Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

[Equipment] Puritan bennet Goodknight 420g error In1 help
#11
RE: Puritan bennet Goodknight 420g error In1 help
(06-14-2013, 01:17 PM)Somniculosus Wrote:
(06-13-2013, 02:34 PM)Lburas Wrote:
(06-12-2013, 09:16 PM)Somniculosus Wrote: Dear Lburas,
When you access the settings, it is the sixth option (1st one is the pressure, 2nd the ramp time, 3rd the starting ramp pressure, 4th the hour meter value, 5th the compliance meter and the 6th is the pressure sensor.) Pages 12-14 of the manual. It doesn't actually say off and on. I set the number all the way up and now it doesn’t auto shut off. Hope this helps!

Thanks so much for your reply! I followed the directions on pages 12-14. The sixth option (pressure sensor) was set at 160. I used the button to increase it all the way to maximum (255) , but it went right back to 160. Is there a step I have missed? A button to push to save the new setting?
Thanks again!
Linda

Hi,
I just pushed the information access button until it exited. Mine saved without doing anything else. I am sorry. I hope you can get it to save. That can be so frustrating! Maybe unplug the machine for 15 seconds, then plug it back it and try again?

Hubby says he was able to save the higher 255 pressure sensor setting, but the pressure still drops and it gives the ln 1 error code. I guess the machine is kaput, although it would work for someone who just needs a 4 setting.
Just curious if you use a regular hose or a special one ( the respiratory tech who checked the pressure for me told me I needed a special pressurized hose, whereas I always used a regular hose with it.) thank you again for your help!
Post Reply Post Reply
#12
RE: Puritan bennet Goodknight 420g error In1 help
(06-14-2013, 08:41 PM)Lburas Wrote:
(06-14-2013, 01:17 PM)Somniculosus Wrote:
(06-13-2013, 02:34 PM)Lburas Wrote: Thanks so much for your reply! I followed the directions on pages 12-14. The sixth option (pressure sensor) was set at 160. I used the button to increase it all the way to maximum (255) , but it went right back to 160. Is there a step I have missed? A button to push to save the new setting?
Thanks again!
Linda

Hi,
I just pushed the information access button until it exited. Mine saved without doing anything else. I am sorry. I hope you can get it to save. That can be so frustrating! Maybe unplug the machine for 15 seconds, then plug it back it and try again?

Hubby says he was able to save the higher 255 pressure sensor setting, but the pressure still drops and it gives the ln 1 error code. I guess the machine is kaput, although it would work for someone who just needs a 4 setting.
Just curious if you use a regular hose or a special one ( the respiratory tech who checked the pressure for me told me I needed a special pressurized hose, whereas I always used a regular hose with it.) thank you again for your help!

Hi, Sorry for the delay, I was out of town and sadly my PB420G completely "bit the dust". I actually took in in to a CPAP place and they said the blower motor is gone.
I just used/use a regular hose. Sorry you are having difficulties.
Post Reply Post Reply
#13
RE: Puritan bennet Goodknight 420g error In1 help
I set mine to 255 and it cut off quicker, so I set it to 0, now works like a charm. To save it, I pressed the hidden button, once I changed the setting, then pressed the information access button until it excit the menu. That was the only way mine kept the change.
Post Reply Post Reply
#14
RE: Puritan bennet Goodknight 420S error In1 help
That worked on my 420S, but had to set it from 150 to 1 for it to take the settings. I also had to use the secret "OO" button twice then the Info Access to save the settings. Mahalo!  Thanks
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  New User - Mask Seal Error WJ5596 6 335 02-12-2024, 02:57 PM
Last Post: WJ5596
Gross DreamStation Error Front Panel drouou 2 185 02-10-2024, 04:17 PM
Last Post: drouou
  Error 1 Rafael Bezerra 1 326 12-20-2023, 09:00 PM
Last Post: OpalRose
  Airsense 11. Heating system error Jskier 3 6,174 12-12-2023, 11:30 AM
Last Post: PeaceLoveAndPizza
  [Equipment] Resvent iBreeze 25STA error code: 609 Mic0228 0 762 09-24-2023, 08:18 AM
Last Post: Mic0228
  Does a Large Leak Cause An AHI Error? BlueSky1958 3 813 07-19-2023, 06:07 PM
Last Post: Jeff8356
  Apex XT Auto CPAP - Error 003 - Factory Reset? zephyr325 0 853 05-24-2023, 03:52 PM
Last Post: zephyr325


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.