Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

[Equipment] Repair myself
#1
Repair myself
error 1019 resmed auto 25.

dead, dead or can i repair myself?
Post Reply Post Reply
#2
RE: Repair myself
Hi sunnyorm,
WELCOME! to the forum.!
Hang in there for suggestions and best of luck to you.
trish6hundred
Post Reply Post Reply
#3
RE: Repair myself
ResMed doesn't let anyone know what their error codes mean.

I did a Google search and found this on another forum: (The reliability of this information is unknown!)

Quote:Error 1019 means the flow sensor is stuck at a low value. The most common reason for this is water from the humidifier has got back into the device. If this is the case, it won't be covered by the warranty.

And the next one says:

Quote:Hello, this just happened to us while on vacation because the machine got knocked over. This is what worked for me. Take the humidifier off of the machine. Take a blow dryer and on low setting, lightly blow into the machine. When I plugged it back in the error message was gone. This will buy us time to get home and get it checked out by a professional. Good luck!

On our old board, someone else had the error code. SuperSleeper suggested this:
Quote:Wish I could provide more help, but this looks like a problem that only a ResMed repair facility can fix. Only other thing you might want to try is to disconnect the humidifier and hose from the machine, take all filters out, unplug it, and let the CPAP machine dry out completely (maybe in front of a fan) for several hours, then start it up and see if the problem persists. Mostly likely, this will not solve the issue, however, but it might be worth a try.

The user never came back with a report so don't know if that worked.

Another place also said water damage.
PaulaO

Take a deep breath and count to zen.




Post Reply Post Reply
#4
RE: Repair myself
from my S8 clinical manual trouble shooting ... page 52
Display errormessage: Exxxx (where xxxx defines an error)

Component failure. Return the S8 AutoSet II for servicing.
is the machine still under the warranty otherwise call Resmed customer service and you can give a call to either cpap repairer #27 and #28
they might be able to tell you if worth to repair or not
http://www.apneaboard.com/forums/Thread-...plier-List

also check Supplier #2 for used machine



Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  [Equipment] resmed apap repair sleeper2460 4 514 11-24-2023, 11:58 AM
Last Post: Nightynite
Money [CPAP] Repair Z1 or purchase Pilot-24 Lite Battery CJH1968 3 595 08-13-2023, 08:10 AM
Last Post: sauerkraut
  Internal cpap repair parts mzipp 8 5,585 08-10-2023, 05:29 PM
Last Post: sms832
  Resmed BiPAP repair company in U.S? 17WRX 3 710 05-13-2023, 04:57 PM
Last Post: srlevine1
  [Equipment] Airfit P10 Repair JJJ 3 1,280 10-28-2022, 03:35 PM
Last Post: JungleJim
  Do it yourself REPAIR forum AC Hunter 1 917 09-14-2022, 09:28 PM
Last Post: snorin2
  [Equipment] Resmed ClimateLine repair? jeffparker 8 895 08-16-2022, 12:00 PM
Last Post: OpalRose


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.