Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

DreamStation/SleepMaster data download
#1
Question 
I switched yesterday from a straight Cpap to the DreamStation Auto Cpap
with a FlashAir card installed. I connect to it using SleepMaster.
My display on the DreamStation, this morning, shows the limited data such
as Hrs 8.1,Ahi 5.2,Mask fit 97%, Periodic Breathing 1%, and 90% pressure 9.0.
When I try to download more complete information via SleepMaster it starts
to download then I get this message:
"It appears your Flash Air does not contain any session data, other than a
summary of previous sessions"
What am I doing wrong?
Post Reply Post Reply
#2
You've indicated it is an auto pap, so it should be able to collect the detail data.
Have you tried the card directly in your PC or Mac?
                                                                                                                                                                                  
Please organize your SleeyHead screenshots like this.
I'm an epidemiologist, not a medical provider. 
Post Reply Post Reply
#3
(01-27-2017, 05:47 PM)Beej Wrote: You've indicated it is an auto pap, so it should be able to collect the detail data.
Have you tried the card directly in your PC or Mac?

No, but since I posted I tried another download app and it worked and then I used
Sleephead to display it and all the detailed data is there so I don't know what's wrong
with SleepMaster.
Post Reply Post Reply


#4
When you configured SleepMaster, did you configure it to use SleepyHead to display the data? That is an option.
                                                                                                                                                                                  
Please organize your SleeyHead screenshots like this.
I'm an epidemiologist, not a medical provider. 
Post Reply Post Reply
#5
(01-27-2017, 07:19 PM)Beej Wrote: When you configured SleepMaster, did you configure it to use SleepyHead to display the data? That is an option.

Yes, but the problem I'm having is SleepMaster won't download the data.
Post Reply Post Reply
#6
(01-27-2017, 07:25 PM)CurtRug Wrote:
(01-27-2017, 07:19 PM)Beej Wrote: When you configured SleepMaster, did you configure it to use SleepyHead to display the data? That is an option.

Yes, but the problem I'm having is SleepMaster won't download the data.

Hi Folks,

Sleep Master needs to find a minimum of two days of sleep data on the FlashAir before it can accurately download.

Tom  Coffee
Post Reply Post Reply


#7
Ah....  <lightBulb on/>  That explains some problems I had a while ago.  Thanks Tom!
Post Reply Post Reply
#8
(01-28-2017, 01:33 AM)chill Wrote: Ah....  <lightBulb on/>  That explains some problems I had a while ago.  Thanks Tom!

I had to uncheck "Run Viewer after Download" on SleepMaster Viewer Configuration,
before it would download properly. Pressing "Start SleepMaster Data Viewer" will bring
up the built in data viewer but so far the information I see on it is erroneous like an
AHI of 366 where sleepyhead says 3.5. I don't know if this is a bug or something I'm
doing wrong. No big deal as Sleepyhead data agrees with the data I read directly off
the DreamStation display.
Post Reply Post Reply
#9
(01-28-2017, 11:10 AM)CurtRug Wrote:
(01-28-2017, 01:33 AM)chill Wrote: Ah....  <lightBulb on/>  That explains some problems I had a while ago.  Thanks Tom!

I had to uncheck "Run Viewer after Download" on SleepMaster Viewer Configuration,
before it would download properly. Pressing "Start SleepMaster Data Viewer" will bring
up the built in data viewer but so far the information I see on it is erroneous like an
AHI of 366 where sleepyhead says 3.5. I don't know if this is a bug or something I'm
doing wrong. No big deal as Sleepyhead data agrees with the data I read directly off
the DreamStation display.

I still have the bad data showing when I try to use the SleepMaster Data Viewer. Anybody else
using it, if so does it work for you?
Post Reply Post Reply


#10
(01-30-2017, 11:26 PM)CurtRug Wrote:
(01-28-2017, 11:10 AM)CurtRug Wrote:
(01-28-2017, 01:33 AM)chill Wrote: Ah....  <lightBulb on/>  That explains some problems I had a while ago.  Thanks Tom!

I had to uncheck "Run Viewer after Download" on SleepMaster Viewer Configuration,
before it would download properly. Pressing "Start SleepMaster Data Viewer" will bring
up the built in data viewer but so far the information I see on it is erroneous like an
AHI of 366 where sleepyhead says 3.5. I don't know if this is a bug or something I'm
doing wrong. No big deal as Sleepyhead data agrees with the data I read directly off
the DreamStation display.

I still have the bad data showing when I try to use the SleepMaster Data Viewer. Anybody else
using it, if so does it work for you?


If you can send me a compressed copy of your SD card, I would like to take a look at the problem you are having. Sleep Master works fine with the DreamStation 500 data I have on hand. To Send your data go to  http://www.sleepmaster.org/contact.html.

Tom  Coffee
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  SleepyHead & Dreamstation BiPAP AutoSV Greggory 1 65 10-19-2017, 01:38 PM
Last Post: Greggory
  EncorePro 2.2 [no data available on Dreamstation Auto SV?] RLSdss 5 196 10-12-2017, 12:05 PM
Last Post: SuperSleeper
  sleepyhead SD card download kooly 6 259 10-09-2017, 08:18 PM
Last Post: AlanE
  cpap info download with no SD card, external modem only confusedcpap 4 176 10-07-2017, 04:31 AM
Last Post: confusedcpap
  DreamStation BT Pairing code? grahamwright1 3 247 10-05-2017, 08:04 AM
Last Post: xntrick
  Anyone have a Mac and Dreamstation ASV? tjwoody 4 366 09-13-2017, 07:57 PM
Last Post: tjwoody
  Philips respironics Dreamstation BiPap auto SV ADVANCED woolno 4 397 09-12-2017, 05:36 PM
Last Post: gtrlum

Forum Jump:

New Posts   Today's Posts




About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.

For any more information, please use our contact form.