Anyone have a suggested fix for this?
Thanks,
Dave
Hello Guest,
Welcome to Apnea Board !
FlashAir Problem?
|
07-20-2015, 02:15 PM
FlashAir Problem?
I have a FlashAir W-02 16gb card for my A10 Autoset. Normally it reads properly in station mode. Recently however, the card has not been findable by FlashPAP in the mornings when I go to download my data. I have to either remove and reinsert the card or power cycle the machine.
Anyone have a suggested fix for this? Thanks, Dave
07-20-2015, 02:18 PM
(This post was last modified: 07-20-2015, 02:21 PM by DariaVader.)
RE: FlashAir Problem?
change the timeout value to 0. Think the default is 30000 or something
APPAUTOTIME=0 https://flashair-developers.com/en/docum...pi/config/
هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه
Tongue Suck Technique for prevention of mouth breathing:
Practising during the day can help you to keep it at night هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه
07-20-2015, 02:55 PM
RE: FlashAir Problem?
(07-20-2015, 02:18 PM)DariaVader Wrote: change the timeout value to 0. Think the default is 30000 or something Thanks, I've tried that without success. Here's my config: [Vendor] CIPATH=/DCIM/100__TSB/FA000001.JPG APPMODE=5 APPNAME=FlashAir APPSSID=ParkerHome 2 APPNETWORKKEY=********************************** VERSION=FA9CAW3AW3.00.00 CID=02544d535731364731d5d7737900f301 PRODUCT=FlashAir VENDOR=TOSHIBA MASTERCODE=1234567890AB LOCK=1 FORMATSETMODE=1 APPINFO=0000000000000000 APPAUTOTIME=0 STA_RETRY_CT=0 NOISE_CANCEL=0 Dave
07-20-2015, 03:39 PM
RE: FlashAir Problem?
I have the S9 Autoset. Perhaps it lacks some of the power saving "features" of the A10... As you know, the flashair gets power to be on from the device it is plugged into.
[Vendor] CIPATH=/DCIM/100__TSB/FA000001.JPG VERSION=F19BAW3AW2.00.03 CID=02544d535731364708dd306c7800e601 PRODUCT=FlashAir VENDOR=TOSHIBA APPNAME=flashair WEBDAV=0 TIMEZONE=-28 APPSSID=DARIANET APPNETWORKKEY=********* APPMODE=5 APPAUTOTIME=0 DNSMODE=1 LOCK=1 UPLOAD=1
هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه
Tongue Suck Technique for prevention of mouth breathing:
Practising during the day can help you to keep it at night هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه
07-20-2015, 04:01 PM
(This post was last modified: 07-20-2015, 04:02 PM by DariaVader.)
RE: FlashAir Problem?
Something else to try....
https://sleep.tnet.com/resources/sleepma...lashairfix Wrote:FlashAir Fix for Close Signal Issues
هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه
Tongue Suck Technique for prevention of mouth breathing:
Practising during the day can help you to keep it at night هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه
07-20-2015, 04:46 PM
RE: FlashAir Problem?
My AP is about 20 feet away through 2 walls, but can't hurt to try!
Thanks!
07-20-2015, 05:03 PM
RE: FlashAir Problem?
I think it is more likely that the A10 is "green" and is not powering the flashair sufficiently to keep it online, but idk. Not likely to be "noise" at that distance, IMO. This might be the first time I am happy I got the older S9 rather than the A10
هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه
Tongue Suck Technique for prevention of mouth breathing:
Practising during the day can help you to keep it at night هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه
07-20-2015, 05:16 PM
RE: FlashAir Problem?
I don't know - seems to stay up during the day - I've been hitting it with FlashPAP off and on to see if it has gone away; it has not, and I know my A10 is in powersaving mode.
We'll see what happens in the AM! Thanks again, Dave
RE: FlashAir Problem?
I occasionally have that issue after I stop using the machine and try to download the data. There is no rhythm or reason for it and it doesn't happen every day. I do notice that when I have a power failure (however brief) I have to reinsert the card to connect it with the network again. Do you have your router set to cycle off/on during the night?
Using FlashAir W-03 SD card in machine. You can download your data through wifi with FlashPAP or Sleep Master utilities.
I wanted to learn Binary so I enrolled in Binary 101. I seemed to have missed the first four courses. Stick it to the man, Download OSCAR and take back control of your data! Thanks Ian. Like I didn't have enough Honey-Do projects to tackle.
07-20-2015, 07:42 PM
RE: FlashAir Problem?
No, my router and CPAP are both on UPS supplies, actually. Enough to ride out any outage of an hour and a half or less.
|
« Next Oldest | Next Newest »
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
AirFit F30i Mask Problem | OldTeacher | 22 | 4,929 |
03-23-2024, 03:23 PM Last Post: ButtonNoseBarbie |
|
[CPAP] ResMed Air Sense 10 Auto Off Problem | Buddie43 | 19 | 26,497 |
03-05-2024, 10:50 PM Last Post: Ailyhsaun |
|
Are these flow limits my problem? | k888 | 87 | 5,822 |
02-26-2024, 12:02 PM Last Post: k888 |
|
[Treatment] Are leaks the problem or do I need BIPAP? | TiredDude | 3 | 375 |
02-22-2024, 07:52 PM Last Post: Sleeprider |
|
[CPAP] Is my leak rate a problem? | Kevstuf | 5 | 589 |
02-08-2024, 10:25 AM Last Post: Kevstuf |
|
If nasal congestion is a problem, will this show in my AHI? | canigetawitness1992 | 4 | 429 |
01-29-2024, 09:20 PM Last Post: RNeil |
|
[Equipment] ResMed S9 Elite CPAP – Climate hose problem | drewb6111 | 2 | 259 |
01-28-2024, 08:24 PM Last Post: drewb6111 |