Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

[Equipment] Pressure sensor tubing for resmed vpap adapt sv
#1
I just purchased a used ResMed VPAP Adapt SV because I have no insurance and it was a smokin' deal. I have done a sleep study and did have a script for one back when I did have insurance, so I know my pressure setting and thanks to this forum how to adjust it. Problem is when I got it home I realized it was missing the pressure sensor tubing and distal cuff that goes with it and as far as I can tell, the machine won't work without it. After doing some research I discovered that these two parts were going to cost me about $25 each.Confused I was wondering if anyone out there has successfully tried using an oxygen titration adapter and oxygen tubing instead cause I can get those for about $3 each on ebay.
Post Reply Post Reply
#2
I can't see any reason it wouldn't work. It's just providing a sample point close to the mask so it gets an accurate pressure sample. In fact if your mask has O2 injection port(s) you could hook the sample tubing there and it would work.
Post Reply Post Reply
#3
Hi kcmair,
WELCOME! to the forum.!
Hopefully, you are able to get your machine up and running.
Hang in there for more suggestions, best of luck to you.
trish6hundred
Post Reply Post Reply


#4
(05-02-2014, 02:35 PM)Bama Rambler Wrote: In fact if your mask has O2 injection port(s) you could hook the sample tubing there and it would work.

No such luck but I am going to give it a try with the adapter. I'll let you know how it turns out.
(05-02-2014, 03:36 PM)trish6hundred Wrote: Hi kcmair,
WELCOME! to the forum.!
Hopefully, you are able to get your machine up and running.
Hang in there for more suggestions, best of luck to you.

Thanks Trish!
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
Question [Pressure] New ResMed Airsense 10 Pressure Problem spookyac47 5 229 09-16-2017, 03:44 PM
Last Post: trish6hundred
  [Equipment] Viscious cycle of increased pressure -> more leak -> response of more pressure 3mp0w3r 5 180 09-16-2017, 09:04 AM
Last Post: OpalRose
  [Pressure] ResMed FX Pressure settings? Belmontdave 2 167 08-26-2017, 11:33 PM
Last Post: trish6hundred
  VPAP III ST-A Zed. 5 161 08-24-2017, 10:14 PM
Last Post: Zed.
  Where can I find the static pressure I would need for true cpap from my Resmed S9 Reptile 4 206 08-24-2017, 09:03 PM
Last Post: trish6hundred
  VPAP and mask compatibility bigschtick 8 269 08-09-2017, 01:55 AM
Last Post: trish6hundred
  How to hook CMS50I oximeter's finger-puylse sensor to laptop USB 2SleepBetta 10 513 08-02-2017, 12:29 AM
Last Post: aquanaut20

Forum Jump:

New Posts   Today's Posts




About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.

For any more information, please use our contact form.