Post Reply 
[Equipment] F&P Icon Auto (the saga of data self management)
Author Message
woozie38 Offline

Advisory Members

Posts: 248
Joined: Jan 2013

Machine: Fisher & Paykel Icon + Auto
Mask Type: Full face mask
Mask Make & Model: F&P Simplus
Humidifier: Integral
CPAP Pressure: 8 to 14
CPAP Software: SleepyHead Other Software

Other Comments: 17 years of CPAP + supp. oxygen @ 3 L/min

Sex: Male
Location: Toowoomba, Queensland Australia

Post: #11
RE: F&P Icon Auto (the saga of data self management)
My Icon firmware is also 3.00 same as yours. When you insert the card make sure the computer sees it as it can be installed upside down.
In sleepyhead select import from new location, when the drive listing come up select the one that will say "FPHCARE (E: )". The "E"may be a different letter on you computer. DONOT select any directory below the drive name.

Let me know what message is displayed if it still is not working.
[/quote]
Woozie38
Had another go at importing data from USB stick - no luck. Message reads, " Couldn't find any new machine data at the location given." I'm trying to import from the root directory but the dialogue box drills down to the last file/s, which won't import.
05-25-2014 06:17 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
BreathlessTom Offline

Preferred Members

Posts: 27
Joined: Aug 2013

Machine: F & P ION Auto
Mask Type: Nasal mask
Mask Make & Model: Quattro FX
Humidifier: Built in
CPAP Pressure: 11-20
CPAP Software: SleepyHead

Other Comments: Note in my doctors office: If you wake up breathing, Congratultions you have another chance

Sex: Male
Location: USA

Post: #12
RE: F&P Icon Auto (the saga of data self management)
The dialogue box will allow you to drill down but don't, just select the drive letter and click ok (or whatever it says)

You can try creating an additional user and see if it imports. I did that once but then the original user name import started to work.
05-26-2014 07:55 PM
Find all posts by this user Post Reply Quote this message in a reply
woozie38 Offline

Advisory Members

Posts: 248
Joined: Jan 2013

Machine: Fisher & Paykel Icon + Auto
Mask Type: Full face mask
Mask Make & Model: F&P Simplus
Humidifier: Integral
CPAP Pressure: 8 to 14
CPAP Software: SleepyHead Other Software

Other Comments: 17 years of CPAP + supp. oxygen @ 3 L/min

Sex: Male
Location: Toowoomba, Queensland Australia

Post: #13
RE: F&P Icon Auto (the saga of data self management)
You can try creating an additional user and see if it imports. I did that once but then the original user name import started to work.
[/quote]

I have found the reason data wont import. It's because I'm using Win XP. Turns out the specially created dialogue box is not presented in XP, so it's not possible to point to the root directory.

[Image: signature.png]Keep on breathin'
05-26-2014 10:05 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
BreathlessTom Offline

Preferred Members

Posts: 27
Joined: Aug 2013

Machine: F & P ION Auto
Mask Type: Nasal mask
Mask Make & Model: Quattro FX
Humidifier: Built in
CPAP Pressure: 11-20
CPAP Software: SleepyHead

Other Comments: Note in my doctors office: If you wake up breathing, Congratultions you have another chance

Sex: Male
Location: USA

Post: #14
RE: F&P Icon Auto (the saga of data self management)
I am using XP sp3. What SH version are you trying? I have .93 or something with 9 and 3. That computer is upstairs. I thing there maybe a later SH version which I have not used.
05-27-2014 07:35 PM
Find all posts by this user Post Reply Quote this message in a reply
woozie38 Offline

Advisory Members

Posts: 248
Joined: Jan 2013

Machine: Fisher & Paykel Icon + Auto
Mask Type: Full face mask
Mask Make & Model: F&P Simplus
Humidifier: Integral
CPAP Pressure: 8 to 14
CPAP Software: SleepyHead Other Software

Other Comments: 17 years of CPAP + supp. oxygen @ 3 L/min

Sex: Male
Location: Toowoomba, Queensland Australia

Post: #15
RE: F&P Icon Auto (the saga of data self management)
(05-27-2014 07:35 PM)BreathlessTom Wrote:  I am using XP sp3. What SH version are you trying? I have .93 or something with 9 and 3. That computer is upstairs. I thing there maybe a later SH version which I have not used.
Hi Tom,
My version of SH is 09.5. Maybe the problem I got my Son, a computer programmer, to look at it and what I posted is his remarks. He said it would work with Vista up, but not XP.
cheers, Geoff

[Image: signature.png]Keep on breathin'
05-27-2014 09:01 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
BreathlessTom Offline

Preferred Members

Posts: 27
Joined: Aug 2013

Machine: F & P ION Auto
Mask Type: Nasal mask
Mask Make & Model: Quattro FX
Humidifier: Built in
CPAP Pressure: 11-20
CPAP Software: SleepyHead

Other Comments: Note in my doctors office: If you wake up breathing, Congratultions you have another chance

Sex: Male
Location: USA

Post: #16
RE: F&P Icon Auto (the saga of data self management)
I just found that the last version 0.9.5 does have a bug with the dialog box in xp. I did not know that release was out. Also 0.9.6 should be out shortly and has improved Icon support and fixes at bug.
Use 0.9.3 if it is still available.
05-28-2014 06:11 PM
Find all posts by this user Post Reply Quote this message in a reply
woozie38 Offline

Advisory Members

Posts: 248
Joined: Jan 2013

Machine: Fisher & Paykel Icon + Auto
Mask Type: Full face mask
Mask Make & Model: F&P Simplus
Humidifier: Integral
CPAP Pressure: 8 to 14
CPAP Software: SleepyHead Other Software

Other Comments: 17 years of CPAP + supp. oxygen @ 3 L/min

Sex: Male
Location: Toowoomba, Queensland Australia

Post: #17
RE: F&P Icon Auto (the saga of data self management)
(05-28-2014 06:11 PM)BreathlessTom Wrote:  I just found that the last version 0.9.5 does have a bug with the dialog box in xp. I did not know that release was out. Also 0.9.6 should be out shortly and has improved Icon support and fixes at bug.
Use 0.9.3 if it is still available.

That's good to know, Tom. I hope it's not too long coming. I know the author of SH is "one of us" and it may take more time. In the meantime I will look at installing 09.3
best wishes, Geoff

[Image: signature.png]Keep on breathin'
05-28-2014 06:26 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
woozie38 Offline

Advisory Members

Posts: 248
Joined: Jan 2013

Machine: Fisher & Paykel Icon + Auto
Mask Type: Full face mask
Mask Make & Model: F&P Simplus
Humidifier: Integral
CPAP Pressure: 8 to 14
CPAP Software: SleepyHead Other Software

Other Comments: 17 years of CPAP + supp. oxygen @ 3 L/min

Sex: Male
Location: Toowoomba, Queensland Australia

Post: #18
RE: F&P Icon Auto (the saga of data self management)
My Icon firmware is also 3.00 same as yours. When you insert the card make sure the computer sees it as it can be installed upside down.
In sleepyhead select import from new location, when the drive listing come up select the one that will say "FPHCARE (E: )". The "E"may be a different letter on you computer. DONOT select any directory below the drive name.
Let me know what message is displayed if it still is not working.
[/quote]

I have upgraded my OS to Win7. Now SH works just fine. Now able to view my sleep info. SH displays a lot more data than Resmed, so have to learn what the extra graphs all mean. Not used to no X-Y axis graduation labels though.

[Image: signature.png]Keep on breathin'
06-01-2014 06:44 PM
Find all posts by this user Post Reply Quote this message in a reply
woozie38 Offline

Advisory Members

Posts: 248
Joined: Jan 2013

Machine: Fisher & Paykel Icon + Auto
Mask Type: Full face mask
Mask Make & Model: F&P Simplus
Humidifier: Integral
CPAP Pressure: 8 to 14
CPAP Software: SleepyHead Other Software

Other Comments: 17 years of CPAP + supp. oxygen @ 3 L/min

Sex: Male
Location: Toowoomba, Queensland Australia

Post: #19
RE: F&P Icon Auto (the saga of data self management)
Quote:Let me know what message is displayed if it still is not working.

All is well now with Sleepyhead. I changed my OS from XP to W7 x86 and Sleepyhead works fine. The software displays a lot of data, far more than Rescan. However the time line shows time from 12:30 to 20:30. Since I go to bed around 22:30 & wake<>05:30, this makes now sense to me. Anyone have the same issue?

[Image: signature.png]Keep on breathin'
06-13-2014 06:16 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
APAAW Offline

Preferred Members

Posts: 54
Joined: Nov 2013

Machine: Respironics 660 BiPAP Series One
Mask Type: Full face mask
Mask Make & Model: ResMed Mirage Quattro
Humidifier: Respironics Series One
CPAP Pressure: 9.5 - 13.5 BiPAP
CPAP Software: SleepyHead

Other Comments: My second time on CPAP, finally successfully

Sex: Male
Location: Kansas USA

Post: #20
RE: F&P Icon Auto (the saga of data self management)
I'm not acquainted with the Fisher & Paykel Icon Auto - does it let you set or adjust its clock time?

In my Sleepyhead 0.9.3 W7 x64, under File/Preferences/Setting there's a choice of "Day Split Time" - you might check that to see if that somehow went away from what we'd otherwise expect.
06-13-2014 08:18 PM
Find all posts by this user Post Reply Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Bernerbits' ongoing CPAP/meds/insomnia saga bernerbits 63 2,553 11-23-2016 10:45 AM
Last Post: richb
  Icon+ Won't Write to USB Arend 2 186 11-05-2016 02:32 AM
Last Post: PsychoMike
  Icon Premo not recording data Veracityau 3 177 10-26-2016 10:12 PM
Last Post: Veracityau
  airsense10 auto cpap(for him) VS DreamStation Auto CPAP DSX500T11 w/HT humid rookiepom 5 866 10-09-2016 07:52 AM
Last Post: stephennic
  Pleas help does anyone use a F&P Icon 0rangebear 3 420 09-05-2016 06:12 PM
Last Post: 0rangebear
  Sleepyhead data vs. Doctor's data Daisylouu 8 1,402 09-01-2016 06:10 PM
Last Post: eseedhouse
Ohmy Resmed S9 auto vs Airsense 10 auto sleepyonpar1 6 724 08-11-2016 09:10 PM
Last Post: zonk

Forum Jump:

Who's Online (Complete List)