Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

First machine!! Just arrived, setup help please.
#1
Good Morning from California,

Soooo, i just received my machine that i purchase a few days ago and my apt for the setup is still two days away. I was wondering if anyone here can help me set it up with my prescription or should i wait, and if so where can i post for that help. In the meant time i will write down what my prescription says as i am new to all these terms so if i'm missing anything then please let me know.

Machine: PR series one DS760P

Prescription says: Auto Bipap Min EPAP15omH20, PS 5omH20, Max IPAP 25omH20
heated humidifier
cpap tubbing

RDI:83.5
CmH20 20/15
Ramp 15omH20
Total Respiratory Events 442

Thank you again for any help in advance
Post Reply Post Reply
#2
Go to:
http://www.apneaboard.com/forums/Thread-...P-Pressure

There, you can read how to get the instructions to set up your machine. Once you have those, let us know if you have any difficulties.
                                                                                                                                                                                  
Please organize your SleeyHead screenshots like this.
I'm an epidemiologist, not a medical provider. 
Post Reply Post Reply
#3
SJGino, the answer is really simple. First, let's be sure your SD card is clean by formatting it to FAT 32, or just delete everything on it.

Second, make sure the machine therapy data is cleared. To do this, we will go into the provider mode. This link describes how to enter provider mode: http://www.apneaboard.com/pr-system-one-...structions Rotate the control knob until the Setup is highlighted on the screen. Press the control knob and ramp button at the same time until you hear the beep. Now, you can go to the Info screen, (press the control knob to enter) and scroll down to therapy data; press control knob again, and select delete. You can do the same for therapy hours. Now, scroll back up and exit to the main menu and go back to Setup and select. Now scroll down to the EPAPmin and select 15. Now scroll to PS min and select 5.0, enter. Scroll to PS max and enter 5.0 and enter. Scroll to IPAP max and select 25.

If you provided prescription information to SecondwindCPAP, then these values may already be entered. Note that your machine has automatic PS adjustment. You might want to try a PSmin of 3 and PSmax of 5, but we can always go there later as you start to optimize. Good luck!

Editing to add, you need to go through the Therapy menu and make sure any compliance and efficacy data is reset as well. Once you are in the provider menu, it is all pretty obvious. You don't want to leave any records of the previous user, just in case they were not cleared by the seller. I think they do this for you.
Post Reply Post Reply


#4
Thank you ,

i'll be trying to figure this out tonight and see how i do. Thanks again

SD card is formatted and clean.
Post Reply Post Reply
#5
Hi SJGino,
WELCOME! to the forum.!
It's GREAT to hear that you got your machine and I hope you like it.
I wish you good luck as you start your CPAP therapy.
trish6hundred
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  [Admin Note] WANTED: CLINICIAN SETUP MANUAL for 60-series PR System One REMstar Plus w/ C-Flex SuperSleeper 1 78 08-17-2017, 07:11 PM
Last Post: Galactus
Exclaimation CPAP Machine Choices - read this before you accept a new machine SuperSleeper 28 17,064 08-04-2017, 04:10 PM
Last Post: Sleeprider
  [Pressure] RESmart CPAP - Entering Setup Kevin5050 3 184 07-25-2017, 07:28 PM
Last Post: trish6hundred
  Air Mini has Arrived..... Matzaball2016 11 1,413 07-12-2017, 05:46 PM
Last Post: Full Score
  Battery setup Jrw1 13 559 06-27-2017, 08:49 AM
Last Post: Jrw1
  Pin from power plug stuck in machine ResMed cpap machine B10576 11 627 06-05-2017, 09:04 PM
Last Post: CB91710
  machine died! Now new doctor and new machine Bjazzman 13 932 05-04-2017, 10:03 PM
Last Post: Sleeprider

Forum Jump:

New Posts   Today's Posts




About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.

For any more information, please use our contact form.