[attachment=1098]
I'll have to wait until someone else is home to have help measuring. According to the thing I cut out, I fell right into the middle of the small.
Take a deep breath and count to zen.
Hello Guest,
Welcome to Apnea Board !
[Equipment] Had it with lip leaks - going FFM
|
11-17-2014, 03:57 PM
RE: Had it with lip leaks - going FFM
I used the pdf size thingy to figure out what size to get. Let me see if I can attach it.
[attachment=1098] I'll have to wait until someone else is home to have help measuring. According to the thing I cut out, I fell right into the middle of the small.
PaulaO
Take a deep breath and count to zen.
RE: Had it with lip leaks - going FFM
I used the Quattro FX FFM for several years - having previously had a much less positive experience with a F&P one - and agree with previous posts that it is an excellent mask.
But over the summer I switched to the Quattro AirFit F10 which in effect is the next generation version of the Quattro FX. I struggled with leaks at first, but persevered and after a few weeks learned how to keep the leaks under control. As a previous poster said, it's really important to get the straps symmetrical - not just even lengths either side of the mask, but also to get the upper one the same distance (latitude & longitude, if you see what I mean) from the ears. With both masks I sometimes have to check I've got them on; and provided the straps are aligned correctly and you tighten them following ResMed's instructions, they don't leak into the eyes. The reason I persevered with the Quattro AirFit F10 was because, not only is it noticeably lighter, but it has only 3 parts, making it much easier & quicker to wash. That is especially valuable when travelling. But both masks are great, at least for me, and I hope your new Quattro FX works well for you too.
11-17-2014, 04:35 PM
RE: Had it with lip leaks - going FFM
(11-17-2014, 03:57 PM)PaulaO2 Wrote: I used the pdf size thingy to figure out what size to get. Let me see if I can attach it. I was told by the RT that fit me, that my face fell halfway between the medium and the small. He gave me a medium. I have a short distance from my upper lip to my nose. I have now tried the small also and find that either one does a good job. It does take some work to get the fit right and I find that I do a better job if I do the fitting with my machine set to CPAP mode.-obviously with no ramp or EPR. Best Regards, PaytonA
Admin Note:
PaytonA passed away in September 2017 Click HERE to read his Memorial Thread ~ Rest in Peace ~
11-17-2014, 05:10 PM
(This post was last modified: 11-17-2014, 05:12 PM by surferdude2.)
RE: Had it with lip leaks - going FFM
I don't like the points of measurement that the template has been designed to use. I think comparing a measurement between the points where you want the mask cushion to land to the actual cushion measurement center to center would be a better choice.
The nose bridge location doesn't necessarily dictate where the best landing area below could be.
11-17-2014, 05:20 PM
RE: Had it with lip leaks - going FFM
Yeah, I ignored the "chin wrinkle" thing. I figured it needed to sit below my lip and on the bridge of my nose. I used the template as a guide and just "winged" it. If it is the wrong size, they are not that far down the road and I can get another size.
PaulaO
Take a deep breath and count to zen.
11-17-2014, 05:37 PM
(This post was last modified: 11-17-2014, 06:05 PM by surferdude2.)
RE: Had it with lip leaks - going FFM
I measured my medium mask cushion and I get 3 3/4" (95 mm.) from top center of the cushion to the bottom center.
As I stated earlier, my desired mask cushion landing spots on my face are only 2 7/8' apart (73 mm.) but I could tolerate anything from a 3" (76 mm.) to a 2 3/4" (70 mm.) span so that's why I'm thinking I may need a small rather than a medium. I can't be sure since I don't know what the small mask measures from those points. If I only knew the measurement of the small cushion, top center to bottom center, I could possibly decide better.
11-17-2014, 10:02 PM
RE: Had it with lip leaks - going FFM
OH! you want me to measure the MASK not my own face. Yeah, I can do that. I am blonde, you know, right? I will measure as soon as I get it. Just remind me. 'Cause I'm blonde. Remember that. 'Cause I won't.
PaulaO
Take a deep breath and count to zen.
11-17-2014, 10:08 PM
RE: Had it with lip leaks - going FFM
Both would be nice. You can do the face measurement in the bathroom mirror. I just wish that ResMed would give us the measurements and not dumb it down to a printer produced template.
The reason I wanted your facial measurement is that if the small mask works for you and my face measures the same, it should work for me. This medium one is all I have ever used but I have trouble keeping the leaks down on it. Thanks for your attention, Dude
11-17-2014, 10:22 PM
RE: Had it with lip leaks - going FFM
Hey Dude,
The measurement that you are after for the small Mirage Quattro is 3.5". Gaging the measurement on my face from the crease above my chin to the bridge of my nose adjacent to the corner of my eye (which is where Resmed thinks the mask should seal +/- .25") it just happens to be 3.5". The small works fine for me and I like the way that it fits better than the medium even though the medium worked well too. Best Regards, PaytonA
Admin Note:
PaytonA passed away in September 2017 Click HERE to read his Memorial Thread ~ Rest in Peace ~ |
« Next Oldest | Next Newest »
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
Evora FFM Phantom Leaks | psinderbrand | 8 | 445 |
04-09-2024, 11:43 PM Last Post: QT Pie |
|
OSCAR flow rate assessment -- mouth leaks, palatal prolapse? | manders513 | 9 | 363 |
03-22-2024, 06:16 PM Last Post: BigWing |
|
Help regarding managing leaks | Strange54 | 0 | 145 |
03-09-2024, 10:12 AM Last Post: Strange54 |
|
Chin cushion for mouth leaks | AReedy | 9 | 560 |
02-25-2024, 09:38 PM Last Post: AReedy |
|
Humidifier Chamber Leaks - Resmed 10 | Old Mike | 20 | 912 |
02-23-2024, 10:44 AM Last Post: robbob2112 |
|
[Treatment] Are leaks the problem or do I need BIPAP? | TiredDude | 3 | 377 |
02-22-2024, 07:52 PM Last Post: Sleeprider |
|
[Equipment] Hybrid mask discontinued, new AirFit 30 leaks! | LessSleepyHalf | 3 | 1,045 |
02-18-2024, 11:06 AM Last Post: Jay51 |