Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account

New Posts   Today's Posts

[Equipment] Airfit P10 Repair
Airfit P10 Repair
I have been using an Airfit P10 mask for several years, but I'm a cheap kinda guy, so when things break I try to fix it myself. If you search my posts you will find how I replaced the headgear with my own made out of cheap elastic from a sewing supply store. Well, now I have a new success to report:

My current mask suddenly started blowing air down onto what would be my mustache if I had one, and on closer examination I discovered that there was a hole at the top of the hose where it connects to the plastic frame that holds the pillow. The hole happened from stress and movement back and forth where the tube connects to the plastic frame part. It was big enough to slide a regular pencil or pen into it.

I tried poking the tube up into the plastic frame part far enough to cover the hole, hoping to glue it in once I got it secure, but it was hopeless. After sitting and staring at the hose with a hole in it for a while it dawned on me that what I needed was a tube of a diameter slightly less than the hose and the plastic frame that holds the pillows, about 1.5cm (0.4"), and after rummaging around a bit I found one. It was a ChapStick™ lip balm, made in the US by Robins Company, Richmond, Virginia 23220. Mine was almost used up, so I decided to sacrifice the remainder, figuring that my night-time breathing was more important than the health of my lips. I cleaned it out and cut off the ends to leave me a clear tube, and after sticking one end into the tube and the other end into the plastic frame, my mask functions without leaks as before.

If you're an Airfit P10 user who likes to avoid unnecessary expenses, I hope this tip can save you having to order a whole new mask. Smile
Post Reply Post Reply

Donate to Apnea Board  
RE: Airfit P10 Repair
well done sir!

It''s good to read a success story. the one that served me well was the wiki about adjusting a mask to solve leak issues.The writer emphasized making small changes, and checking to make sure that straps on each side were the same length. Top=top. Bottom=Bottom. K keep going back to that one....

compliant for 35 years /// Still learning!

ResMed N20; ResMed P30i modified headgear; F&P Evora Full FFM

I'm just a cpap user like you. I don't give medical advice. Seek the advice of a physician before seeking treatment for medical conditions including sleep apnea. Sleep-well

Post Reply Post Reply

Possibly Related Threads...
Thread Author Replies Views Last Post
  AirFit F20 Irritating Nose Bridge SavvApnea 27 764 7 hours ago
Last Post: ECM5
  [CPAP] Question for those with the Airfit F30i mask ECM5 24 708 06-27-2022, 10:48 PM
Last Post: BobbieM
  AirFit F30 current user, looking for alternatives KSMatthew 11 449 06-27-2022, 12:33 PM
Last Post: KSMatthew
  Autoset 10 repair? Nightynite 8 363 06-22-2022, 10:17 AM
Last Post: cpapuserzzz
  Airtouch/Airfit F20 Elbow Failing JohnHornbuckle 5 205 06-04-2022, 10:48 PM
Last Post: GuyScharf
  Does Airfit P30I work well for side sleepers ckingzzzs 2 264 06-01-2022, 10:08 AM
Last Post: costa71
  mask liner for resmed airfit F30i? cberistain 24 1,891 02-27-2022, 11:08 PM
Last Post: DaveL

New Posts   Today's Posts

About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.