01-08-2017, 11:01 AM
(This post was last modified: 01-08-2017, 11:06 AM by under pressure.)
I've had an Airsense 10 Autoset from their first introduction a few years ago. Maybe about six months in ResMed issued an over the air software update to correct an issue with the humidifier system. I actually noticed the software update in progress one night after I had pushed the start/stop button to end therapy and take a rest room break. It was still dark outside and I noticed the screen on the machine was at full brightness and was basically illuminating the room so I looked at the screen to see what was going on and found that the machine was in the process of doing an over the air software update. The update only took a couple minutes and I went into the "about" menu on the machine at which time I noticed that the software for the humidifier was now a newer software version number.
So yes the machines does update "over the air" thru the cellular network connection and this will occour after ending a therapy session so as not to interrupt your sleep/therapy session. I have also read somewhere that a DME might be able to place a software update on your SD card if you are unable to receive over the air updates for any reason such as no cellular coverage, as an example.
However my machine has never received a firmware update since it was new back in 2014 when they first came out, I am still running the original machine firmware (SX567-0205). So apparently ResMed has not felt it necessary to update the machine firmware even though later models of the Autoset models are running newer software versions that include the ability to detect and report RERA events, which mine does not do. So the only over the air updates I have received over the almost three year life of my machine has been the humidifier update and that was because of a known/identified issue with the system.
By the way I purchased my machine from a vendor with no DME support and never registered or used the My Air thing, so I got the humidifier update in March of 2015 regardless of the machine not being DME supported or registered with ResMed.
01-08-2017, 11:52 AM
(This post was last modified: 01-08-2017, 11:52 AM by sonicboom.)
If the wireless is turned on on your machine it will communicate with ResMed regardless of whether you've registered for My Air or with a DME. I just leave it on because I simply don't care who looks at my graphs. If someone out there in snooping land wants to look at my detailed data or AHI have at it.
01-09-2017, 01:56 AM
(This post was last modified: 01-09-2017, 01:56 AM by sonicboom.)
As far as I know registering with MyAir is optional and others have received updates in the past without being on MyAir. Therefore, it cannot be a requirement.
Has anybody received a firmware update recently, on a new machine?
From what I have read, it looks like some updates were pushed when the Airsense 10 model was new, 2 years ago, probably to fix some initial bugs.
I just got a new A10 Auto for Her last week. Fyi - My sw version is SX567-0306 and the manufactured date is 2016. My SN begins with 2316...