Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

FlashAir Bandwidth Limitation
#1
FlashAir Bandwidth Limitation
I came across this tidbit of knowledge while playing with my FlashAir. The Toshiba FlashAir is limited to a 20Mhz maximum bandwidth. Some WiFi access points have the ability to adjust this size. The newer WiFi access points have a default of 40Mhz, with an option to enable 20/40 MHz coexistence. This option is located somewhere in the 2.4Ghz parameter section. Netgear has this parameter located in the Advanced->Advanced Setup->Wireless Settings. The FlashAir will either not connect or have connection problems if the bandwidth is set above 20Mhz.

What the bandwidth setting does:
The greater the bandwidth, sometimes listed as: "Channel Spectrum Width", can be used to control the channel width consumed by your link/device. Using a higher channel width will increase throughput. Using a lower channel width will allow an increased number of channels to be used (including more non-overlapping channels). Lowering channel width may also provide more robust links over long distances.

I hope this may help someone.
Crimson Nape
Apnea Board Moderator
www.ApneaBoard.com
___________________________________
Useful Links -or- When All Else Fails:
The Guide to Understanding OSCAR
OSCAR Chart Organization
Attaching Images and Files on Apnea Board
Apnea Helpful Tips

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#2
RE: FlashAir Bandwidth Limitation
Nice find. I have an 'old busted' wifi router. You must have the new hotness. Smile
Using FlashAir W-03 SD card in machine. You can download your data through wifi with FlashPAP or Sleep Master utilities.

I wanted to learn Binary so I enrolled in Binary 101. I seemed to have missed the first four courses. Big Grinnie

Stick it to the man, Download OSCAR and take back control of your data!

Thanks Ian. Like I didn't have enough Honey-Do projects to tackle. Mornincoffee
Post Reply Post Reply
#3
RE: FlashAir Bandwidth Limitation
Another thing I have noticed about connectivity with the wifi card in a Resmed A10 machine is related to the power saving function with the machine. If the machine is full power ON (green light on top) the wifi card has stronger connectivity then when the machine is in power saving mode but technically ON (no light ON on top).
Coffee

Happy Pappin'
Never Give In, Never Give Up




INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. 
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Flashair - Dreamstation -> Airsense 11 Autoset todivefor 14 738 02-28-2024, 07:22 PM
Last Post: Crimson Nape
  [split] FYSETC SD Wifi - Possible FlashAir Replacement Psikic 131 21,664 01-12-2024, 11:59 AM
Last Post: scowell
  FlashPAP - FlashAir WiFi SD card utility TiredToo 296 95,498 10-05-2023, 06:54 AM
Last Post: olddog27
  looking for FlashAir W-04 16GB SD_card image Dog Slobber 3 826 06-03-2023, 08:21 AM
Last Post: Dog Slobber
  Transfering FlashAir card to new machine. foxfire 1 511 04-30-2023, 10:21 AM
Last Post: Crimson Nape
  FlashAir card and changing SSID todivefor 12 1,156 03-28-2023, 07:12 PM
Last Post: todivefor
  Calculating flow limitation without OSCAR? zleeby 2 593 12-01-2022, 01:52 PM
Last Post: zleeby


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.