Post Reply 
FlashAir Problem?
Author Message
parkerdt Offline

Advisory Members

Posts: 256
Joined: May 2015

Machine: ResMed A10 AutoSet
Mask Type: Other
Mask Make & Model: WISP, Nuance
Humidifier: Climate Hose and included humidifier
CPAP Pressure: 9
CPAP Software: SleepyHead

Other Comments: I alternate between WISP and fabric Nuance - like both!

Sex: Male
Location: Mebane, NC

Post: #1
FlashAir Problem?
I have a FlashAir W-02 16gb card for my A10 Autoset. Normally it reads properly in station mode. Recently however, the card has not been findable by FlashPAP in the mornings when I go to download my data. I have to either remove and reinsert the card or power cycle the machine.

Anyone have a suggested fix for this?

Thanks,
Dave
07-20-2015 02:15 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
DariaVader Offline
Apnea Board Facebook Editor
Monitors

Posts: 1,815
Joined: Nov 2014

Machine: Resmed S9 AutoSet
Mask Type: Nasal pillows
Mask Make & Model: Airfit P10 for Her
Humidifier: H5i humidifier with ClimateLine heated hose
CPAP Pressure: 8-15
CPAP Software: SleepyHead

Other Comments: diabetes II, Thyroidectomized, Primary Immune Deficiency, and the list goes on :P

Sex: Female
Location: Oregon

Post: #2
RE: FlashAir Problem?
change the timeout value to 0. Think the default is 30000 or something

APPAUTOTIME=0

https://flashair-developers.com/en/documents/api/config/

هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه
Tongue Suck Technique for prevention of mouth breathing:
  • Place your tongue behind your front teeth on the roof of your mouth
  • let your tongue fill the space between the upper molars
  • gently suck to form a light vacuum
Practising during the day can help you to keep it at night

هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه
(This post was last modified: 07-20-2015 02:21 PM by DariaVader.)
07-20-2015 02:18 PM
Find all posts by this user Post Reply Quote this message in a reply
parkerdt Offline

Advisory Members

Posts: 256
Joined: May 2015

Machine: ResMed A10 AutoSet
Mask Type: Other
Mask Make & Model: WISP, Nuance
Humidifier: Climate Hose and included humidifier
CPAP Pressure: 9
CPAP Software: SleepyHead

Other Comments: I alternate between WISP and fabric Nuance - like both!

Sex: Male
Location: Mebane, NC

Post: #3
RE: FlashAir Problem?
(07-20-2015 02:18 PM)DariaVader Wrote:  change the timeout value to 0. Think the default is 30000 or something

APPAUTOTIME=0

https://flashair-developers.com/en/documents/api/config/

Thanks, I've tried that without success. Here's my config:

[Vendor]

CIPATH=/DCIM/100__TSB/FA000001.JPG
APPMODE=5
APPNAME=FlashAir
APPSSID=ParkerHome 2
APPNETWORKKEY=**********************************
VERSION=FA9CAW3AW3.00.00
CID=02544d535731364731d5d7737900f301
PRODUCT=FlashAir
VENDOR=TOSHIBA
MASTERCODE=1234567890AB
LOCK=1
FORMATSETMODE=1
APPINFO=0000000000000000
APPAUTOTIME=0
STA_RETRY_CT=0
NOISE_CANCEL=0

Dave
07-20-2015 02:55 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
DariaVader Offline
Apnea Board Facebook Editor
Monitors

Posts: 1,815
Joined: Nov 2014

Machine: Resmed S9 AutoSet
Mask Type: Nasal pillows
Mask Make & Model: Airfit P10 for Her
Humidifier: H5i humidifier with ClimateLine heated hose
CPAP Pressure: 8-15
CPAP Software: SleepyHead

Other Comments: diabetes II, Thyroidectomized, Primary Immune Deficiency, and the list goes on :P

Sex: Female
Location: Oregon

Post: #4
RE: FlashAir Problem?
I have the S9 Autoset. Perhaps it lacks some of the power saving "features" of the A10... As you know, the flashair gets power to be on from the device it is plugged into.


[Vendor]

CIPATH=/DCIM/100__TSB/FA000001.JPG
VERSION=F19BAW3AW2.00.03
CID=02544d535731364708dd306c7800e601
PRODUCT=FlashAir
VENDOR=TOSHIBA
APPNAME=flashair
WEBDAV=0
TIMEZONE=-28
APPSSID=DARIANET
APPNETWORKKEY=*********
APPMODE=5
APPAUTOTIME=0
DNSMODE=1
LOCK=1
UPLOAD=1

هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه
Tongue Suck Technique for prevention of mouth breathing:
  • Place your tongue behind your front teeth on the roof of your mouth
  • let your tongue fill the space between the upper molars
  • gently suck to form a light vacuum
Practising during the day can help you to keep it at night

هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه
07-20-2015 03:39 PM
Find all posts by this user Post Reply Quote this message in a reply
DariaVader Offline
Apnea Board Facebook Editor
Monitors

Posts: 1,815
Joined: Nov 2014

Machine: Resmed S9 AutoSet
Mask Type: Nasal pillows
Mask Make & Model: Airfit P10 for Her
Humidifier: H5i humidifier with ClimateLine heated hose
CPAP Pressure: 8-15
CPAP Software: SleepyHead

Other Comments: diabetes II, Thyroidectomized, Primary Immune Deficiency, and the list goes on :P

Sex: Female
Location: Oregon

Post: #5
RE: FlashAir Problem?
Something else to try....

https://sleep.tnet.com/resources/sleepmaster/zflashairfix Wrote:FlashAir Fix for Close Signal Issues

So my CPAP is about 4-1/2ft from the AP... like really close.

Over the weeks, I would not be able to communicate with it even though the AP was showing 60% signal.

After the course of a week or so, I tried a few things but most of the time, the best I could do was get to FlashAir to bounce off the AP (100% for a few seconds.. then gone.. repeat).

Thomas gave me a tip which is supposed to help when the FlashAir is too close to the AP...

Add to the CONFIG file on the FlashAir the following line:

NOISE_CANCEL=2

And that fixed my problem so far for more than 3 days straight.

I would imagine that most have their CPAP machines a bit further away from the AP that I do, so you might not need this "fix". But if you having the same problem, you might give it a try.

هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه
Tongue Suck Technique for prevention of mouth breathing:
  • Place your tongue behind your front teeth on the roof of your mouth
  • let your tongue fill the space between the upper molars
  • gently suck to form a light vacuum
Practising during the day can help you to keep it at night

هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه
(This post was last modified: 07-20-2015 04:02 PM by DariaVader.)
07-20-2015 04:01 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
parkerdt Offline

Advisory Members

Posts: 256
Joined: May 2015

Machine: ResMed A10 AutoSet
Mask Type: Other
Mask Make & Model: WISP, Nuance
Humidifier: Climate Hose and included humidifier
CPAP Pressure: 9
CPAP Software: SleepyHead

Other Comments: I alternate between WISP and fabric Nuance - like both!

Sex: Male
Location: Mebane, NC

Post: #6
RE: FlashAir Problem?
My AP is about 20 feet away through 2 walls, but can't hurt to try!

Thanks!
07-20-2015 04:46 PM
Find all posts by this user Post Reply Quote this message in a reply
DariaVader Offline
Apnea Board Facebook Editor
Monitors

Posts: 1,815
Joined: Nov 2014

Machine: Resmed S9 AutoSet
Mask Type: Nasal pillows
Mask Make & Model: Airfit P10 for Her
Humidifier: H5i humidifier with ClimateLine heated hose
CPAP Pressure: 8-15
CPAP Software: SleepyHead

Other Comments: diabetes II, Thyroidectomized, Primary Immune Deficiency, and the list goes on :P

Sex: Female
Location: Oregon

Post: #7
RE: FlashAir Problem?
I think it is more likely that the A10 is "green" and is not powering the flashair sufficiently to keep it online, but idk. Not likely to be "noise" at that distance, IMO. This might be the first time I am happy I got the older S9 rather than the A10 Big Grin

هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه
Tongue Suck Technique for prevention of mouth breathing:
  • Place your tongue behind your front teeth on the roof of your mouth
  • let your tongue fill the space between the upper molars
  • gently suck to form a light vacuum
Practising during the day can help you to keep it at night

هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه
07-20-2015 05:03 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
parkerdt Offline

Advisory Members

Posts: 256
Joined: May 2015

Machine: ResMed A10 AutoSet
Mask Type: Other
Mask Make & Model: WISP, Nuance
Humidifier: Climate Hose and included humidifier
CPAP Pressure: 9
CPAP Software: SleepyHead

Other Comments: I alternate between WISP and fabric Nuance - like both!

Sex: Male
Location: Mebane, NC

Post: #8
RE: FlashAir Problem?
I don't know - seems to stay up during the day - I've been hitting it with FlashPAP off and on to see if it has gone away; it has not, and I know my A10 is in powersaving mode.

We'll see what happens in the AM!

Thanks again,
Dave
07-20-2015 05:16 PM
Find all posts by this user Post Reply Quote this message in a reply
AlanE Offline

Advisory Members

Posts: 1,491
Joined: Mar 2015

Machine: ResMed AirSense 10 Autoset
Mask Type: Nasal pillows
Mask Make & Model: P10 & Mirage Liberty backup
Humidifier: Built-in
CPAP Pressure: 10-14
CPAP Software: ResScan SleepyHead

Other Comments: ʕ•ᴥ•ʔ So Long, and Thanks for All the Fish

Sex: Male
Location: Southwest Florida

Post: #9
RE: FlashAir Problem?
I occasionally have that issue after I stop using the machine and try to download the data. There is no rhythm or reason for it and it doesn't happen every day. I do notice that when I have a power failure (however brief) I have to reinsert the card to connect it with the network again. Do you have your router set to cycle off/on during the night?



Using FlashAir W-03 SD card in machine. Access through wifi with FlashPAP or Sleep Master utilities.

I wanted to learn Binary so I enrolled in Binary 101. I seemed to have missed the first four courses. Big Grinnie
(This post was last modified: 07-20-2015 06:01 PM by AlanE.)
07-20-2015 06:00 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
parkerdt Offline

Advisory Members

Posts: 256
Joined: May 2015

Machine: ResMed A10 AutoSet
Mask Type: Other
Mask Make & Model: WISP, Nuance
Humidifier: Climate Hose and included humidifier
CPAP Pressure: 9
CPAP Software: SleepyHead

Other Comments: I alternate between WISP and fabric Nuance - like both!

Sex: Male
Location: Mebane, NC

Post: #10
RE: FlashAir Problem?
No, my router and CPAP are both on UPS supplies, actually. Enough to ride out any outage of an hour and a half or less.
07-20-2015 07:42 PM
Find all posts by this user Post Reply Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Problem with DreamWear Mask Judy1843 5 243 11-30-2016 04:03 AM
Last Post: holden4th
  New User Problem with BiPAP AVAPS - Part 1 jmayer180 35 1,231 11-27-2016 09:50 AM
Last Post: jmayer180
  Totally Confused by Airsense 10 Data - Centrals - Problem machine... ? mymontreal 20 964 11-20-2016 08:07 AM
Last Post: Rcgop
  ResMed Airsense 10 Setting Date Problem Reuven Gruber 6 281 11-16-2016 04:13 PM
Last Post: Sleeprider
  [CPAP] ResMed Air Sense 10 Auto Off Problem Buddie43 16 3,204 11-12-2016 02:51 PM
Last Post: sonicboom
Gross RERA Problem SideSleeper 24 981 11-02-2016 04:11 AM
Last Post: holden4th
  [Pressure] Problem exhaling unofon 18 817 10-24-2016 02:55 PM
Last Post: BadGoodDeb

Forum Jump:

Who's Online (Complete List)