Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

DreamStation Software Now Available [EncorePro v.2.17.8.0]
#41
So, I just registered today. I have the DreamStation Auto. I guess I am wondering if there are issues installing EncorePro on a Win 10 64 bit system. I see so many who say it worked fine and others who quote a bunch of SQL issues. Is there any way to insure all will be OK before I install? I plan to do a full image first just in case!

Thank You for this board!
#42
Hello, Tinkerbell. Welcome to the board. You have come to the right place to get information on sleep apnea.

I have a DreamStation Pro. I run EncorePro on Windows10 64 bit through Parallels on my Mac. It works great. Keep in mind you will have to download your data every day if you want access to waveform info for every day.

Sleep well,
pupcamper
#43
Thank You. Can I download the date every few days, or even once a week?

Also, I assume that the reader I have that reads SD cards, etc will be OK with the SD card. I still plan on making the card read only as suggested on SleepyHead.


#44
Yes, you can download your data at whatever interval you want. If you want waveform data for every day, however, you need to download your data everyday. It can be a chore, but the wave forms are worth the effort. Some of us are using wifi sd cards in our CPAP machines which makes the process easier as well as faster. By searching the forum for wifi sd cards you will find several threads on the subject that explain how to set up and use the Toshiba Flashair card.

Your card reader should work fine. I forgot to lock my card one day. Neither DreamStation or EncorePro were affected by the extra files Windows writes to the card. Apparently my sleep doctor's software wasn't affected either, because I didn't notice I had failed to lock my card until after he had downloaded my 90 day compliance info off of it. I'm sure he uses EncorePro as well.

pupcamper
#45
Great, I can look into wifi sd cards, but not sure I need it. First I need the software.
#46
(02-25-2016, 08:26 PM)pupcamper Wrote: By searching the forum for wifi sd cards you will find several threads on the subject that explain how to set up and use the Toshiba Flashair card.

Using the Flashair card with a Dreamstation will be problematic until SleepyHead is updated to work on Dreamstation. Encore will not work with files on your hard disk, it has to be on an SD card. You might get it to work by copying the data to an SD card and then running Encore.

Get the free SleepyHead software here.
Useful links.
Click here for information on the main alternative to CPAP.
If it's midnight and a DME tells you it's dark outside, go and check it yourself.


#47
(02-28-2016, 10:36 PM)archangle Wrote:
(02-25-2016, 08:26 PM)pupcamper Wrote: By searching the forum for wifi sd cards you will find several threads on the subject that explain how to set up and use the Toshiba Flashair card.

Using the Flashair card with a Dreamstation will be problematic until SleepyHead is updated to work on Dreamstation. Encore will not work with files on your hard disk, it has to be on an SD card. You might get it to work by copying the data to an SD card and then running Encore.

That is exactly what I do. I put an extra sd card I had laying around in my DreamStation, let it format it and load all of my data onto the card. I plugged the card into my computer (where I leave it) and assigned it to my profile in EncorePro. I use FlashPAP to load the data from the Flashair card in my DreamStation onto the sd card. When I exit FlashPAP, it opens EncorePro and I download the data from the sd card to EncorePro. If my computer is already booted, which it usually is, it only takes a couple of minutes to complete the whole process.

pupcamper
#48
I was able to download and open the Encore Pro software. That's as far as I get. I don't know what to do next. I took the card out of my dream station and put it into a SD reader and connected it to computer and doesn't do anything. Please Help! Thanks
#49
The first thing you need to do is add a patient. Select that patient then you can then click on the symbol with the + on it to download from the SD card. You should also go to the office settings tab to set the right time zone.


#50
I have some questions regarding software for DreamStation.

Will EncorePro give me visibility to Central Apneas?

Are we expecting SleepyHead to be available in days rather than weeks?

Do you know if JediMark will be coding a Mac version?

Thanks



Possibly Related Threads...
Thread Author Replies Views Last Post
  Anyone have a Mac and Dreamstation ASV? tjwoody 4 221 09-13-2017, 07:57 PM
Last Post: tjwoody
  Philips respironics Dreamstation BiPap auto SV ADVANCED woolno 4 218 09-12-2017, 05:36 PM
Last Post: gtrlum
  Flow Limit Graph ? Dreamstation RustySocket 2 94 09-09-2017, 02:56 PM
Last Post: RustySocket
  EncoreBasic and the DreamStation mraroid 7 228 09-04-2017, 09:01 PM
Last Post: robertbuckley
  Current firmware for the Philips dreamstation johnathonm 47 12,495 09-04-2017, 04:35 PM
Last Post: mattmill
  Software to program DreamStation DSX700T11? mraroid 6 354 08-16-2017, 04:54 PM
Last Post: pupcamper
  EncorePro 2 & Respironics PR System One AUTO 750P mraroid 2 307 08-05-2017, 07:34 PM
Last Post: robertbuckley

Forum Jump:

New Posts   Today's Posts




About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.

For any more information, please use our contact form.