I have attached some photos and I was really hoping that someone that has used the same gear can identify if my headgear will attach to the business end of their hose. I can't use my hose because it's for a DreamStation and the plug (machine) end is diiferent to the F&P connector, so it will just have to be the headgear and mask.
Images 1-5 are the ResMed and F&P hoses and attachments. Apparently the grey hose is the F&P one that connects to the machine, and the white or clear one connects to the grey one on one end, and to the ResMed headgear on the other.
Images 6-7 are the hose connection point on the Philips Dreamwear headgear. That white sleeve comes off and I usually have it permanently inserted into the DS heated hose as it's easier to detach the headgear that way rather than pulling it off with the sleeve still attached.
I noticed the ResMed has a sort of elbow-joint section that has exhaust holes (or vents or whatever they're actually called), but it's not too clear from the images if that section can be removed from the hose behind it. I would need my headgear to go into the straight part of the hose, not into the elbow part because my elbow port already the vent holes and I imagine doubling up would be a bad thing.
I hope all this makes sense, I'm not great at describing things. Please let me know if you need any clarification. Thanks!