Post Reply 
F&P ICON AUTO+ CM MANUAL OUT OF DATE [updated - see post #7]
Author Message
chonorof Offline

New Members

Posts: 1
Joined: Mar 2014

Machine: ICON AUTO+
Mask Type: Nasal pillows
Mask Make & Model: CPAP PRO
Humidifier: INTERNAL
CPAP Pressure: 18 cmH20
CPAP Software: SleepyHead

Other Comments:

Sex: Male
Location:

Post: #1
F&P ICON AUTO+ CM MANUAL OUT OF DATE [updated - see post #7]
The Manual that I received as the clinician manual is out of date.

It is a ICON AUTO+®

One thing that I'm not too happy about is that they no longer include the SmartStick Studio CD with the machine. Yes there are 4 "lame" songs in the machine... No thanks.

The open procedure is incorrect. I fiddled around with it and found that if you follow the same procedure as in the manual except to change it this way -

While rotating the wheel, turn it until the menu changes and the pointer will jump to 12:00 (nowhere near 360°), and then go back one click and the wrench will appear. This is now the Clinician Menu.

The functions are the same just look at the icons.

My Machine (received it on 2/27/2014) is V3.0. So it looks like there have been a few updates!

Good Luck.

Sleep-well
03-01-2014 12:57 AM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
zonk Offline

Advisory Members

Posts: 7,908
Joined: Feb 2012

Machine: A10 AutoSet
Mask Type: Nasal mask
Mask Make & Model: Activa LT
Humidifier: Integrated /ClimateLineAir
CPAP Pressure: 9/13
CPAP Software: ResScan

Other Comments: CPAP since Nov 2010

Sex: Male
Location: Australia

Post: #2
RE: F&P ICON AUTO+ CM MANUAL OUT OF DATE
(03-01-2014 12:57 AM)chonorof Wrote:  The Manual that I received as the clinician manual is out of date.

It is a ICON AUTO+®

One thing that I'm not too happy about is that they no longer include the SmartStick Studio CD with the machine. Yes there are 4 "lame" songs in the machine... No thanks.

The open procedure is incorrect. I fiddled around with it and found that if you follow the same procedure as in the manual except to change it this way -

While rotating the wheel, turn it until the menu changes and the pointer will jump to 12:00 (nowhere near 360°), and then go back one click and the wrench will appear. This is now the Clinician Menu.

The functions are the same just look at the icons.

My Machine (received it on 2/27/2014) is V3.0. So it looks like there have been a few updates!

Good Luck.

Sleep-well
Hi chonorof, welcome aboard
Not sure what else changed beside the black color
http://www.fphcare.com/sleep-apnea/cpap-devices/f-p-icon/

Anyone have the setup manual, please send it to admin so can be added to the list and helping others Coffee
http://www.apneaboard.com/adjust-cpap-pr...tup-manual
03-01-2014 02:15 AM
Find all posts by this user Post Reply Quote this message in a reply
PaulaO2 Offline
Wiki Editor
Moderators

Posts: 8,068
Joined: Feb 2012

Machine: S9 Autoset
Mask Type: Full face mask
Mask Make & Model: F&P Simplus
Humidifier: H5i
CPAP Pressure: 14-20
CPAP Software: SleepyHead

Other Comments: Ehlers-Danlos Syndrome, Hypermobility Type; chronic sarcasm

Sex: Undisclosed
Location: western NC, USA

Post: #3
RE: F&P ICON AUTO+ CM MANUAL OUT OF DATE
The instructions found here are correct, if I am reading yours right.

Quote:Fisher & Paykel ICON Auto, Premo & Novo: Start from the 12 o'clock position of the Home Screen. Press and hold the button in the middle of the SmartDial, and use your other hand to turn the SmartDial in a clockwise direction until you return to the 12 o'clock postion. Do not release the Smart Dial button while turning. Turn the SmartDial back (counter clockwise) one position while still holding down the button and the settings in the Clinician Menu will appear. You can now release the SmartDial button. NOTE: The Clinician Menu will default back to the Patient Menu after 30 seconds, or if the unit is turned off at the power supply. You can manually exit the Clinician Menu by repeating the instructions to enter the menu.

And of course the manual you requested is incorrect because it is not for the model you have.

Quote:Fisher & Paykel ICON Auto, ICON Premo & ICON Novo (combined manual)

But now we know there is a new model available and can ask and look for that manual. Thank you for letting us know!

PaulaO2
Apnea Board Moderator
www.ApneaBoard.com


Breathe deeply and count to zen.

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
03-01-2014 02:55 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
trish6hundred Offline

Advisory Members

Posts: 6,453
Joined: May 2012

Machine: Resmed S9 AutoSet for Her
Mask Type: Full face mask
Mask Make & Model: Fisher & Paykel Simplus
Humidifier: H5i Heated Humidifier
CPAP Pressure: 10 - 7-20 Cm H2O
CPAP Software: Not using software

Other Comments: I started CPAP in 2008. Totally blind since birth.

Sex: Female
Location: Missouri, USA

Post: #4
RE: F&P ICON AUTO+ CM MANUAL OUT OF DATE
Hi chonorof,
WELCOME! to the forum.!
Best of luck to you.

trish6hundred
03-01-2014 03:31 PM
Find all posts by this user Post Reply Quote this message in a reply
woozie38 Offline

Advisory Members

Posts: 248
Joined: Jan 2013

Machine: Fisher & Paykel Icon + Auto
Mask Type: Full face mask
Mask Make & Model: F&P Simplus
Humidifier: Integral
CPAP Pressure: 8 to 14
CPAP Software: SleepyHead Other Software

Other Comments: 17 years of CPAP + supp. oxygen @ 3 L/min

Sex: Male
Location: Toowoomba, Queensland Australia

Post: #5
RE: F&P ICON AUTO+ CM MANUAL OUT OF DATE
My new Icon came 05/20/14 with the updated user manual. If anybody would like a copy, pleaseSmile PM me.

[Image: signature.png]Keep on breathin'
05-21-2014 10:27 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
SuperSleeper Offline

Administrators

Posts: 9,976
Joined: Feb 2012

Machine: PR System One REMstar Auto (DS560)
Mask Type: Nasal pillows
Mask Make & Model: ResMed Mirage Swift II
Humidifier: none
CPAP Pressure: 12.5 - 18.5 cmH20 (auto range)
CPAP Software: SleepyHead

Other Comments: Have diabetes Type II

Sex: Male
Location: Illinois, USA

Post: #6
RE: F&P ICON AUTO+ CM MANUAL OUT OF DATE
(05-21-2014 10:27 PM)woozie38 Wrote:  My new Icon came 05/20/14 with the updated user manual. If anybody would like a copy, pleaseSmile PM me.

What is needed is the Clinician (Provider) Setup Manual or Setup Guide. The user manual doesn't provide instructions for entering the Clinician or Provider Mode in order to change pressures.

We now have a basic Setup Guide (not a full Provider Manual) for the new Icon+ series machines (ICON+ Auto, ICON+ Premo, & ICON+ Novo). It's a one-page PDF that has very basic instructions for getting into and navigating the Provider options.

If you need the Setup Guide for the ICON+ series of machines, please follow the email request directions in Section Three of this page:

http://www.apneaboard.com/adjust-cpap-pr...tup-manual


Coffee

SuperSleeper
Apnea Board Administrator
www.ApneaBoard.com


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.

05-21-2014 11:11 PM
Find all posts by this user Post Reply Quote this message in a reply
SuperSleeper Offline

Administrators

Posts: 9,976
Joined: Feb 2012

Machine: PR System One REMstar Auto (DS560)
Mask Type: Nasal pillows
Mask Make & Model: ResMed Mirage Swift II
Humidifier: none
CPAP Pressure: 12.5 - 18.5 cmH20 (auto range)
CPAP Software: SleepyHead

Other Comments: Have diabetes Type II

Sex: Male
Location: Illinois, USA

Post: #7
RE: F&P ICON AUTO+ CM MANUAL OUT OF DATE
Our CPAP Setup Manuals Page has now been updated with the basic Setup Guide for this new series of ICON+ machines. See THIS POST for more info.

Again, if anyone has a copy of the full Clinician Manual, please email it to me at apneaboard@gmail.com

Thanks

SuperSleeper
Apnea Board Administrator
www.ApneaBoard.com


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.

05-21-2014 11:38 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
woozie38 Offline

Advisory Members

Posts: 248
Joined: Jan 2013

Machine: Fisher & Paykel Icon + Auto
Mask Type: Full face mask
Mask Make & Model: F&P Simplus
Humidifier: Integral
CPAP Pressure: 8 to 14
CPAP Software: SleepyHead Other Software

Other Comments: 17 years of CPAP + supp. oxygen @ 3 L/min

Sex: Male
Location: Toowoomba, Queensland Australia

Post: #8
RE: F&P ICON AUTO+ CM MANUAL OUT OF DATE [updated - see post #7]
As far as I'm aware there is no clinicians manual available for Icon+, but there is a providers guide, This is a single page with instruction and diagrams of how to set your min & max pressures etc. If wanted I can scan
it to a jpg image. PM me to let me know.
05-22-2014 05:14 PM
Find all posts by this user Post Reply Quote this message in a reply
SuperSleeper Offline

Administrators

Posts: 9,976
Joined: Feb 2012

Machine: PR System One REMstar Auto (DS560)
Mask Type: Nasal pillows
Mask Make & Model: ResMed Mirage Swift II
Humidifier: none
CPAP Pressure: 12.5 - 18.5 cmH20 (auto range)
CPAP Software: SleepyHead

Other Comments: Have diabetes Type II

Sex: Male
Location: Illinois, USA

Post: #9
RE: F&P ICON AUTO+ CM MANUAL OUT OF DATE [updated - see post #7]
(05-22-2014 05:14 PM)woozie38 Wrote:  As far as I'm aware there is no clinicians manual available for Icon+, but there is a providers guide, This is a single page with instruction and diagrams of how to set your min & max pressures etc. If wanted I can scan
it to a jpg image. PM me to let me know.

Thanks. We already have the one-page PDF Provider Setup Guide for the ICON+ series of machines, and it's now listed on our Clinician Manuals Page.

If you or anyone else ever locates the full Clinician Manual (multi-page) please send it to me at apneaboard@gmail.com.

Thanks. Coffee

SuperSleeper
Apnea Board Administrator
www.ApneaBoard.com


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.

05-22-2014 08:36 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
Arrow Your Personal CPAP Success Story - Post Here SuperSleeper 726 208,271 12-08-2016 07:37 AM
Last Post: Gabby
  post a picture worthog 3 168 12-02-2016 07:59 PM
Last Post: pupcamper
  manual ramping? longfoot 3 149 11-26-2016 08:19 PM
Last Post: trish6hundred
  ResMed Airsense 10 Setting Date Problem Reuven Gruber 6 303 11-16-2016 04:13 PM
Last Post: Sleeprider
  General rule for tweaking pressure - first post MartinT 7 397 11-15-2016 11:59 PM
Last Post: MartinT
  How do I post Sleepyhead Info? Saskie 8 250 11-11-2016 11:30 PM
Last Post: trish6hundred
  Icon+ Won't Write to USB Arend 2 188 11-05-2016 02:32 AM
Last Post: PsychoMike

Forum Jump:

Who's Online (Complete List)