Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

[Equipment] Dream station DSX500
#1
How do you control the brightness of the screen at night?
Post Reply Post Reply



Donate to Apnea Board  
#2
I found a product called Light Dims (regular strength) on the great river in the cloud which I used to cover the overly bright LEDS on practically everything I have in my bedroom/study. As well as all the dots you could ever want, the package I got has two pieces about 1" by 2.25" which might cover the Dreamstation display.
Post Reply Post Reply
#3
(05-14-2016, 10:11 AM)pholynyk Wrote: I found a product called Light Dims (regular strength) on the great river in the cloud which I used to cover the overly bright LEDS on practically everything I have in my bedroom/study. As well as all the dots you could ever want, the package I got has two pieces about 1" by 2.25" which might cover the Dreamstation display.

looking for a command in the software on the machine that will control the light intensity rather than adding a aftermarket device.
thanks,

Post Reply Post Reply
#4
(05-14-2016, 10:11 AM)pholynyk Wrote: I found a product called Light Dims (regular strength) on the great river in the cloud which I used to cover the overly bright LEDS on practically everything I have in my bedroom/study. As well as all the dots you could ever want, the package I got has two pieces about 1" by 2.25" which might cover the Dreamstation display.

+1 lightdims are great!
(05-14-2016, 01:45 PM)berge Wrote:
(05-14-2016, 10:11 AM)pholynyk Wrote: I found a product called Light Dims (regular strength) on the great river in the cloud which I used to cover the overly bright LEDS on practically everything I have in my bedroom/study. As well as all the dots you could ever want, the package I got has two pieces about 1" by 2.25" which might cover the Dreamstation display.

looking for a command in the software on the machine that will control the light intensity rather than adding a aftermarket device.
thanks,

good luck with that, let us know if you find it Wink
Post Reply Post Reply
#5
(05-14-2016, 01:55 PM)palerider Wrote:
(05-14-2016, 10:11 AM)pholynyk Wrote: I found a product called Light Dims (regular strength) on the great river in the cloud which I used to cover the overly bright LEDS on practically everything I have in my bedroom/study. As well as all the dots you could ever want, the package I got has two pieces about 1" by 2.25" which might cover the Dreamstation display.

+1 lightdims are great!
(05-14-2016, 01:45 PM)berge Wrote:
(05-14-2016, 10:11 AM)pholynyk Wrote: I found a product called Light Dims (regular strength) on the great river in the cloud which I used to cover the overly bright LEDS on practically everything I have in my bedroom/study. As well as all the dots you could ever want, the package I got has two pieces about 1" by 2.25" which might cover the Dreamstation display.

looking for a command in the software on the machine that will control the light intensity rather than adding a aftermarket device.
thanks,

good luck with that, let us know if you find it Wink

no luck in the machine clinical mode. lightdims is probably the answer. for now just repositioning the face of the unit.
Post Reply Post Reply



Donate to Apnea Board  
#6
Hi berge,
WELCOME! to the forum.!
Hang in there for more responses to your post and much success to you with your CPAP therapy.
trish6hundred
Post Reply Post Reply
#7
(05-14-2016, 10:11 AM)pholynyk Wrote: I found a product called Light Dims (regular strength) on the great river in the cloud which I used to cover the overly bright LEDS on practically everything I have in my bedroom/study. As well as all the dots you could ever want, the package I got has two pieces about 1" by 2.25" which might cover the Dreamstation display.

LightDims made the job! 

Thanks
Post Reply Post Reply
#8
(05-14-2016, 01:45 PM)berge Wrote:
(05-14-2016, 10:11 AM)pholynyk Wrote: I found a product called Light Dims (regular strength) on the great river in the cloud which I used to cover the overly bright LEDS on practically everything I have in my bedroom/study. As well as all the dots you could ever want, the package I got has two pieces about 1" by 2.25" which might cover the Dreamstation display.

looking for a command in the software on the machine that will control the light intensity rather than adding a aftermarket device.
thanks,

Unfortunately, I don't think there is one.  This has been a pretty common complaint with the dreamstation.
Post Reply Post Reply
#9
Light dims, very interesting, had never seen them, cool idea. Might have to get some and check that out I have some annoying lights.
If everyone thinks alike, then someone isn't thinking.
Everyone knows something, together we could know everything.
Post Reply Post Reply



Donate to Apnea Board  


Possibly Related Threads...
Thread Author Replies Views Last Post
  [Equipment] Dream Station ASV - why doesn't it count BiPAP pulses? problemchild 4 138 02-14-2018, 08:52 AM
Last Post: problemchild
  Dream Station Ramp and Pressure Settings knowoneuno 29 10,905 01-23-2018, 03:27 PM
Last Post: Crimson Nape
  [Equipment] Respironics Dream Stn Cellular in Australia Moriarty 4 191 01-10-2018, 04:48 AM
Last Post: Moriarty
  [Equipment] Dream Station heated tube fault Van Winkle 5 244 01-06-2018, 02:58 PM
Last Post: trish6hundred
  DreamStation DSX500 or Respironics DS560 quatrain 8 255 12-30-2017, 09:32 PM
Last Post: Sleeprider
  Dream Station Humidfier question Joe Basil 7 366 10-24-2017, 10:58 PM
Last Post: trish6hundred
  Resmed S10 Airsense vs. Respironics Dream Station Weird Tolkienish Figure 130 52,874 10-20-2017, 07:20 AM
Last Post: tedgreen

Forum Jump:

New Posts   Today's Posts




About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.