11 Heated Tubing + Oxygen | YankeeLaker | 2 | 396 |
01-22-2024, 08:17 PM Last Post: YankeeLaker |
|
Mold issue / cleaning CPAP (the unit, not tubing), Resmed S9 | NightOwl42 | 9 | 845 |
01-19-2024, 11:29 PM Last Post: NightOwl42 |
|
Oxyair tubing for Resmed AS11? | CactusJack2 | 2 | 430 |
12-25-2023, 05:44 PM Last Post: CactusJack2 |
|
Tubing Mod to Reduce Resmed Airmini + Zephair adapter Inhalation Noise | dil950 | 1 | 678 |
12-21-2023, 06:04 AM Last Post: RSki |