Hello Guest,
Welcome to Apnea Board !
/
Fisher and Paykel Icon+ Not working on battery
|
Fisher and Paykel Icon+ Not working on battery
|
prepchef
Posts: 1 Threads: 1 Joined: Aug 2014
Machine: Fisher and Paykel Icon+
08-07-2014, 12:22 AM
Fisher and Paykel Icon+ Not working on battery
I have been using a deep cycle battery and inverter for years. All of a sudden my machine is not "lighting up". I have changed batteries and inverters and even used a friends set up. Still it wont light up. Anyone have any suggestions? Help!
zonk
Posts: 8,023 Threads: 243 Joined: Feb 2012
Machine: A10 AutoSet
08-07-2014, 03:26 PM
RE: Fisher and Paykel Icon+ Not working on battery
 Check with Fisher and Paykel, they should be able to tell you what you need Welcome to the forum
Terry
Posts: 558 Threads: 21 Joined: May 2014
Machine: Philips Respironics RemStar Auto with A-Flex (560P)
08-07-2014, 03:39 PM
RE: Fisher and Paykel Icon+ Not working on battery
(08-07-2014, 12:22 AM)prepchef Wrote: I have been using a deep cycle battery and inverter for years. All of a sudden my machine is not "lighting up". I have changed batteries and inverters and even used a friends set up. Still it wont light up. Anyone have any suggestions? Help! Does it work if you plug it into a normal wall outlet?
woozie38
Posts: 279 Threads: 11 Joined: Jan 2013
Machine: Resmed S9 Adapt SV
08-14-2014, 05:22 PM
RE: Fisher and Paykel Icon+ Not working on battery
Some devices will operate on a modified sine wave inverter, & some won't but require a pure sine wave inverter. The problem is caused by the step down transformer inside the device & a lot of technical other stuff. Either that or your Icon has a problem in its power supply.
![[Image: signature.png]](http://quilt-affair.com.au/images/signature.png) Keep on breathin'
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| Fisher and Paykel Solo | Columbiabill | 30 | 4,479 |
04-13-2024, 08:35 AM Last Post: ButtonNoseBarbie |
|
| [Equipment] Battery power source for ResMed machine | MaskedOne | 8 | 156 |
04-12-2024, 04:42 PM Last Post: MaskedOne |
|
| Tech Nerds-think this battery setup will work for Transcend Micro? | johnbrain | 10 | 291 |
04-02-2024, 11:43 PM Last Post: johnbrain |
|
| battery backup recommendations as10/as11 | eok361 | 54 | 4,708 |
04-01-2024, 10:03 PM Last Post: Charliejoe |
|
| nore cpap is working, again ? | Jst617 | 5 | 183 |
03-31-2024, 07:10 PM Last Post: OpalRose |
|
| New Machine and settings not working | snapperzz | 3 | 147 |
03-26-2024, 02:10 AM Last Post: snapperzz |
|
| HDM Z1 Battery Replacement | Ephraim | 10 | 2,007 |
03-17-2024, 11:51 AM Last Post: breinersj |
|
/
Fisher and Paykel Icon+ Not working on battery
