Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Did Resmed change the Airfit P10 Ports?
#1
Has anyone with a recently purchased Airfit P10 noticed a change in the exhale ports? More noise and much higher volume air flow that disturbs a sleeping partner. Anyone know how to address this question directly to Resmed? My DME does not have a clue about my observations.

Don - 18 years on CPAP
Post Reply Post Reply
#2
(01-10-2016, 11:35 AM)numbersman Wrote: Has anyone with a recently purchased Airfit P10 noticed a change in the exhale ports? More noise and much higher volume air flow that disturbs a sleeping partner. Anyone know how to address this question directly to Resmed? My DME does not have a clue about my observations.

Don - 18 years on CPAP


That's interesting. My current P10 mask seemed a little different that the prior one I was using. The air flow from the exhaust was not as strong but was still quiet.

This seems to be opposite of what you describe.

Although, it hasn't affected my therapy that I can tell.
OpalRose
Apnea Board Moderator
www.ApneaBoard.com

How to Organize and Post ScreenShots

http://sleep.tnet.com/resources/sleepyhead/shorganize
https://sleep.tnet.com/reference/tips/imgur

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.




Post Reply Post Reply
#3
I've had several p10 masks at this point... 4 I think and each of them has had a slightly different venting. I do think that the most recent of them had the most venting, and given that there have been many complaints of no venting, it stands to reason that they might have deliberately opened it up a bit. On the other hand, maybe there is just a wide variation in the tolerance allowed by QA (assuming they have QA Tongue ).
هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه
Tongue Suck Technique for prevention of mouth breathing:
  • Place your tongue behind your front teeth on the roof of your mouth
  • let your tongue fill the space between the upper molars
  • gently suck to form a light vacuum
Practising during the day can help you to keep it at night

هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه
Post Reply Post Reply


#4
(01-10-2016, 01:01 PM)DariaVader Wrote: On the other hand, maybe there is just a wide variation in the tolerance allowed by QA (assuming they have QA Tongue ).

The "headgear" and lack of hose pivot proves they don't have QA/QC.
Laugh-a-lot
PaulaO2
Apnea Board Moderator
www.ApneaBoard.com


Breathe deeply and count to zen.

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.




Post Reply Post Reply
#5
(01-10-2016, 09:07 PM)PaulaO2 Wrote:
(01-10-2016, 01:01 PM)DariaVader Wrote: On the other hand, maybe there is just a wide variation in the tolerance allowed by QA (assuming they have QA Tongue ).

The "headgear" and lack of hose pivot proves they don't have QA/QC.
Laugh-a-lot

Well, if there is no standard set, than it's QA problem. If one is set, than it's QC problem. So, what's the standard? Asking as a happy P10 user who suddenly gets concerned that his next P10 may be nothing like his current one...

BTW. One of the things I like the most about the P10 is the virtual lack of the headgear...
Post Reply Post Reply
#6
(01-10-2016, 10:02 PM)GPSMapNut Wrote: BTW. One of the things I like the most about the P10 is the virtual lack of the headgear...

yup, me2
هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه
Tongue Suck Technique for prevention of mouth breathing:
  • Place your tongue behind your front teeth on the roof of your mouth
  • let your tongue fill the space between the upper molars
  • gently suck to form a light vacuum
Practising during the day can help you to keep it at night

هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه
Post Reply Post Reply


#7
(01-10-2016, 10:43 PM)DariaVader Wrote:
(01-10-2016, 10:02 PM)GPSMapNut Wrote: BTW. One of the things I like the most about the P10 is the virtual lack of the headgear...

yup, me2

X3
Post Reply Post Reply
#8
(01-10-2016, 09:07 PM)PaulaO2 Wrote:
(01-10-2016, 01:01 PM)DariaVader Wrote: On the other hand, maybe there is just a wide variation in the tolerance allowed by QA (assuming they have QA Tongue ).

The "headgear" and lack of hose pivot proves they don't have QA/QC.
Laugh-a-lot

C'mon Paula, tell us what you really think!! Dielaughing

Admin Note:
PaytonA passed away in September 2017
Click HERE to read his Memorial Thread

~ Rest in Peace ~
Post Reply Post Reply
#9
(01-10-2016, 11:35 AM)numbersman Wrote: Has anyone with a recently purchased Airfit P10 noticed a change in the exhale ports? More noise and much higher volume air flow that disturbs a sleeping partner. Anyone know how to address this question directly to Resmed? My DME does not have a clue about my observations.

Don - 18 years on CPAP

Yes! I noticed this when my DME sent a replacement frame/hose. You could feel the air flow straight in front of the mask (in AND out) from an arm length away, which annoyed my wife and me. I complained and they gave me a completely new mask instead of just a new frame/hose, which for whatever reason didn't have the same issue.

I think there is too much tolerance in the manufacturing of the fine mesh exhale ports, and we will likely see more of this in the future, which is unfortunate because one of the best features of this mask is the diffuser ports that don't allow a stream of air flow. When you are a side or stomach sleeper, facing your partner, it makes a big difference.

I reported the issue directly to ResMed, and of course they didn't even respond.

Post Reply Post Reply


#10
as a new user of the p10 I don't know what it is supposed to feel like. It does seem hard to breath out and I find myself opening my mouth to get a deep breath but this is mostly during the ramp period. Does anyone else have trouble with it hurting your nostrils in the morning? I have been on this therapy for 6 weeks and have tried 5 masks now. I can't get any to work for me. I am very frustrated now.
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Sudden Change to AHI After Dreamstation Firmware Upgrade RWhipkey 3 44 36 minutes ago
Last Post: RWhipkey
  AirFit P10 fitting Melman 7 431 12-15-2017, 08:41 PM
Last Post: Walla Walla
  Constant Air the same even when i change settings blackhawk2737303 6 235 12-11-2017, 04:16 PM
Last Post: Sleeprider
Question [Equipment] I have purchased an Airfit p10 mask TimtheEnchanter 6 229 12-02-2017, 10:57 AM
Last Post: TimtheEnchanter
  Change Therapist? DBTaylor 7 312 11-11-2017, 02:02 PM
Last Post: WakingDead
  [split] AirFit™ N20 fitting mogulman 3 298 11-09-2017, 09:52 AM
Last Post: mogulman
  AirFit F20 "For Her" for him? Orionsnet 28 1,817 11-07-2017, 07:48 PM
Last Post: pupcamper

Forum Jump:

New Posts   Today's Posts




About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.

For any more information, please use our contact form.