Hello Guest,
Welcome to Apnea Board !As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address. Login or Create an Account
Climate line tubing for the S9 - What setting?
|
09-01-2012, 08:16 PM
RE: Climate line tubing for the S9 - What setting?
How do you change the humidity. I know how to change the temperature but am not sure how to change the humidity
09-01-2012, 08:51 PM
RE: Climate line tubing for the S9 - What setting?
Roxy wrote:
How do you change the humidity. I know how to change the temperature but am not sure how to change the humidity If your talking about the humidity level just turn the knob till the humidity comes up, it will have off or the level, push the knob down and turn it to change the level
09-01-2012, 10:42 PM
RE: Climate line tubing for the S9 - What setting?
There's also the climate control which does both the temp of the humidifier heater and the temp of the hose. Do you have the clinician's manual? It tells how to get in there and set that up if you want to control them separately.
PaulaO
Take a deep breath and count to zen.
09-01-2012, 11:02 PM
RE: Climate line tubing for the S9 - What setting?
(09-01-2012, 08:16 PM)Roxy Wrote: How do you change the humidity. I know how to change the temperature but am not sure how to change the humidityIts all explained with pictures in the clinical manual..You can get the manual from Apnea Board via Email (scroll down to section three) http://www.apneaboard.com/adjust-cpap-pr...tup-manual S9 setup instruction and video http://www.apneaboard.com/resmed-s9-cpap-setup Here are the humidifier and climate line users guides http://www.resmed.com/au/assets/document...ac_eng.pdf http://www.resmed.com/au/assets/document...lo_eng.pdf
03-03-2013, 12:39 AM
(This post was last modified: 03-03-2013, 12:41 AM by Nick - Atl.)
RE: Climate line tubing for the S9 - What setting?
I use manual setting because I need a lot of humidity to avoid congestion. I set humidity to 6 and the temperature to 85 and have no problem with rainout. The night-time temperature in the bedroom is around 60 to 65 degrees in the winter.
Sorry, just realized I committed the sin of resurrecting an old thread... sigh...
03-03-2013, 12:59 AM
RE: Climate line tubing for the S9 - What setting?
RE: Climate line tubing for the S9 - What setting?
(03-03-2013, 12:39 AM)Nick - Atl Wrote: I use manual setting because I need a lot of humidity to avoid congestion. I set humidity to 6 and the temperature to 85 and have no problem with rainout. The night-time temperature in the bedroom is around 60 to 65 degrees in the winter. Hi Nick - Atl, welcome to the forum! I tried the Automatic setting for humidifier and also prefer more humidity. I use Manual settings (5.5/86F) and haven't have problems with rainout, but did have rainout at 6. Sometimes still have rainout in my full face mask when night-time temperature around 60, but I usually sleep with my head under the covers, which eliminates rainout in my mask. Take care, --- Vaughn
The Advisory Member group provides advice and suggestions to Apnea Board administrators and staff on matters concerning Apnea Board operation and administrative policies. Membership in the Advisory Member group should not be understood as in any way implying medical expertise or qualification for advising Sleep Apnea patients concerning their treatment.
03-03-2013, 12:07 PM
RE: Climate line tubing for the S9 - What setting?
If you are totally lost about rain out and where to set things you can compute the dew point with this chart.
You need to know your room temperature and humidity. A cheapie temp and humidity display for $8 is all you need to find out the first two variables. If you know the dew point, then you know the temperature below which you must not go or condensation will occur in your hose. So always have your hose temperature *higher* than the dew point and you'll get ZERO rainout. Find your room temperature on the top scale for (F) and bottom for © plug in the humidity reading on the diagonal color coded lines and read out the dew points (rt = F) (left = C) If your air temperature is about 60F and hose humidity is 70% you can figure on keeping the hose temps at least 3-5 degrees (F) higher than room temps. Whether or not that temperature is comfortable or not depends on the individual. Wow...that was really boring wasn't it? Anyway, properly applied, it does work because you are using Applied Science! Enjoy! =^.^=
"With ordinary talent and extraordinary perseverance, all things are attainable." - Thomas Foxwell Buxton
03-03-2013, 02:04 PM
RE: Climate line tubing for the S9 - What setting?
No wonder I've had no rainout since using the climateline hose. With an air temp at night of 55 degrees and a relative humidity (on a good day) that makes it to 25%, the chart indicates (I think) that any temperature above freezing would work.
Shastzi - Did I read it right? Thanks!
03-03-2013, 02:27 PM
RE: Climate line tubing for the S9 - What setting?
You got it, aehjr!
"With ordinary talent and extraordinary perseverance, all things are attainable." - Thomas Foxwell Buxton
|
« Next Oldest | Next Newest »
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
drying out tubing with machine | sleepingbetterinFl | 2 | 202 |
04-15-2024, 04:49 PM Last Post: sleepingbetterinFl |
|
Resmed Airsense 10 time to return to low pressure setting | jfchap | 3 | 142 |
04-13-2024, 03:54 PM Last Post: SarcasticDave94 |
|
Tube Temp and Humidity Setting To Avoid Rainout | tomkelly | 10 | 280 |
04-11-2024, 11:11 PM Last Post: tomkelly |
|
Trigger Setting Switch - Aircurve 10 | MrIvanDrago | 4 | 155 |
04-09-2024, 12:35 PM Last Post: MrIvanDrago |
|
CPAP to ASV setting translation? | Moemah123 | 2 | 524 |
04-03-2024, 10:30 AM Last Post: Yujiyun |
|
Not Sure if Setting Changes Helping - Help Appreciated! | WiscoKate | 6 | 261 |
03-25-2024, 11:54 AM Last Post: WiscoKate |
|
Setting time and date on Resmed Airsense 10 | cmadon | 42 | 32,500 |
03-08-2024, 09:13 AM Last Post: Sleeprider |