Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

[Equipment] Sleep Report on ResMed AirCurve 10 S
#1
Sleep Report on ResMed AirCurve 10 S
My ResMed AirCurve 10 S would shut down after about 30 mins of usage and I reset my machine thru the Settings menu which resolved the problem. However now, my Sleep Report is not fully displayed on the device and the Events/hour is only viewable online at myair.resmed.com


Any suggestions? I tried removing and re-inserting the SD card, however, the problem persists. The SD card is not defective when checked on my laptop.

Thanks
Alex

   
   
Post Reply Post Reply






Donate to Apnea Board  
#2
RE: Sleep Report on ResMed AirCurve 10 S
Go into the clinical menu and find essentials in the options menu and change its setting from on to plus

That should give you an enhanced sleep report
Post Reply Post Reply
#3
RE: Sleep Report on ResMed AirCurve 10 S
(01-25-2020, 01:39 AM)jaswilliams Wrote: Go into the clinical menu and find essentials in the options menu and change its setting from on to plus

That should give you an enhanced sleep report

Thank you, I just discovered that this morning.

Regarding the earlier issue of my machine shutting down after about 30 mins, and now functioning after a reset, any thoughts on this?

Thanks
Alex
Post Reply Post Reply
#4
RE: Sleep Report on ResMed AirCurve 10 S
I wonder if auto stop/start was enabled and your leaks were excessive and the machine thought you no longer had the mask on so turned it’s self off. If you have a PC and an SD card in your Aircurve then I recommend you download OSCAR details in my signature with the detailed graphs it may give us a clue why your machine turned off without that information we would just be guessing
Post Reply Post Reply






Donate to Apnea Board  
#5
RE: Sleep Report on ResMed AirCurve 10 S
(01-25-2020, 02:07 PM)jaswilliams Wrote: I wonder if auto stop/start was enabled and your leaks were excessive and the machine thought you no longer had the mask on so turned it’s self off. If you have a PC and an SD card in your Aircurve then I recommend you download OSCAR details in my signature with the detailed graphs it may give us a clue why your machine turned off without that information we would just be guessing

This was the first suggestion from my Aerocare consultant. Yes Auto start was on and I retried after turning it off. On this try, the CPAP shutdown as earlier in about 30 mins. I have downloaded OSCAR and will try diagnosing the information on the shutdown days. 

Its working fine after resetting the CPAP to factory defaults, and I have adjusted the pressure, however, I am not sure if any other settings need to be adjusted. My AHI was 5.6 so things seem to be good. 

Again thank you so much for your support.

Alex
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Resmed Aircurve ASV vs Phillips Drean ST autoSV H/C DS raylock1 18 316 03-30-2020, 07:22 PM
Last Post: SarcasticDave94
  my Aircurve 10 ASV sounds like a calf looking for its mother Cow! oldfart59 18 629 03-28-2020, 03:10 PM
Last Post: 3rdMarDiv
  Aircurve 10 Change the modem number called Feedsack 3 272 03-26-2020, 10:18 AM
Last Post: geauxdbl
  help with resmed aircurve 10 asv settings pugster 3 150 03-20-2020, 09:03 AM
Last Post: Sleeprider
  [Equipment] Aircurve 10 VAuto dead help! otis53 3 129 03-14-2020, 10:12 PM
Last Post: Sleeprider
  New ResMed Aircurve V10 Auto jeffdanger 21 670 03-05-2020, 08:46 AM
Last Post: Sleeprider
  Reliability of Resmed Aircurve Vauto Mal777 6 197 03-05-2020, 04:12 AM
Last Post: DeepBreathing


New Posts   Today's Posts






About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.