FlashAir 3 Wireless Timeout

[ronsch00]

I apologize for asking this question but I spent a hour reviewing the posts in the forum and could not find a clear answer.

I have a FlashAir 3 card installed with the Flashair Drive and FlashAir Tools programs loaded on a Mac. The card is initiating the wireless network and I can transfer the data files from within Sleepyhead. My problem is that I cannot keep the wireless network on, it times out after use and I need to remove and re-insert the card the next time I want to transfer data.

I have read the FlashAir instructions and tried setting the FlashAir Startup Mode to Manual and reset the permissions on the image file. Unfortunately, in 'manual' mode the wireless does not start automatically. This matches the description in the user manual, which states 'when you turn on the camera with this photo unprotected, it is necessary to set it to protected and then set it to unprotected again to turn on the wireless LAN functionality.'.

Is there a simple way to keep the FlashAir wireless network activated as long as the CPAP machine does not lose power?

Thanks again

[DariaVader]

set the following in your config file for the card

APPAUTOTIME=0