Hello Guest,
Welcome to Apnea Board !As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address. Login or Create an Account
[Equipment] RESMED S9 Need some help. reading same info every day.
|
07-09-2013, 01:47 PM
RE: RESMED S9 Need some help. reading same info every day.
I guess the important thing is that the right treatment is still delivered at the mask, but I still think it's inexcusable that the machines need to be reset once in a while to get the data working. It's not something I expect from an expensive medical appliance.
07-09-2013, 04:16 PM
RE: RESMED S9 Need some help. reading same info every day.
Would this be a good time to re-open the "ResMed vs Respironics" discussion again?
07-09-2013, 04:59 PM
RE: RESMED S9 Need some help. reading same info every day.
Although I haven't had the issue myself, I still think I'd rather unplug the ResMed once in a while than to bare the looks of a Respironics. Remember, I also have to live with it while I'm awake!
... I jest! Kids, don't make commitments based on looks alone. It invites maintenance issues.
07-09-2013, 05:20 PM
RE: RESMED S9 Need some help. reading same info every day.
05-13-2020, 04:48 AM
RE: RESMED S9 Need some help. reading same info every day.
I have a similar issue on my ResMed s9 where I have recently noticed that when I check my sleep quality report in the morning, it reads Usage 0.0 hrs, Mask Fit red face and AHI -.
This has never happened to me before and I know I am sleeping over 7 hours without any issues; I usually get readings where the Usage is anywhere between 7 to 9 hours (depending on how long I sleep), Mask Fit is a green smiley face and my AHI reading is anywhere between 1.0 - .05 Please let me know if anyone has encountered similar issues and steps to resolve. For tonight I have unplugged the unit, removed the SD card, waited for about 5 minutes and reinserted the SD card and plug the unit back into the electrical outlet, in the hopes of resetting the system. Any feedback would be appreciated.
05-13-2020, 03:11 PM
RE: RESMED S9 Need some help. reading same info every day.
This is an old thread but after midday the stats shown onscreen clear and reset to zero chech the time set on your S9
|
« Next Oldest | Next Newest »
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
Please, need help reading the leak rate and LL info | chronic | 4 | 135 |
03-18-2024, 08:05 AM Last Post: chronic |
|
Help reading OSCAR data | JenniferJuniper | 20 | 992 |
03-08-2024, 02:12 PM Last Post: JenniferJuniper |
|
Resvent iBreeze APAP and BiPAP info | TechieHippie | 2 | 262 |
02-04-2024, 03:11 PM Last Post: TechieHippie |
|
Help with reading OSCAR and adjusting settings | deirdrepen | 2 | 239 |
01-24-2024, 11:06 AM Last Post: deirdrepen |
|
Do Doctors Even Have Access to Flow Limits Info? | paulag1955 | 16 | 697 |
01-17-2024, 03:11 PM Last Post: dataq1 |
|
Help reading Oscar Charts | Wisurid | 3 | 386 |
12-25-2023, 05:26 PM Last Post: PeaceLoveAndPizza |
|
DreamStation Go Recall [consolidated replacement & compensation info & questions] | PHXSleeper | 127 | 19,662 |
12-17-2023, 06:31 AM Last Post: Tampa Jim |