Post Reply 
[Equipment] ResMed S9 AutoSet™ CPAP Machine with H5i™
Author Message
Morbius Offline

Members

Posts: 4
Joined: Aug 2014

Machine: ResMed S9 AutoSet™ CPAP Machine with H5i™
Mask Type: Full face mask
Mask Make & Model: ResMed Mirage Liberty ™ Full Face Mask
Humidifier: ResMed S9 AutoSet™ CPAP Machine with H5i™
CPAP Pressure: 4-8
CPAP Software: ResScan SleepyHead Other Software

Other Comments:

Sex: Male
Location:

Post: #1
Question ResMed S9 AutoSet™ CPAP Machine with H5i™
Information needed on how to view the following on my machine:
ResMed S9 AutoSet™ CPAP Machine with H5i™
1- BID
2- VID
3- RID
4- HID

Thank You!
09-20-2014 11:53 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
vsheline Offline

Advisory Members

Posts: 1,908
Joined: Jul 2012

Machine: S9 VPAP Adapt (USA Model# 36007, not better 36037 or 36067)
Mask Type: Full face mask
Mask Make & Model: F10 or SimPlus w/ 2Liners. MirageQuatro & Gecko gel pad
Humidifier: H5i
CPAP Pressure: 15 EPAP, PS 5-10
CPAP Software: ResScan

Other Comments: Marfan Syndrome, chronic bradycardia, occasional Cheyne-Stokes Respiration

Sex: Male
Location: California, USA

Post: #2
RE: ResMed S9 AutoSet™ CPAP Machine with H5i™
(09-20-2014 11:53 PM)Morbius Wrote:  Information needed on how to view the following on my machine:
ResMed S9 AutoSet™ CPAP Machine with H5i™
1- BID
2- VID
3- RID
4- HID

Thank You!

Hi Morbius,

The Clinician setup manual for that machine would say how to view those numbers. Members can request a Clinician set-up manual by email. Info on how to request the set-up manual is given in one of the threads in the Important Threads section at the top of the forum.

Those numbers are viewable from within the machine's sooper sekret Clinician menu.

You enter this menu by holding down simultaneously two buttons for about 4 seconds - the rectangular button with the two check marks and the tall round select knob.

Membership in the Advisory Member group should not be understood as in any way implying medical expertise or qualification for advising Sleep Apnea patients concerning their treatment. The Advisory Member group provides advice and suggestions to Apnea Board administrators and staff on matters concerning Apnea Board operation and administrative policies - not on matters concerning treatment for Sleep Apnea. I think it is now too late to change the name of the group but I think Voting Member group would perhaps have been a more descriptive name for the group.
(This post was last modified: 09-21-2014 12:20 AM by vsheline.)
09-21-2014 12:15 AM
Find all posts by this user Post Reply Quote this message in a reply
zonk Offline

Advisory Members

Posts: 7,908
Joined: Feb 2012

Machine: A10 AutoSet
Mask Type: Nasal mask
Mask Make & Model: Activa LT
Humidifier: Integrated /ClimateLineAir
CPAP Pressure: 9/13
CPAP Software: ResScan

Other Comments: CPAP since Nov 2010

Sex: Male
Location: Australia

Post: #3
RE: ResMed S9 AutoSet™ CPAP Machine with H5i™
Service
Displays the device run hours, software version and other component versions.
[Image: s9-pic2.jpg]

http://www.apneaboard.com/resmed-s9-cpap-setup

Run hours
Displays the total number of hours the device has been used including warm-up and cool-down times for the humidifier.
It is not affected by the period selected. This is the only data item that is not reset when data is erased.

SW : Displays the current software version.
BID : Displays the boot loader ID.
VID : Displays the variant ID.
RID : Displays the regional variant ID.
HID : Displays the humidifier software ID.
[HID display when you connect the H5i]

[Edit: In the older S9, the software version is the ONLY information shown on "Service" screen]
(This post was last modified: 09-21-2014 02:49 AM by zonk.)
09-21-2014 02:11 AM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
Evpraxia Offline

Advisory Members

Posts: 313
Joined: Aug 2014

Machine: ResMed S9 AutoSet
Mask Type: Nasal pillows
Mask Make & Model: ResMed Swift LT for Her - Nasal Pillows System
Humidifier: ResMed H5i
CPAP Pressure: 7-17
CPAP Software: ResScan SleepyHead

Other Comments: Cat Staff, bibliophile, love Classical & Byzantine music

Sex: Female
Location: Pacific Northwest USA

Post: #4
RE: ResMed S9 AutoSet™ CPAP Machine with H5i™
(09-21-2014 02:11 AM)zonk Wrote:  Service
Displays the device run hours, software version and other component versions.
[Image: s9-pic2.jpg]

http://www.apneaboard.com/resmed-s9-cpap-setup

Run hours
Displays the total number of hours the device has been used including warm-up and cool-down times for the humidifier.
It is not affected by the period selected. This is the only data item that is not reset when data is erased.

SW : Displays the current software version.
BID : Displays the boot loader ID.
VID : Displays the variant ID.
RID : Displays the regional variant ID.
HID : Displays the humidifier software ID.
[HID display when you connect the H5i]

[Edit: In the older S9, the software version is the ONLY information shown on "Service" screen]

I just got my ResMed on Saturday, 20 Sept and I am curious: what is the reason for needing this info?

Evpraxia in the Pacific Northwest USA
Diagnosed: 44 AHI when supine, O2 down to 82%
Treated since 20 Sept 2014:: 0.7 AHI, Settings 7-15, EPR on Full Time at Level 3
Better living through CPAP/APAP machines!
09-21-2014 07:43 PM
Find all posts by this user Post Reply Quote this message in a reply
zonk Offline

Advisory Members

Posts: 7,908
Joined: Feb 2012

Machine: A10 AutoSet
Mask Type: Nasal mask
Mask Make & Model: Activa LT
Humidifier: Integrated /ClimateLineAir
CPAP Pressure: 9/13
CPAP Software: ResScan

Other Comments: CPAP since Nov 2010

Sex: Male
Location: Australia

Post: #5
RE: ResMed S9 AutoSet™ CPAP Machine with H5i™
(09-21-2014 07:43 PM)Evpraxia Wrote:  I just got my ResMed on Saturday, 20 Sept and I am curious: what is the reason for needing this info?
No good reason other than curiosity and knowing you have the latest software version, but now the S9 been replaced by AirSense 10
I was taken by hype of the AirSense 10 and got AirSense 10 AutoSet, I liked some features of the A10 but going back to the S9 and the A10 destined to collect dust on the shelf in the wardrobe

My S9 software version 0602, does not have VID, BID, etc ... the newer ones 0907 or maybe still there is a later version
As far as I can tell, no significant changes, just different logo and enabling SmartStart to work with full face masks, beside ResMed does not tell us what they did or did not
09-21-2014 08:38 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
archangle Offline
Wiki Editor
Advisory Members

Posts: 3,159
Joined: Feb 2012

Machine: ResMed S9 AutoSet
Mask Type: Nasal pillows
Mask Make & Model: ResMed Swift FX
Humidifier: ResMed S9 H5i
CPAP Pressure: 16-20
CPAP Software: ResScan SleepyHead EncoreBasic

Other Comments: Happy PAPper

Sex: Undisclosed
Location: USA

Post: #6
RE: ResMed S9 AutoSet™ CPAP Machine with H5i™
(09-21-2014 07:43 PM)Evpraxia Wrote:  I just got my ResMed on Saturday, 20 Sept and I am curious: what is the reason for needing this info?

It won't matter to most people.

It's mostly for the ResMed service personnel. For instance, if there was a defect or recall, it might only affect certain versions of the machine software.

You might also have certain improved or changed features on certain software versions. For instance early S9 machines wouldn't let you enable autostart if you had a full face mask. Later machines would allow you to do this. The version info might tell you whether it does this or not, if you know the numbers involved.

Get the free SleepyHead software here.
Useful links.
Click here for information on the main alternative to CPAP.
If it's midnight and a DME tells you it's dark outside, go and check it yourself.
09-21-2014 09:28 PM
Find all posts by this user Post Reply Quote this message in a reply
Evpraxia Offline

Advisory Members

Posts: 313
Joined: Aug 2014

Machine: ResMed S9 AutoSet
Mask Type: Nasal pillows
Mask Make & Model: ResMed Swift LT for Her - Nasal Pillows System
Humidifier: ResMed H5i
CPAP Pressure: 7-17
CPAP Software: ResScan SleepyHead

Other Comments: Cat Staff, bibliophile, love Classical & Byzantine music

Sex: Female
Location: Pacific Northwest USA

Post: #7
RE: ResMed S9 AutoSet™ CPAP Machine with H5i™
Ah, thanks all - now I get it. Should have before, I used to work in high tech as a project manager.

Evpraxia in the Pacific Northwest USA
Diagnosed: 44 AHI when supine, O2 down to 82%
Treated since 20 Sept 2014:: 0.7 AHI, Settings 7-15, EPR on Full Time at Level 3
Better living through CPAP/APAP machines!
09-21-2014 09:46 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Is this sound normal? - Resmed Airsense 10 Autoset Ronberta 8 1,272 11-29-2016 07:59 PM
Last Post: sonicboom
  Use CPAP machine to get a new baseline AHI? blueelement2016 5 351 11-12-2016 01:37 AM
Last Post: blueelement2016
  Is my ResMed S9 Autoset dying? gkainz 10 529 11-09-2016 11:35 AM
Last Post: gkainz
  [Equipment] Resmed S10 Autoset Humidifier question keithb4158 6 395 11-02-2016 05:13 AM
Last Post: keithb4158
Question A10 autoset in CPAP mode- all data recorded? PreciousRoy 3 250 10-31-2016 04:25 PM
Last Post: trish6hundred
  Resmed Airsense 10 CPAP data versus Resmed Airsense 10 Autoset data David P. 4 546 10-29-2016 08:42 PM
Last Post: trish6hundred
  New CPAP Machine cerenkov 3 309 10-28-2016 08:43 PM
Last Post: cerenkov

Forum Jump:

Who's Online (Complete List)